|
|
|
@ -30,23 +30,27 @@
|
|
|
|
|
|
|
|
|
|
|
|
/** \file
|
|
|
|
/** \file
|
|
|
|
*
|
|
|
|
*
|
|
|
|
* PDI Protocol handler, to process V2 Protocol wrapped PDI commands used in Atmel programmer devices.
|
|
|
|
* XPROG Protocol handler, to process V2 Protocol wrapped XPROG commands used in Atmel programmer devices.
|
|
|
|
*/
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
|
|
#define INCLUDE_FROM_PDIPROTOCOL_C
|
|
|
|
#define INCLUDE_FROM_XPROGPROTOCOL_C
|
|
|
|
#include "PDIProtocol.h"
|
|
|
|
#include "XPROGProtocol.h"
|
|
|
|
|
|
|
|
|
|
|
|
#if defined(ENABLE_PDI_PROTOCOL) || defined(__DOXYGEN__)
|
|
|
|
#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
|
|
|
|
/** Base absolute address for the target's NVM controller */
|
|
|
|
/** Base absolute address for the target's NVM controller */
|
|
|
|
uint32_t XPROG_Param_NVMBase = 0x010001C0;
|
|
|
|
uint32_t XPROG_Param_NVMBase = 0x010001C0;
|
|
|
|
|
|
|
|
|
|
|
|
/** Size in bytes of the target's EEPROM page */
|
|
|
|
/** Size in bytes of the target's EEPROM page */
|
|
|
|
uint32_t XPROG_Param_EEPageSize;
|
|
|
|
uint32_t XPROG_Param_EEPageSize;
|
|
|
|
|
|
|
|
|
|
|
|
/** Handler for the CMD_XPROG_SETMODE command, which sets the programmer-to-target protocol used for PDI
|
|
|
|
/** Currently selected XPROG programming protocol */
|
|
|
|
* XMEGA programming (either PDI or JTAG). Only PDI programming is supported.
|
|
|
|
uint8_t XPROG_SelectedProtocol;
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/** Handler for the CMD_XPROG_SETMODE command, which sets the programmer-to-target protocol used for PDI/TPI
|
|
|
|
|
|
|
|
* programming.
|
|
|
|
*/
|
|
|
|
*/
|
|
|
|
void PDIProtocol_XPROG_SetMode(void)
|
|
|
|
void XPROGProtocol_SetMode(void)
|
|
|
|
{
|
|
|
|
{
|
|
|
|
struct
|
|
|
|
struct
|
|
|
|
{
|
|
|
|
{
|
|
|
|
@ -58,52 +62,56 @@ void PDIProtocol_XPROG_SetMode(void)
|
|
|
|
Endpoint_ClearOUT();
|
|
|
|
Endpoint_ClearOUT();
|
|
|
|
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
|
|
|
|
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
|
|
|
|
|
|
|
|
|
|
|
|
Serial_TxByte(SetMode_XPROG_Params.Protocol);
|
|
|
|
XPROG_SelectedProtocol = SetMode_XPROG_Params.Protocol;
|
|
|
|
|
|
|
|
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG_SETMODE);
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG_SETMODE);
|
|
|
|
Endpoint_Write_Byte((SetMode_XPROG_Params.Protocol == XPRG_PROTOCOL_PDI) ? STATUS_CMD_OK : STATUS_CMD_FAILED);
|
|
|
|
Endpoint_Write_Byte((SetMode_XPROG_Params.Protocol != XPRG_PROTOCOL_JTAG) ? STATUS_CMD_OK : STATUS_CMD_FAILED);
|
|
|
|
Endpoint_ClearIN();
|
|
|
|
Endpoint_ClearIN();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/** Handler for the CMD_XPROG command, which wraps up XPROG commands in a V2 wrapper which need to be
|
|
|
|
/** Handler for the CMD_XPROG command, which wraps up XPROG commands in a V2 wrapper which need to be
|
|
|
|
* removed and processed so that the underlying XPROG command can be handled.
|
|
|
|
* removed and processed so that the underlying XPROG command can be handled.
|
|
|
|
*/
|
|
|
|
*/
|
|
|
|
void PDIProtocol_XPROG_Command(void)
|
|
|
|
void XPROGProtocol_Command(void)
|
|
|
|
{
|
|
|
|
{
|
|
|
|
uint8_t XPROGCommand = Endpoint_Read_Byte();
|
|
|
|
uint8_t XPROGCommand = Endpoint_Read_Byte();
|
|
|
|
|
|
|
|
|
|
|
|
switch (XPROGCommand)
|
|
|
|
switch (XPROGCommand)
|
|
|
|
{
|
|
|
|
{
|
|
|
|
case XPRG_CMD_ENTER_PROGMODE:
|
|
|
|
case XPRG_CMD_ENTER_PROGMODE:
|
|
|
|
PDIProtocol_EnterXPROGMode();
|
|
|
|
XPROGProtocol_EnterXPROGMode();
|
|
|
|
break;
|
|
|
|
break;
|
|
|
|
case XPRG_CMD_LEAVE_PROGMODE:
|
|
|
|
case XPRG_CMD_LEAVE_PROGMODE:
|
|
|
|
PDIProtocol_LeaveXPROGMode();
|
|
|
|
XPROGProtocol_LeaveXPROGMode();
|
|
|
|
break;
|
|
|
|
break;
|
|
|
|
case XPRG_CMD_ERASE:
|
|
|
|
case XPRG_CMD_ERASE:
|
|
|
|
PDIProtocol_Erase();
|
|
|
|
XPROGProtocol_Erase();
|
|
|
|
break;
|
|
|
|
break;
|
|
|
|
case XPRG_CMD_WRITE_MEM:
|
|
|
|
case XPRG_CMD_WRITE_MEM:
|
|
|
|
PDIProtocol_WriteMemory();
|
|
|
|
XPROGProtocol_WriteMemory();
|
|
|
|
break;
|
|
|
|
break;
|
|
|
|
case XPRG_CMD_READ_MEM:
|
|
|
|
case XPRG_CMD_READ_MEM:
|
|
|
|
PDIProtocol_ReadMemory();
|
|
|
|
XPROGProtocol_ReadMemory();
|
|
|
|
break;
|
|
|
|
break;
|
|
|
|
case XPRG_CMD_CRC:
|
|
|
|
case XPRG_CMD_CRC:
|
|
|
|
PDIProtocol_ReadCRC();
|
|
|
|
XPROGProtocol_ReadCRC();
|
|
|
|
break;
|
|
|
|
break;
|
|
|
|
case XPRG_CMD_SET_PARAM:
|
|
|
|
case XPRG_CMD_SET_PARAM:
|
|
|
|
PDIProtocol_SetParam();
|
|
|
|
XPROGProtocol_SetParam();
|
|
|
|
break;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/** Handler for the XPROG ENTER_PROGMODE command to establish a PDI connection with the attached device. */
|
|
|
|
/** Handler for the XPROG ENTER_PROGMODE command to establish a connection with the attached device. */
|
|
|
|
static void PDIProtocol_EnterXPROGMode(void)
|
|
|
|
static void XPROGProtocol_EnterXPROGMode(void)
|
|
|
|
{
|
|
|
|
{
|
|
|
|
Endpoint_ClearOUT();
|
|
|
|
Endpoint_ClearOUT();
|
|
|
|
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
|
|
|
|
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
bool NVMBusEnabled;
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
|
|
|
|
|
|
|
|
{
|
|
|
|
/* Enable PDI programming mode with the attached target */
|
|
|
|
/* Enable PDI programming mode with the attached target */
|
|
|
|
PDITarget_EnableTargetPDI();
|
|
|
|
PDITarget_EnableTargetPDI();
|
|
|
|
|
|
|
|
|
|
|
|
@ -117,7 +125,12 @@ static void PDIProtocol_EnterXPROGMode(void)
|
|
|
|
PDITarget_SendByte(PDI_NVMENABLE_KEY[i - 1]);
|
|
|
|
PDITarget_SendByte(PDI_NVMENABLE_KEY[i - 1]);
|
|
|
|
|
|
|
|
|
|
|
|
/* Wait until the NVM bus becomes active */
|
|
|
|
/* Wait until the NVM bus becomes active */
|
|
|
|
bool NVMBusEnabled = PDITarget_WaitWhileNVMBusBusy();
|
|
|
|
NVMBusEnabled = PDITarget_WaitWhileNVMBusBusy();
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
else
|
|
|
|
|
|
|
|
{
|
|
|
|
|
|
|
|
// TODO
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG);
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG);
|
|
|
|
Endpoint_Write_Byte(XPRG_CMD_ENTER_PROGMODE);
|
|
|
|
Endpoint_Write_Byte(XPRG_CMD_ENTER_PROGMODE);
|
|
|
|
@ -128,16 +141,23 @@ static void PDIProtocol_EnterXPROGMode(void)
|
|
|
|
/** Handler for the XPROG LEAVE_PROGMODE command to terminate the PDI programming connection with
|
|
|
|
/** Handler for the XPROG LEAVE_PROGMODE command to terminate the PDI programming connection with
|
|
|
|
* the attached device.
|
|
|
|
* the attached device.
|
|
|
|
*/
|
|
|
|
*/
|
|
|
|
static void PDIProtocol_LeaveXPROGMode(void)
|
|
|
|
static void XPROGProtocol_LeaveXPROGMode(void)
|
|
|
|
{
|
|
|
|
{
|
|
|
|
Endpoint_ClearOUT();
|
|
|
|
Endpoint_ClearOUT();
|
|
|
|
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
|
|
|
|
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
|
|
|
|
|
|
|
|
{
|
|
|
|
/* Clear the RESET key in the RESET PDI register to allow the XMEGA to run */
|
|
|
|
/* Clear the RESET key in the RESET PDI register to allow the XMEGA to run */
|
|
|
|
PDITarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
|
|
|
|
PDITarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
|
|
|
|
PDITarget_SendByte(0x00);
|
|
|
|
PDITarget_SendByte(0x00);
|
|
|
|
|
|
|
|
|
|
|
|
PDITarget_DisableTargetPDI();
|
|
|
|
PDITarget_DisableTargetPDI();
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
else
|
|
|
|
|
|
|
|
{
|
|
|
|
|
|
|
|
// TODO
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG);
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG);
|
|
|
|
Endpoint_Write_Byte(XPRG_CMD_LEAVE_PROGMODE);
|
|
|
|
Endpoint_Write_Byte(XPRG_CMD_LEAVE_PROGMODE);
|
|
|
|
@ -146,7 +166,7 @@ static void PDIProtocol_LeaveXPROGMode(void)
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/** Handler for the XPRG ERASE command to erase a specific memory address space in the attached device. */
|
|
|
|
/** Handler for the XPRG ERASE command to erase a specific memory address space in the attached device. */
|
|
|
|
static void PDIProtocol_Erase(void)
|
|
|
|
static void XPROGProtocol_Erase(void)
|
|
|
|
{
|
|
|
|
{
|
|
|
|
uint8_t ReturnStatus = XPRG_ERR_OK;
|
|
|
|
uint8_t ReturnStatus = XPRG_ERR_OK;
|
|
|
|
|
|
|
|
|
|
|
|
@ -164,6 +184,8 @@ static void PDIProtocol_Erase(void)
|
|
|
|
|
|
|
|
|
|
|
|
uint8_t EraseCommand = XMEGA_NVM_CMD_NOOP;
|
|
|
|
uint8_t EraseCommand = XMEGA_NVM_CMD_NOOP;
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
|
|
|
|
|
|
|
|
{
|
|
|
|
/* Determine which NVM command to send to the device depending on the memory to erase */
|
|
|
|
/* Determine which NVM command to send to the device depending on the memory to erase */
|
|
|
|
if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_CHIP)
|
|
|
|
if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_CHIP)
|
|
|
|
EraseCommand = XMEGA_NVM_CMD_CHIPERASE;
|
|
|
|
EraseCommand = XMEGA_NVM_CMD_CHIPERASE;
|
|
|
|
@ -185,6 +207,11 @@ static void PDIProtocol_Erase(void)
|
|
|
|
/* Erase the target memory, indicate timeout if ocurred */
|
|
|
|
/* Erase the target memory, indicate timeout if ocurred */
|
|
|
|
if (!(XMEGANVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
|
|
|
|
if (!(XMEGANVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
|
|
|
|
ReturnStatus = XPRG_ERR_TIMEOUT;
|
|
|
|
ReturnStatus = XPRG_ERR_TIMEOUT;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
else
|
|
|
|
|
|
|
|
{
|
|
|
|
|
|
|
|
// TODO
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG);
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG);
|
|
|
|
Endpoint_Write_Byte(XPRG_CMD_ERASE);
|
|
|
|
Endpoint_Write_Byte(XPRG_CMD_ERASE);
|
|
|
|
@ -193,7 +220,7 @@ static void PDIProtocol_Erase(void)
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/** Handler for the XPROG WRITE_MEMORY command to write to a specific memory space within the attached device. */
|
|
|
|
/** Handler for the XPROG WRITE_MEMORY command to write to a specific memory space within the attached device. */
|
|
|
|
static void PDIProtocol_WriteMemory(void)
|
|
|
|
static void XPROGProtocol_WriteMemory(void)
|
|
|
|
{
|
|
|
|
{
|
|
|
|
uint8_t ReturnStatus = XPRG_ERR_OK;
|
|
|
|
uint8_t ReturnStatus = XPRG_ERR_OK;
|
|
|
|
|
|
|
|
|
|
|
|
@ -221,6 +248,8 @@ static void PDIProtocol_WriteMemory(void)
|
|
|
|
uint8_t EraseBuffCommand = XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF;
|
|
|
|
uint8_t EraseBuffCommand = XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF;
|
|
|
|
bool PagedMemory = true;
|
|
|
|
bool PagedMemory = true;
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
|
|
|
|
|
|
|
|
{
|
|
|
|
if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_APPL)
|
|
|
|
if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_APPL)
|
|
|
|
{
|
|
|
|
{
|
|
|
|
WriteCommand = XMEGA_NVM_CMD_WRITEAPPSECPAGE;
|
|
|
|
WriteCommand = XMEGA_NVM_CMD_WRITEAPPSECPAGE;
|
|
|
|
@ -261,6 +290,11 @@ static void PDIProtocol_WriteMemory(void)
|
|
|
|
{
|
|
|
|
{
|
|
|
|
ReturnStatus = XPRG_ERR_TIMEOUT;
|
|
|
|
ReturnStatus = XPRG_ERR_TIMEOUT;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
else
|
|
|
|
|
|
|
|
{
|
|
|
|
|
|
|
|
// TODO
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG);
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG);
|
|
|
|
Endpoint_Write_Byte(XPRG_CMD_WRITE_MEM);
|
|
|
|
Endpoint_Write_Byte(XPRG_CMD_WRITE_MEM);
|
|
|
|
@ -271,7 +305,7 @@ static void PDIProtocol_WriteMemory(void)
|
|
|
|
/** Handler for the XPROG READ_MEMORY command to read data from a specific address space within the
|
|
|
|
/** Handler for the XPROG READ_MEMORY command to read data from a specific address space within the
|
|
|
|
* attached device.
|
|
|
|
* attached device.
|
|
|
|
*/
|
|
|
|
*/
|
|
|
|
static void PDIProtocol_ReadMemory(void)
|
|
|
|
static void XPROGProtocol_ReadMemory(void)
|
|
|
|
{
|
|
|
|
{
|
|
|
|
uint8_t ReturnStatus = XPRG_ERR_OK;
|
|
|
|
uint8_t ReturnStatus = XPRG_ERR_OK;
|
|
|
|
|
|
|
|
|
|
|
|
@ -291,9 +325,16 @@ static void PDIProtocol_ReadMemory(void)
|
|
|
|
|
|
|
|
|
|
|
|
uint8_t ReadBuffer[256];
|
|
|
|
uint8_t ReadBuffer[256];
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
|
|
|
|
|
|
|
|
{
|
|
|
|
/* Read the target's memory, indicate timeout if occurred */
|
|
|
|
/* Read the target's memory, indicate timeout if occurred */
|
|
|
|
if (!(XMEGANVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length)))
|
|
|
|
if (!(XMEGANVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length)))
|
|
|
|
ReturnStatus = XPRG_ERR_TIMEOUT;
|
|
|
|
ReturnStatus = XPRG_ERR_TIMEOUT;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
else
|
|
|
|
|
|
|
|
{
|
|
|
|
|
|
|
|
// TODO
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG);
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG);
|
|
|
|
Endpoint_Write_Byte(XPRG_CMD_READ_MEM);
|
|
|
|
Endpoint_Write_Byte(XPRG_CMD_READ_MEM);
|
|
|
|
@ -308,7 +349,7 @@ static void PDIProtocol_ReadMemory(void)
|
|
|
|
/** Handler for the XPROG CRC command to read a specific memory space's CRC value for comparison between the
|
|
|
|
/** Handler for the XPROG CRC command to read a specific memory space's CRC value for comparison between the
|
|
|
|
* attached device's memory and a data set on the host.
|
|
|
|
* attached device's memory and a data set on the host.
|
|
|
|
*/
|
|
|
|
*/
|
|
|
|
static void PDIProtocol_ReadCRC(void)
|
|
|
|
static void XPROGProtocol_ReadCRC(void)
|
|
|
|
{
|
|
|
|
{
|
|
|
|
uint8_t ReturnStatus = XPRG_ERR_OK;
|
|
|
|
uint8_t ReturnStatus = XPRG_ERR_OK;
|
|
|
|
|
|
|
|
|
|
|
|
@ -324,6 +365,8 @@ static void PDIProtocol_ReadCRC(void)
|
|
|
|
uint8_t CRCCommand = XMEGA_NVM_CMD_NOOP;
|
|
|
|
uint8_t CRCCommand = XMEGA_NVM_CMD_NOOP;
|
|
|
|
uint32_t MemoryCRC;
|
|
|
|
uint32_t MemoryCRC;
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
|
|
|
|
|
|
|
|
{
|
|
|
|
/* Determine which NVM command to send to the device depending on the memory to CRC */
|
|
|
|
/* Determine which NVM command to send to the device depending on the memory to CRC */
|
|
|
|
if (ReadCRC_XPROG_Params.CRCType == XPRG_CRC_APP)
|
|
|
|
if (ReadCRC_XPROG_Params.CRCType == XPRG_CRC_APP)
|
|
|
|
CRCCommand = XMEGA_NVM_CMD_APPCRC;
|
|
|
|
CRCCommand = XMEGA_NVM_CMD_APPCRC;
|
|
|
|
@ -335,6 +378,11 @@ static void PDIProtocol_ReadCRC(void)
|
|
|
|
/* Perform and retrieve the memory CRC, indicate timeout if occurred */
|
|
|
|
/* Perform and retrieve the memory CRC, indicate timeout if occurred */
|
|
|
|
if (!(XMEGANVM_GetMemoryCRC(CRCCommand, &MemoryCRC)))
|
|
|
|
if (!(XMEGANVM_GetMemoryCRC(CRCCommand, &MemoryCRC)))
|
|
|
|
ReturnStatus = XPRG_ERR_TIMEOUT;
|
|
|
|
ReturnStatus = XPRG_ERR_TIMEOUT;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
else
|
|
|
|
|
|
|
|
{
|
|
|
|
|
|
|
|
// TODO
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG);
|
|
|
|
Endpoint_Write_Byte(CMD_XPROG);
|
|
|
|
Endpoint_Write_Byte(XPRG_CMD_CRC);
|
|
|
|
Endpoint_Write_Byte(XPRG_CMD_CRC);
|
|
|
|
@ -349,10 +397,10 @@ static void PDIProtocol_ReadCRC(void)
|
|
|
|
Endpoint_ClearIN();
|
|
|
|
Endpoint_ClearIN();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/** Handler for the XPROG SET_PARAM command to set a PDI parameter for use when communicating with the
|
|
|
|
/** Handler for the XPROG SET_PARAM command to set a XPROG parameter for use when communicating with the
|
|
|
|
* attached device.
|
|
|
|
* attached device.
|
|
|
|
*/
|
|
|
|
*/
|
|
|
|
static void PDIProtocol_SetParam(void)
|
|
|
|
static void XPROGProtocol_SetParam(void)
|
|
|
|
{
|
|
|
|
{
|
|
|
|
uint8_t ReturnStatus = XPRG_ERR_OK;
|
|
|
|
uint8_t ReturnStatus = XPRG_ERR_OK;
|
|
|
|
|
|
|
|
|
|
|
|
|
Dean Camera
15 years ago