be2a7d4598
Move over message ID specific header data to unions inside the standard TMC header structure, so that all header data is read in one chunk in the incomplete TMC demo.
15 years ago
cd39c38d5f
Rename reserved members of all structs so that they are uniformly named across all demos/projects/bootloaders.
...
Added start of the Incomplete TMC demo's command parser code.
15 years ago
0803cf00ac
Add missing INTERRUPT_CONTROL_ENDPOINT compile time option to the Mass Storage device projects/demos and incomplete Test and Measurement Class demo, which was accidentally removed during the makefile updates.
...
Alter Test and Measurement Class demo's request handlers to accept, process and correctly return the fields indicated in the specification.
15 years ago
4c9425c0d5
Added periodic flush timer to the Benito project. Alter the serial transmission code so that sent bytes do not block the remainder of the main program code from running.
15 years ago
2461ae508c
Future proof the XPROG protocol of the AVRISP-MKII project, so that non PDI and TPI requests return failure.
15 years ago
6bda628718
Update all demos, projects and bootloaders to indent all function parameters, one per line, for better readability.
...
Add missing const qualifiers to the demos.
15 years ago
97143bf814
Add missing const qualifiers to class drivers.
...
Indent core library function parameters so that there is only one parameter per line, to increase readability.
15 years ago
6b5e684c77
Update makefiles to use the latest WinAVR/Atmel toolchain makefile template.
...
Add new module source variables to the library core makefile, so that module sources can be added to a project's makefile on a per-module rather than per-file basis.
15 years ago
42ac34b484
Change over all makefiles to use C99 standards mode, rather than C99 + GNU Extensions.
15 years ago
9299735c75
Disable strict aliasing explicitly in the project makefiles, as this is apparently enabled by default in newer AVR-GCC builds, and aliasing is used heavily for type-punning through the LUFA and third party library's codebase.
15 years ago
f4710f6f86
Removed the automated checking of event names in the demo, project and bootloader makefiles due to inconsistancies between the behaviour of the command line tools used to perform the check on each platform.
...
Removed the internal endpoint and pipe memory allocation macros, as this is already performed directly in the code. Simplify the endpoint and pipe reset procedure.
15 years ago
dfe50ff349
Added ability to set the serial baud rate via the user's terminal in the XPLAINBridge project.
15 years ago
40631e9fe5
Fix pointer aliasing warning in the Mass Storage demos.
15 years ago
e2e1fe5aad
Fixed possible buffer overrun in the XPLAINBridge project when in serial bridge mode.
15 years ago
7cef08e10e
Fixed HID device class driver still using PrevReportINBuffer for GetReport control requests even when it has been set to NULL by the user application (thanks to Axel Rohde).
15 years ago
d83cc9ac80
Change AVRISP-MKII and XPLAINBridge descriptors to indicate that the device is bus-powered only. Add compile time options to reduce the compiled size of the firmware.
15 years ago
666c0fa4c3
Remove the timeout period extension code from the AVRISP project, as no single command should ever exceed the maximum timeout period. Extend timeout period to 1 second per command, so that an accidental timeout will never occur.
15 years ago
0313034245
Added const attributes to some of the class driver function parameters that were missing it.
15 years ago
3904c1a606
Add remaining AVRStudio project files to the library projects.
15 years ago
ac61b81a0b
Add first lot of AVRStudio project files for some of the library projects.
15 years ago
d3e00ce1ec
Rename the AVRISP main source files to AVRISP-MKII so that it matches the project name. Add AVRStudio project file for the AVRISP-MKII project.
15 years ago
ae9dab1398
Add missing clean_doxygen phony targets to the project makefiles.
15 years ago
8de31cbb78
Reduce prescaler of the flush timer in the USBtoSerial demo, so that buffer overruns will not occur regardless of hardware and baud rate settings.
15 years ago
0bcc82ac28
Alter the ring buffer library headers to have both atomic and non-atomic insertion/removal routines. Modify the existing projects so that buffer operations performed in an ISR use the shorted non-atomic versions, as they are already performed in a blocking ISR.
...
Alter USBtoSerial demo so that it does not enter a blocking loop to send data from the USB to the USART, as this can cause dropped bytes in the reception code if large amounts of data are sent in both directions at the same time. Added a flush timer to the USBtoSerial code for the USART to USB interface, so that multiple bytes can be sent in the same USB packet.
15 years ago
3fd246041b
Add glitch protection to the software UART in the XPLAINBridge project code, so that very short glitches on the RX line don't cause a frame reception to occur.
15 years ago
229935184b
Major changes to the XPLAINBridge software UART code for performance and reliability. New code reduces the number of missed characters and misread characters.
15 years ago
2b0d93c129
Correct misspellings in the Bluetooth demo code.
15 years ago
c326fe9605
Rewrote the implementation of the SwapEndian_16() and SwapEndian_32() functions so that they compile down in most instances to minimal loads and stores rather than complicated shifts.
...
Fixed SCSI.c implementations of all the demos/projects casting the block count to a 32-bit temporary before calling SwapEndian_16().
15 years ago
70983caea5
Move out Bluetooth stack callback functions to a seperate BluetoothEvents.c/.h set of files for clarity in the Incomplete BluetoothHost demo. Add a new stack callback for opened ACL channels, make the demo save the RFCOMM channel when opened so that it does not have to search for it on each iteration of the main program loop.
15 years ago
8b053d6ba5
Added new Drivers/USB/LowLevel/Device.c file to house Device mode specific functions that are more complicated than simple macros. Moved USB_Device_SendRemoteWakeup() to the new Device.c source file and corrected it to unfreeze and restart the USB controller clock before issuing a Remote Wakeup request.
...
Removed the USB_Device_IsRemoteWakeupSent() and USB_Device_IsUSBSuspended() macros, as they are now obsolete.
15 years ago
d29a408ffd
Add default "all" makefile targets to the demo tree makefiles.
15 years ago
016a4c068a
Make loops in AVRISP-MKII Clone project's XPROG protocol infinite rather than looping on the timeout value, as this is already checked inside the loop anyway.
15 years ago
55d7e1e65b
Make XPLAINBridge serial bridge much more reliable for the reception of characters from the XMEGA through the software UART interface.
15 years ago
ad29e79b94
Maximise the size of the ring buffers in the Benito/XPLAINBridge/USBtoSerial projects, so that they should never become full under normal conditions.
15 years ago
988604b25d
Moved calls to V2Params_UpdateParamValues() out of the main AVRISP-MKII and XPLAINBridge project loops and into the AVRISP management function.
15 years ago
51c2dcf3b0
Fixed broken PDI EEPROM Section Erase functionality in the AVRISP-MKII project.
15 years ago
711542ee89
Spell check code and manual pages. Remove custom Doxygen CSS stylesheet, as the new 1.7 Doxygen's default stylesheet is much better.
15 years ago
a14ece5f57
Change over Doxygen \note documentation to \pre where applicable.
15 years ago
27fb44268f
Update TemperatureDataLogger and Webserver projects to the latest FATFS library version.
15 years ago
d57e7369a2
Oops - temp code left in the XPLAINBridge project which prevented it from entering programmer mode.
15 years ago
036a156ff4
Slight improvements to the reliability of the software UART in the XPLAINBridge project.
15 years ago
5fa0e9c007
Oops - light weight ring buffer documentation used \ref instead of \param to document function parameters.
15 years ago
b02217d745
Add missing documentation to the lightweight ring buffer code in the XPLAINBridge project.
15 years ago
c2e340320c
Document lightweight ring buffer header files.
15 years ago
2dabb4e55f
Add the svn:eol-style property onto new files which where missing it to ensure uniform line endings.
15 years ago
6d53cdba83
More documentation fixes.
15 years ago
fc92f9969c
Minor documentation cleanups.
15 years ago
008e0e2e0a
Add start of RFCOMM service layer to the incomplete BluetoothHost demo.
...
Reduce the size of the attribute search list from 15 ranges to 8 to save RAM.
15 years ago
3b95b8dedc
Added new VTARGET_REF_VOLTS and VTARGET_SCALE_FACTOR compile time defines to the AVRISP-MKII programmer project to set the VTARGET reference voltage and scale factor.
...
Fixed XPLAINBridge project not correctly reading the XMEGA's supply voltage when reporting back to the host.
15 years ago
8d993afc53
Replace ring buffer library in Benito and USBtoSerial projects with the new lightweight ring buffer header to improve reliability.
15 years ago
Dean Camera