113df4878b
Fix up MissileLauncher demo's ConfigurationDescriptor.c so that it uses the new USB_GetDeviceConfigDescriptor() function parameters.
16 years ago
0f51db56c0
Replace -finline-limit with -fno-inline-small-functions in project makefiles.
16 years ago
244c86429b
Move ADC VTARGET sampling to a new V2Params_UpdateParamValues() in the AVRISP project so that there is a central place where all non-PC set target values can be updated easily.
16 years ago
4bb236e9a0
Increase AVRISP command timeout to 240ms up from 150ms to prevent some ISP commands from timing out too early.
...
Add check to the PROGRAM FLASH ISP and PROGRAM EEPROM ISP handler to return an explicit error when the host attempts to write more data than the device is able to buffer.
16 years ago
489515fbbf
Make WaitWhileBusy function in the AVRISP project more explicit about how it sends and receives the busy check command.
...
Reduce size of PROGRAM FLASH ISP or PROGRAM EEPROM ISP buffer to 256 bytes to prevent blowing the stack on the smallest USB AVR models.
16 years ago
922e60192d
Condensed SCSI command functions in the LowLevel Mass Storage Host demo, to save on FLASH space.
...
Fixed issue in AVRISP project where the target RESET line was being toggled before it was tristated, causing problems synchronising to some targets (thanks to Mike Alex).
16 years ago
f7cde02b80
Added extra note about missing OUT endpoint configuration to the HID Device mode Class driver.
...
Added pinout information to the AVRISP project.
16 years ago
f547eb3608
Optimized Endpoint_Read_Word_* and Pipe_Read_Word_* macros to reduce compiled size.
...
Fixed Programmer's Notepad project file to reflect new location of AVRISP project.
16 years ago
17d06b8494
Add VTARGET level detection to the AVRISP project on supported AVR models.
16 years ago
244bba2097
Make AVRISP project build again - fix incorrect preprocessor directive in V2Protocol.c, fix makefile LUFA_PATH.
16 years ago
cfe054474f
Partial Commit: Remove now empty Projects\Incomplete directory and add the new AVRISP project to the Projects directory makefile.
16 years ago
271be037b7
Partial Commit: Move AVRISP project out of the Projects\Incomplete directory.
16 years ago
8aee4cb2f2
Add function documentation to the AVRISP project.
16 years ago
73801c73a1
Finished preliminary AVRISP project - all V2 protocol commands now work correctly for basic operations.
16 years ago
4742e95a3f
Fixed AVRISP V2 Protocol handler for the READ_FLASH_ISP and READ_EEPROM_ISP handler - can now correctly read back device data. Programming command handler is still broken, although first page is written correctly to FLASH in paged write mode.
16 years ago
6d1adf7339
Updated Benito project -- added hardware interrupt and software buffering for serial data reception to prevent missed characters, condensed pulse generation counters into a struct for clarity.
...
Added check to CDC_Device_BytesReceived() to ensure 0 is returned when device is not enumerated to a host.
Move AVRISP project's V2Protocol_DelayMS() function to be static inline, as it is now very minimal. Added extra project doxygen documentation.
16 years ago
f070902bdb
Fix endianness of LOAD_ADDRESS command data, add correct PROGRAM_FLASH_ISP/PROGRAM_EEPROM_ISP polling and endpoint bank clearing, add hardware delays/timeouts to the V2 Protocol handler in the AVRISP project.
16 years ago
8cb8f1cfdd
Switch to hardware delays and timeouts via a hardware timer in the V2 Protocol handler.
...
More additions to the PROGRAM_FLASH_ISP and PROGRAM_EEPROM_ISP commands, although neither work correctly yet.
Added dummy RESET_PROTECTIONS handler to prevent the Atmel driver from crashing when the command returns an UNKNOWN_COMMAND error code.
16 years ago
92adb00f8e
Added PROGRAM_FLASH_ISP and PROGRAM_EEPROM_ISP handler code to the V2 Protocol handler in the AVRISP project, programming complete checks not yet complete.
16 years ago
f9c0357b73
Fixed V2 Protocol READ_FLASH_ISP and READ_EEPROM_ISP handler code in the AVRISP project.
16 years ago
bff4dbe189
Fix to V2 Protocol for Fuse/Sig/Lock byte read -- off by one error on the array when writing back the response from the device.
...
FLASH/EEPROM reading and writing currently broken and unfinished, respectively.
16 years ago
dbb5f249bd
Added V2 protocol handlers for the READ and WRITE memory commands in the AVRISP project. Finished READ command handler, skeleton WRITE handler implemented.
16 years ago
7e74bd3ea2
Moved out target-related V2 protocol commands into a seperate file for the AVRISP project.
...
Added Load Extended Command functionality to the LOAD ADDRESS V2 Protocol command handler for devices with more than 64KB of memory.
16 years ago
f229502d9a
Fixed AVRISP programmer demo -- can now connect to a target and read/write Sig/Lock/Fuse/OSCCAL bytes successfully.
...
Changed SPI_Init() to allow for the clock polarity and data sample modes to be set.
Changed Dataflash_Init() to no longer call SPI_Init() automatically.
16 years ago
1e8df8951a
Added V2Protocol handlers to the AVRISP project to enter/exit programming mode, and read/write fuses, lockbits, OSCCAL and Signature bytes.
...
Added ShutDown functions for all hardware peripheral drivers, so that peripherals can be turned off after use.
16 years ago
5acf23b254
Renamed Projects/Unfinished to Projects/Incomplete for consistancy.
16 years ago
2f95eea146
Add LOAD ADDRESS command parsing to the V2 Protocol hander in the AVRISP project.
...
Fix up references to functions in the Endpoint/Pipe documentation.
16 years ago
a9602f0250
Change spinloop in the AVRISP project Unknown V2 Protocol Command handler to use Endpoint_WaitUntilReady() instead to prevent infinite loops.
16 years ago
fa8beef82d
Moved out the handling of V2 Protocol parameters to a seperate set of files. Added parameter privellages, so that an error can be returned to the host when trying to perform a get/set value action on a parameter without the correct privellages.
16 years ago
32cc2b8d4d
Reorganise V2Protocol.c, add in function to assert or de-assert target RESET pin.
16 years ago
04354ffcad
Added handler for the V2 Protocol SPI_MULTI command to the AVRISP Programmer project.
...
Added documentation of the makefile CDEFS values to the MagStripe project.
16 years ago
083d3615d3
Corrections to the unfinished AVRISP Programmer project to allow AVRStudio to connect to it.
16 years ago
6d99486791
Fixed invalid data being returned when a GetStatus request is issued in Device mode with an unhandled data recipient.
...
Fix up Programmers Notepad Project file to show new Projects directory layout. Remove now moved AVRISP project from the Projects directory makefile.
16 years ago
0934f5c185
Move AVRISP Programmer project to a new Unfinished subdirectory of Project while it is under development.
16 years ago
bbcdaaa6dc
Enhancements to the AVRISP Programmer project to attempt to get AVRStudio to communicate with the device.
16 years ago
ecd82778cf
Added beginnings of a new AVRISP-MKII clone project.
...
Added new Endpoint_SetEndpointDirection() macro to set the current endpoint direction for bidirectional endpoints.
Renamed internal USB_INT_ENDPOINT_SETUP macro to USB_INT_RXSTPI to fit in with the rest of the interrupt vector macros.
16 years ago
b71ff7c8cd
Added new EVENT_USB_Device_StartOfFrame() event, controlled by the new USB_Device_EnableSOFEvents() and USB_Device_DisableSOFEvents() macros to give bus-synchronised millisecond interrupts when in USB device mode.
16 years ago
25ddbb9e3b
Adjust endpoint polling intervals for HID demos, to make them compliant with the 10ms minimum polling period for Low Speed devices.
16 years ago
99abd1a8b7
Added explicit attribute masks to the device mode demos' descriptors.
16 years ago
85c2716f2d
Make Benito ping-pong LED code more explicit, using masks of the TX and RX LED masks for ping-pong toggle rather than the ambiguous LED "Busy" mask.
...
Fix incorrect event name in MassStorageHost.c.
16 years ago
3848482532
Add Benito board LED driver to the Benito Programmer project.
16 years ago
99c447c754
Fixed issue in USBtoSerial demos where the USART Rx line was not having its pullup enabled at startup, leading to noise being received from the Rx pin when left floating.
...
Removed unused relative Common.h header include from the DriverStubs board stub drivers.
Fixed Benito programmer, use the correct LED functions where needed to ensure correct status display at all times.
16 years ago
c5038f1bf4
Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.
...
Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.
Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.
16 years ago
6f4cc344ab
Rename TOTAL_NUM_CONFIGURATIONS to FIXED_NUM_CONFIGURATIONS, to match the existing FIXED_CONTROL_ENDPOINT_SIZE compile time option. Add FIXED_NUM_CONFIGURATIONS to the descriptors of each project using the option.
16 years ago
eb41086947
Fix demos based on the device mode HID class driver, as well as the driver itself. Changed HID device class driver to require the user to give a buffer and size to hold the previously generated report, for comparison purposes, and altered the prototype of the CALLBACK_HID_Device_CreateHIDReport() function so that reports can be sent to the host even if there are no apparent changes (useful for relative movements in mice, etc.).
16 years ago
7df6b9563c
Add new HID_Device_MillisecondElapsed() function to the HID device Class driver, to move the burden of managing the Idle period of each instance to the library and not the user application.
16 years ago
72932e2780
Fix to HID device mode Class driver, so that new reports are compared against the old, and updated reports made within the idle period are sent immediately to the host.
16 years ago
6928f17b64
Extend the automatic serial number descriptor code to read out and send all 10 bytes (20 characters) of the internal serial number on supported AVRs, rather than just the first 6 bytes (12 characters).
16 years ago
3472af91a5
Change project makefiles so that the current target settings and not just the board selection is printed during the build process.
...
Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.
16 years ago
61ff4824a9
Changed AudioOutput demos to explicitly use timer 3 - the smaller USB AVRs where timer 1 was needed instead did not have the endpoint size neccesary for good audio throughput anyway.
...
Fix Benito documentation indicating erronously that the project used the HID USB class instead of the CDC class.
16 years ago
Dean Camera