20943fa1aa
Add AVRStudio 4 project files to the LowLevel Host mode demos.
15 years ago
1167b69943
Add missing eol-style properties to new source files.
15 years ago
ae9dab1398
Add missing clean_doxygen phony targets to the project makefiles.
15 years ago
2b0d93c129
Correct misspellings in the Bluetooth demo code.
15 years ago
f6e84eabce
Add more doxygen function documentation to the RFCOMM layer.
15 years ago
00fa6aa2db
Oops - ACL layer Bluetooth_SendPacket() function should check and allow NULL channels, since that indicates a control channel request.
...
Fix up Doxgen documentation for the Bluetooth stack code.
15 years ago
6276d5f82a
Rename Bluetooth stack function parameters to clearly indicate what sort of Bluetooth channel (ACL, RFCOMM) is required for each parameter, to make the code easier to read.
...
Add a new RFCOMM_ChannelSignalsReceived() Bluetooth stack callback from the RFCOMM layer for when the remote device sends new terminal control signals.
Fix RFCOMM_SendData() not aborting correctly when the requested RFCOMM channel is not found.
15 years ago
ba711d6759
Oops - fix errors in the MassStorageKeyboard SCSI driver file due to incorrect copy/paste.
15 years ago
c326fe9605
Rewrote the implementation of the SwapEndian_16() and SwapEndian_32() functions so that they compile down in most instances to minimal loads and stores rather than complicated shifts.
...
Fixed SCSI.c implementations of all the demos/projects casting the block count to a 32-bit temporary before calling SwapEndian_16().
15 years ago
2b0e86243f
Add a new RFCOMM_ChannelOpened() callback event for when logical RFCOMM channels are opened in the BluetoothHost demo. Make the demo echo back sent characters to the remote device.
15 years ago
c37fd0ef91
Add a new RFCOMM service callback for when new data has been received on a valid RFCOMM channel.
15 years ago
70983caea5
Move out Bluetooth stack callback functions to a seperate BluetoothEvents.c/.h set of files for clarity in the Incomplete BluetoothHost demo. Add a new stack callback for opened ACL channels, make the demo save the RFCOMM channel when opened so that it does not have to search for it on each iteration of the main program loop.
15 years ago
8b053d6ba5
Added new Drivers/USB/LowLevel/Device.c file to house Device mode specific functions that are more complicated than simple macros. Moved USB_Device_SendRemoteWakeup() to the new Device.c source file and corrected it to unfreeze and restart the USB controller clock before issuing a Remote Wakeup request.
...
Removed the USB_Device_IsRemoteWakeupSent() and USB_Device_IsUSBSuspended() macros, as they are now obsolete.
15 years ago
31a34154db
Move out RFCOMM channel structure init code to a seperate routine, to save on compiled code space and to prevent copy-paste errors.
15 years ago
fbabecee66
Add RFCOMM service routine, to send pending configuration requests on RFCOMM channels. Add in RFCOMM channel config flags, to determine which configuration commands have been sent and received.
...
Add a new RFCOMM_SendChannelSignals() function to transmit a change in V24 terminal handshake lines to the receiving device.
Prevent SABM packets sent to the control DLCI in the RFCOMM layer from creating a new channel entry, as the control DLCI does not have connection data associated with it.
Fix up MSC control packet handling so that received responses can be acknowledged correctly, so that the RFCOMM layer can record when the receiving device has ACKed a sent change in V24 terminal handshake lines.
15 years ago
b656540468
Make Bluetooth ACL channel searches skip over closed (invalid) channels. RFCOMM channels are considered invalid when the channel state is closed, not when the DLCI is zero - fix incorrect code.
15 years ago
d29a408ffd
Add default "all" makefile targets to the demo tree makefiles.
15 years ago
26afe5fe9e
Fix Doxygen formatting of parameters for the CALLBACK_HID_Device_CreateHIDReport() function in the ClassDriver HID device demos.
15 years ago
4b952d479a
Split RFCOMM channel signals into Remote and Local pairs. Use memcpy() to copy over data from the command parameters to the RFCOMM response parameters.
...
Ensure that only the valid parameter bytes are sent back in response to MSC commands.
15 years ago
2eff731ecf
Add TEST RFCOMM command handler. Remove the RFCOMM channel UseUIFrame element, as the Bluetooth adaptions to RFCOMM only allow UIH frames to be used.
15 years ago
559af02204
Use a bitmask instead of an array of bools in the SDP UUID List matching algorithm to reduce the compiled code size and stack used.
15 years ago
e621ab33be
Added new pgm_read_ptr() macro to Common.h for reading of pointers out of flash memory space.
...
Added new SWAPENDIAN_16() and SWAPENDIAN_32() macros to Common.h for statically initialized variables at compile time.
15 years ago
69dc32c5f0
Fix compile and Doxygen errors due to the spell-check changes in the source code.
15 years ago
13ea700b35
Rename RFCOMM_GetFrameDataLength() to RFCOMM_GetVariableFieldValue() as it is multi-purpose, and modify it to move the buffer pointer itself rather than relying on the caller.
...
Make RFCOMM_GetChannelData() return NULL if the required channel DLCI is found, but the channel is closed.
Add modem signals (BREAK, DCD, etc.) to the channel state array, and add in a handler for the Modem Status RFCOMM control command.
15 years ago
f5d079462d
Changed the RFCOMM-specific ItemProtocolChannel_t type to a more generic ItemProtocol_8BitParam_t name, and added a new ItemProtocol_16BitParam_t to the SDP protocol type defines.
15 years ago
3125fd5f4f
Add RFCOMM channel configuration parsing and channel states to the incomplete BluetoothHost demo.
...
Add missing BT_* prefix to the Bluetooth stack's channel state enum values.
15 years ago
a14ece5f57
Change over Doxygen \note documentation to \pre where applicable.
15 years ago
67bc625109
Split out the RFCOMM Control Channel command processing code into a seperate set of files for clarity.
15 years ago
b522e35965
Rename the incomplete Bluetooth Host demo's ServiceDiscoveryProtocol.c/.h files to SDP.c/.h. Fix compile errors in RFCOMM.c/.h.
15 years ago
637c7b01d0
More RFCOMM layer additions - begin to add multiplexer channel state variables.
15 years ago
931ca42a6e
Minor fixes to demos to add in some missing comments, printf() formatting. Make incomplete Bluetooth demo indicate connections visually via the board LEDs.
15 years ago
e930738247
Add stub RFCOMM command handlers. Move out RFCOMM frame length and data pointer calculations to the master RFCOMM frame reception routine, instead of inside each frame type handler function.
15 years ago
f92229697f
More RFCOMM layer implementation - fix FCS calculation, add in start of control channel command processing.
15 years ago
34e0fed4ca
Make the RFCOMM_SendFrame() function correctly generate frames from the input parameters, change addressing to use the raw DLCI address plus flags.
15 years ago
361e1ec1d8
Refactor out RFCOMM packet send code into a seperate function.
15 years ago
7aec6cba1a
Fix incorrect copyright attribution on the class-driver keyboard demos due to header copy-pasting.
15 years ago
2dabb4e55f
Add the svn:eol-style property onto new files which where missing it to ensure uniform line endings.
15 years ago
efbedcfa54
Document Bluetooth files with overall file Doxygen comments. Add more initial RFCOMM layer code to receive and respond to SABM packets.
15 years ago
6d53cdba83
More documentation fixes.
15 years ago
fc92f9969c
Minor documentation cleanups.
15 years ago
9293de2491
Start implementation of RFCOMM decoding layer. Add new service initialize routines for each Bluetooth service - currently unused, but will eventually reset the service state of RFCOMM when a new connection is made.
15 years ago
13d812a718
Delay needed in bluetooth code due to the send function not waiting for the pipe bank to become ready before writing. Add in a call to Pipe_WaitUntilReady() to fix the issue.
15 years ago
a405a9bdf8
Extra protocol value in the RFCOMM protocol is the channel number, not the PSM - update typedef name and size.
...
Add delay to the Connection Request signal processing routine - without this, the host will not create the RFCOMM channel correctly. Need to investigate why this delay is needed.
15 years ago
480da5aab6
Add PSM value to the RFCOMM service so that the host knows what PSM to use on channels when trying to access it.
15 years ago
008e0e2e0a
Add start of RFCOMM service layer to the incomplete BluetoothHost demo.
...
Reduce the size of the attribute search list from 15 ranges to 8 to save RAM.
15 years ago
23a94a7181
Fix byte ordering of UUIDs in the SDP server - host can now successfully pair to the Bluetooth device and discover the exposed Serial Port Profile RFCOMM service.
15 years ago
c362709a1e
The SDP UUID lists should be searched and ALL UUIDs matched for a record to be retrieved, not partial matches. Change the SDP code so that the entire list must be matched against a service attribute table's contents before it is returned.
...
Change matching algorithm so that it recursively searches through the entire attribute table, and not just pre-specified sequence attributes.
Add browse lists and proper descriptions to the Serial Port service.
15 years ago
da51c1f974
Add L2CAP service attribute table. Fix up ProtocolDescriptorList attributes, and add macros for used UUIDs to reduce typing and make the code easier to read.
15 years ago
b98158bd50
Clean up the Service tables, add incomplete ProtocolDescriptorList attribute to the SDP service.
15 years ago
32ab52a298
Remove incorrect Language ID offset attribute from the SDP server - client assumes 0x0100 offset for primary language anyway, and the format of the offset was incorrect anyway.
15 years ago
Dean Camera