Moved the USB device selection logic for ENDPOINT_TOTAL_ENDPOINTS further up in Endpoint.h to where the endpoint bank capabilities are determined, to reduce the total number of device-specific logic.
Change USB_Host_WaitMS() to test and disable the HSOFI interrupt before resuming the bus, so that it does not fire before the delay loop has run.
Add missing const qualifier to the parameter of USB_Host_ClearPipeStall().
Minor documentation fixes.
Fix broken USB host mode due to the USB frame counter not being updated during the early enumeration steps, causing USB_Host_DelayMS() to spinloop forever.
Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application handling of USB Start of Frame events while in USB Host mode.
Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible to free up the Start of Frame flag for interrupt use in the user application.
Removed the internal endpoint and pipe memory allocation macros, as this is already performed directly in the code. Simplify the endpoint and pipe reset procedure.
Add new manual pages detailing the advantages of LUFA over the official Atmel USB AVR stack, and reasons why LUFA should be used over a built-from-scratch USB stack.
Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.
Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.
Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.
Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.
Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.
Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
Added new USB_Host_GetDeviceDescriptor() convenience function to retrieve the attached device's Device descriptor.
Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is cleared to prevent endpoint type corruption.
Fix documentation mentioning Pipe_GetCurrentToken() function when real name is Pipe_GetPipeToken().
Removed scheduler and memory allocation libraries.
Added new EVENT_USB_StartOfFrame event in the library to indicate the start of each USB frame (when generated).
Removed Tx interrupt from the USBtoSerial demo; now sends characters via polling to ensure more time for the Rx interrupt.
Fixed incorrect ENDPOINT_EPNUM_MASK mask preventing endpoints above EP3 from being selected (thanks to Jonathan Oakley).
Removed STREAM_CALLBACK() macro - callbacks now use regular function definitions to clarify user code.
Removed DESCRIPTOR_COMPARATOR() macro - comparators should now use regular function definitions to clarify user code.
Removed Endpoint_ClearCurrentBank() and Pipe_ClearCurrentBank() in favour of new Endpoint_ClearIN(), Endpoint_ClearOUT(), Endpoint_ClearControlIN(), Endpoint_ClearControlOUT(), Pipe_ClearIN(), Pipe_ClearOUT(), Pipe_ClearControlIN() and Pipe_ClearControlOUT() macros (done to allow for the detection of packets of zero length).
Renamed *_ReadWriteAllowed() macros to *_IsReadWriteAllowed() to remain consistent with the rest of the LUFA API.
Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived(), Endpoint_ClearSetupReceived() macro has been renamed to Endpoint_ClearControlSETUP(), the Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent() and the Pipe_ClearSetupSent() macro is no longer applicable and should be removed - changes made to compliment the new endpoint and pipe bank management API.
Updated all demos, bootloaders and projects to use the new endpoint and pipe management APIs (thanks to Roman Thiel).
Updated library doxygen documentation, added groups, changed documentation macro functions to real functions for clarity.
Removed old endpoint and pipe aliased read/write/discard routines which did not have an explicit endian specifier for clarity.
Removed the ButtLoadTag.h header file, as no one used for its intended purpose anyway.
Dean Camera