3a03da9705
Fixed ISR definition conflict in the XPLAIN bridge between the software UART and the AVRISP-MKII ISP modules.
15 years ago
158afe9109
Reverted Endpoint/Pipe non-sequential configuration hack, placed restriction on the configuration order instead to ensure maximum reliability.
...
Altered all low level device and host mode demos to ensure that endpoints and pipes are configured in ascending order properly.
Rewrote all low level host mode demos' configuration descriptor parser code to ensure that pipes are enumerated in ascending order, and to ensure maximum compatibility with devices.
Incremented all device mode demo's device descriptor revision numbers to ensure that any descriptor changes are re-fetched on machines which have enumerated previous versions.
15 years ago
713670043a
Move out many of the common class driver constants into grouped enums, to make them more managable.
...
Add new CDC descriptor structs to the CDC class driver, so that the CDC demos can use human readable field names.
Rename prefix for Still Image Host class driver functions from "SImage_" to "SI_" to remain consistent with the rest of the driver.
15 years ago
800485bd95
Remove dfu-programmer program switches, to ensure maximum compatibility with all dfu-programmer versions.
15 years ago
bd85422d2b
Added the --suppress-bootloader-mem option to the makefile dfu target, to ensure that writes to the bootloader section of the AVR's flash memory are ignored (thanks to Axel Rohde).
...
Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target.
Makefile whitespace fixes.
15 years ago
6d2f091cec
Make project makefiles correctly clean intermeditary build files from assembly and C++ sources (thanks to Daniel Czigany).
15 years ago
b3c6599bb7
Remove remaining void* descriptor casts in the projects and demos that were not removed when the GetDescriptor callback function's signature was altered.
15 years ago
263178fbb6
Add better description of the Ultra-Lightweight Ring Buffer header files.
15 years ago
092f82e06f
Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove the need for extra casting inside the callback (thanks to Jonathan Kollasch).
15 years ago
508e905d8d
Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing with basic code.
...
Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints.
15 years ago
5f3a1b2629
Fix invocations of avr-size in all makefiles broken on unpatched *nix systems, due to the recent update to the latest WinAVR makefile template.
15 years ago
48c5cdced4
Hide the PROGMEM attribute from Doxygen, as it appears to confuse the parser in some situations.
15 years ago
ff09cf9c73
Fix XPLAINBridge project discarding characters from the USB interface due to a double read from the endpoint.
...
Make XPLAINBridge and USBtoSerial projects more reliable by forcing a flush if the UART-to-USB buffer becomes nearly full.
Reduce locking in the LightweightRingBuffer.h header files by only locking on the update of the buffer count, and require insertions and removals from each buffer to occur in only one execution thread.
Fix CDC_*_ReceiveByte() returning 0 when the interface is not configured, instead of the new -1 error value.
Fix CDC_Host_ReceiveByte() not re-freezing the pipe if no packet has been received.
Remove redundant Pipe token set commands in the CDC and RNDIS host class drivers.
15 years ago
9597b33c33
Fixed Serial peripheral driver not turning off the USART before reconfiguring it, which would cause incorrect operation to occur (thanks to Bob Paddock).
15 years ago
0f45b9c8e0
More spell checking of all source files -- correct missed errors, switch to EN-GB spelling dictionary.
15 years ago
24e621a8d8
Altered the CDC Deivice and Host Class drivers' receive byte routines, so that no data is indicated by a negative return value.
...
Added auto flushing of OUT data to the CDC Host Class driver's USBTask function to automatically flush the send pipe buffer.
15 years ago
28401f7bb7
Spell check all source files once again to find any typos.
15 years ago
6bda628718
Update all demos, projects and bootloaders to indent all function parameters, one per line, for better readability.
...
Add missing const qualifiers to the demos.
16 years ago
6b5e684c77
Update makefiles to use the latest WinAVR/Atmel toolchain makefile template.
...
Add new module source variables to the library core makefile, so that module sources can be added to a project's makefile on a per-module rather than per-file basis.
16 years ago
42ac34b484
Change over all makefiles to use C99 standards mode, rather than C99 + GNU Extensions.
16 years ago
9299735c75
Disable strict aliasing explicitly in the project makefiles, as this is apparently enabled by default in newer AVR-GCC builds, and aliasing is used heavily for type-punning through the LUFA and third party library's codebase.
16 years ago
f4710f6f86
Removed the automated checking of event names in the demo, project and bootloader makefiles due to inconsistancies between the behaviour of the command line tools used to perform the check on each platform.
...
Removed the internal endpoint and pipe memory allocation macros, as this is already performed directly in the code. Simplify the endpoint and pipe reset procedure.
16 years ago
dfe50ff349
Added ability to set the serial baud rate via the user's terminal in the XPLAINBridge project.
16 years ago
e2e1fe5aad
Fixed possible buffer overrun in the XPLAINBridge project when in serial bridge mode.
16 years ago
d83cc9ac80
Change AVRISP-MKII and XPLAINBridge descriptors to indicate that the device is bus-powered only. Add compile time options to reduce the compiled size of the firmware.
16 years ago
3904c1a606
Add remaining AVRStudio project files to the library projects.
16 years ago
ae9dab1398
Add missing clean_doxygen phony targets to the project makefiles.
16 years ago
8de31cbb78
Reduce prescaler of the flush timer in the USBtoSerial demo, so that buffer overruns will not occur regardless of hardware and baud rate settings.
16 years ago
0bcc82ac28
Alter the ring buffer library headers to have both atomic and non-atomic insertion/removal routines. Modify the existing projects so that buffer operations performed in an ISR use the shorted non-atomic versions, as they are already performed in a blocking ISR.
...
Alter USBtoSerial demo so that it does not enter a blocking loop to send data from the USB to the USART, as this can cause dropped bytes in the reception code if large amounts of data are sent in both directions at the same time. Added a flush timer to the USBtoSerial code for the USART to USB interface, so that multiple bytes can be sent in the same USB packet.
16 years ago
3fd246041b
Add glitch protection to the software UART in the XPLAINBridge project code, so that very short glitches on the RX line don't cause a frame reception to occur.
16 years ago
229935184b
Major changes to the XPLAINBridge software UART code for performance and reliability. New code reduces the number of missed characters and misread characters.
16 years ago
8b053d6ba5
Added new Drivers/USB/LowLevel/Device.c file to house Device mode specific functions that are more complicated than simple macros. Moved USB_Device_SendRemoteWakeup() to the new Device.c source file and corrected it to unfreeze and restart the USB controller clock before issuing a Remote Wakeup request.
...
Removed the USB_Device_IsRemoteWakeupSent() and USB_Device_IsUSBSuspended() macros, as they are now obsolete.
16 years ago
55d7e1e65b
Make XPLAINBridge serial bridge much more reliable for the reception of characters from the XMEGA through the software UART interface.
16 years ago
ad29e79b94
Maximise the size of the ring buffers in the Benito/XPLAINBridge/USBtoSerial projects, so that they should never become full under normal conditions.
16 years ago
988604b25d
Moved calls to V2Params_UpdateParamValues() out of the main AVRISP-MKII and XPLAINBridge project loops and into the AVRISP management function.
16 years ago
711542ee89
Spell check code and manual pages. Remove custom Doxygen CSS stylesheet, as the new 1.7 Doxygen's default stylesheet is much better.
16 years ago
d57e7369a2
Oops - temp code left in the XPLAINBridge project which prevented it from entering programmer mode.
16 years ago
036a156ff4
Slight improvements to the reliability of the software UART in the XPLAINBridge project.
16 years ago
5fa0e9c007
Oops - light weight ring buffer documentation used \ref instead of \param to document function parameters.
16 years ago
b02217d745
Add missing documentation to the lightweight ring buffer code in the XPLAINBridge project.
16 years ago
fc92f9969c
Minor documentation cleanups.
16 years ago
3b95b8dedc
Added new VTARGET_REF_VOLTS and VTARGET_SCALE_FACTOR compile time defines to the AVRISP-MKII programmer project to set the VTARGET reference voltage and scale factor.
...
Fixed XPLAINBridge project not correctly reading the XMEGA's supply voltage when reporting back to the host.
16 years ago
8d993afc53
Replace ring buffer library in Benito and USBtoSerial projects with the new lightweight ring buffer header to improve reliability.
16 years ago
bb9fb1051c
Add better documentation to the Software UART code in the XPLAINBridge project.
16 years ago
1c407b9669
Switch software UART over to timer 1 and remove timer prescaling to try to prevent integer rounding errors and thus minimize the possible error of the UART code.
16 years ago
f64e3db07a
Rename software USART driver globals to make the code more in line with the rest of the XPLAINBridge project.
16 years ago
79742c5d24
Make software USART used in the XPLAINBridge project directly check and store into the ring buffers, rather than polling from the main program loop to avoid added latency.
16 years ago
9b29d1dc50
Create a new LightweightRingBuffer.h header file for the XPLAIN project to abstract out the new ring buffer without a performance penalty.
16 years ago
9c037a952f
The RingBuff library code has been replaced in the XPLAINBridge project with an ultra lightweight buffer to help improve the reliability of the bridge.
16 years ago
776485a6c5
Remove obsolete entry from the Doxygen configuration files.
16 years ago
Dean Camera