7c8d16fd7a
Oops - need to turn off USART via control register B before reconfiguring, fix ordering of USART control register modifications in the Benito and USBtoSerial projects.
14 years ago
28401f7bb7
Spell check all source files once again to find any typos.
14 years ago
ca007f91f2
Fixed Benito and USBtoSerial projects not turning off the USART before reconfiguring it, which could cause incorrect operation to occur (thanks to Bob Paddock).
14 years ago
6bda628718
Update all demos, projects and bootloaders to indent all function parameters, one per line, for better readability.
...
Add missing const qualifiers to the demos.
15 years ago
6b5e684c77
Update makefiles to use the latest WinAVR/Atmel toolchain makefile template.
...
Add new module source variables to the library core makefile, so that module sources can be added to a project's makefile on a per-module rather than per-file basis.
15 years ago
42ac34b484
Change over all makefiles to use C99 standards mode, rather than C99 + GNU Extensions.
15 years ago
9299735c75
Disable strict aliasing explicitly in the project makefiles, as this is apparently enabled by default in newer AVR-GCC builds, and aliasing is used heavily for type-punning through the LUFA and third party library's codebase.
15 years ago
f4710f6f86
Removed the automated checking of event names in the demo, project and bootloader makefiles due to inconsistancies between the behaviour of the command line tools used to perform the check on each platform.
...
Removed the internal endpoint and pipe memory allocation macros, as this is already performed directly in the code. Simplify the endpoint and pipe reset procedure.
15 years ago
dfe50ff349
Added ability to set the serial baud rate via the user's terminal in the XPLAINBridge project.
15 years ago
e2e1fe5aad
Fixed possible buffer overrun in the XPLAINBridge project when in serial bridge mode.
15 years ago
3904c1a606
Add remaining AVRStudio project files to the library projects.
15 years ago
ae9dab1398
Add missing clean_doxygen phony targets to the project makefiles.
15 years ago
8de31cbb78
Reduce prescaler of the flush timer in the USBtoSerial demo, so that buffer overruns will not occur regardless of hardware and baud rate settings.
15 years ago
0bcc82ac28
Alter the ring buffer library headers to have both atomic and non-atomic insertion/removal routines. Modify the existing projects so that buffer operations performed in an ISR use the shorted non-atomic versions, as they are already performed in a blocking ISR.
...
Alter USBtoSerial demo so that it does not enter a blocking loop to send data from the USB to the USART, as this can cause dropped bytes in the reception code if large amounts of data are sent in both directions at the same time. Added a flush timer to the USBtoSerial code for the USART to USB interface, so that multiple bytes can be sent in the same USB packet.
15 years ago
8b053d6ba5
Added new Drivers/USB/LowLevel/Device.c file to house Device mode specific functions that are more complicated than simple macros. Moved USB_Device_SendRemoteWakeup() to the new Device.c source file and corrected it to unfreeze and restart the USB controller clock before issuing a Remote Wakeup request.
...
Removed the USB_Device_IsRemoteWakeupSent() and USB_Device_IsUSBSuspended() macros, as they are now obsolete.
15 years ago
ad29e79b94
Maximise the size of the ring buffers in the Benito/XPLAINBridge/USBtoSerial projects, so that they should never become full under normal conditions.
15 years ago
5fa0e9c007
Oops - light weight ring buffer documentation used \ref instead of \param to document function parameters.
15 years ago
c2e340320c
Document lightweight ring buffer header files.
15 years ago
2dabb4e55f
Add the svn:eol-style property onto new files which where missing it to ensure uniform line endings.
15 years ago
8d993afc53
Replace ring buffer library in Benito and USBtoSerial projects with the new lightweight ring buffer header to improve reliability.
15 years ago
776485a6c5
Remove obsolete entry from the Doxygen configuration files.
15 years ago
a883cf65dc
Renamed CDC device class demos' ManagementEndpoint descriptor to NotificationEndpoint to more accurately indicate its purpose.
15 years ago
071e02c6b6
Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.
15 years ago
e331b531c6
Change over instances of "make" in the makefiles to "$(MAKE)" to allow for the make tool to be overridden.
15 years ago
9c8bd6ed9b
Remove incorrect Abstract Call Management class specific descriptor from the CDC demos, bootloaders and projects.
15 years ago
3d28d53c3e
Change AVRISP project's timeout to be interrupt based again, but make the interrupt itself interruptable and use a seperate assembly file to hand-optimize the ISR code.
...
Removed the cast to uint16_t on the set baud rate in the USBtoSerial project, so that the higher >1M baud rates can be selected (thanks to Steffan).
15 years ago
e977774d4e
Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent.
15 years ago
59c4871f80
USB_Init() no longer calls sei() to enable global interrupts - this must now be done in the user application once all init code has run.
15 years ago
49b09a2042
Standardized the naming scheme given to configuration descriptor sub-elements in the Device mode demos, bootloaders and projects.
...
Fix errors in the MouseHostWithParser demo from incorrect use of the HID_ALIGN_DATA() macro.
15 years ago
7d51e51c79
Increased throughput of the USBtoSerial demo on systems that send multiple bytes per packet (thanks to Opendous Inc.).
15 years ago
15f84bb8f5
New BOARD value option BOARD_NONE (equivelent to not specifying BOARD) which will remove all board hardware drivers which do not adversely affect the code operation (currently only the LEDs driver).
...
Spell-check code/comments in the Webserver/AVRISP-MKII projects.
15 years ago
77e86e7d82
Exlude the "INCLUDE_FROM_*" macros from the individual project's documentation.
15 years ago
254a0c1ae8
Update driver INF files - change manufacturer name from the original template's name to the Four Walled Cubicle website.
15 years ago
db420853ce
Add Webserver project Doxygen configuration file and overview document.
...
Fix Doxygen configuration files' input file exclusion filters.
15 years ago
efb6c35778
Update Doxygen configuration files to the latest Doxygen version.
15 years ago
7f9f97c792
Update copyright year to 2010.
15 years ago
d4ca7fb44c
Fix MIT license language to make its intent clearer.
15 years ago
b408a5fe62
Add const qualifier to the parameters of Projects' functions where possible.
15 years ago
c3758ac5ef
Un-inline the SendAddress function in NVMTarget.c/.h of the AVRISP project.
...
Add new HotmailNotifier project, which changes a LED's colour based on the user's unread email count as sent from Windows Live Messenger.
15 years ago
4f74075fad
Speed up bit-banged USART code in the AVRISP project.
...
Fix project text files to refer to "project" instead of "demo".
15 years ago
c05c7c7df4
Added new XPLAIN serial Bridge project (thanks to John Steggall for the software UART code).
15 years ago
d6edfe35c8
Spell check all source code variables, comments and strings.
15 years ago
f29fc1abc4
Add double banking property to LUFA powered projects in the Projects directory. Add guards to macro parameters to ensure that formulas passed as parameters don't mess up the internal macro structure.
15 years ago
9ea891ea20
Use clearer buffer names in the USBtoSerial project to prevent confusion.
15 years ago
de70f0f1cf
Moved USBtoSerial demo the Projects directory, as it is simply an expanded CDC demo. Added const qualifier to Endpoint/Pipe stream write routines.
15 years ago
Dean Camera