1babe52682
Oops - fix path case in the Webserver project makefile, to fix *nix builds.
15 years ago
d11ed10c53
Add FatFS library to the Webserver project, extend the HTTP server so that it now serves files from the Dataflash. Add Mass Storage device mode class driver so that files can be loaded to the board Dataflash when inserted into a PC.
15 years ago
a960e4b3b2
Add DHCP server to the Webserver demo for automatic network configuration. Correct uIP timer clock not tracking the correct timespan.
15 years ago
eb99b1ec90
Exclude host application directories from the Doxygen input source file directories.
15 years ago
4bd44139b1
Move TWI.c driver into the straight LUFA/Drivers/Peripheral/ directory.
...
Fix TemperatureDataLogger and Webserver project builds.
15 years ago
db420853ce
Add Webserver project Doxygen configuration file and overview document.
...
Fix Doxygen configuration files' input file exclusion filters.
15 years ago
857381185d
ADC2 and ADC3 channels do not exist on the U4 series USB AVRs.
15 years ago
dd995683ea
Enhance TemperatureDatalogger project -- add RTC capabilities so that data is logged along with the current time and date. Make logging interval configurable, set by a C# PC host application.
15 years ago
03ee87b35a
Fix up the incomplete Webserver project so that it integrates with the uIP stack correctly. Add simple HTTP webserver as a placeholder until FatFS can be integrated.
...
Begin to look into the RNDIS Host Class Driver, which seems to crash on test hardware after many packets have been received.
15 years ago
1d2bc47eba
Clean up of the altered XPLAINBridge project.
15 years ago
60fd0ff418
Changed XPLAINBridge project to be both a USB to USART bridge and a PDI programmer, based on the state of a mode select pin.
15 years ago
2746154652
Added master mode hardware TWI driver.
...
Fixed a bug in the incomplete Webserver project, where the packet data was not being written to and read from the correct buffer address.
15 years ago
f0d6d4ef13
Started Webserver RNDIS host project.
15 years ago
208edeee0f
Add new TemperatureDataLogger project, a simple USB Mass Storage class Temperature Data Logger using the onboard Dataflash and Temperature sensor.
15 years ago
8301dc553e
Fix references to the renamed AVRISP-MKII project folder.
15 years ago
65fcebf478
Complete combining of PDI and TPI target communication code files, stub out TINY NVM controller functions.
15 years ago
05fcf7e2a7
Rename PDIProtocol.c/.h to XPROGProtocol.c/.h as it will now handle both TPI and PDI programming.
15 years ago
ce044844ea
Combine AVRISP project TPI and PDI lib directories - these protocols use the same underlying XPROG wrapper for the host-to-programmer command wrapping.
15 years ago
26bc1f3cfd
Correct include paths and makefile for the AVRISP project now that the protocol handlers are in seperate directories.
15 years ago
bd5e8f07b7
Stub out more of the TPI programming protocol routines in the AVRISP project.
15 years ago
be71f934a4
Seperate out XMEGA and TINY NVM routines into seperate files.
15 years ago
cda88cf97c
Start of implementation of the low level TPI programming protocol in the AVRISP project.
15 years ago
b408a5fe62
Add const qualifier to the parameters of Projects' functions where possible.
15 years ago
901e26edd8
Add LEDNotifier project to the Projects folder build list. Add new LEDMixer C# host application for the LEDNotifier project.
15 years ago
12abb59b19
Fix up references in the LEDNotifier project to the old HotmailNotifier name.
15 years ago
47384e3c50
Rename HotmailNotifier project files to LEDNotifier.
15 years ago
3b3ea167f0
Renamed HotmailNotifier project to LEDNotifier.
15 years ago
3d6508c9b9
Enhance the HotmailNotifier project so that the LEDs' individual brightness can be controlled individually via software PWM.
15 years ago
c3758ac5ef
Un-inline the SendAddress function in NVMTarget.c/.h of the AVRISP project.
...
Add new HotmailNotifier project, which changes a LED's colour based on the user's unread email count as sent from Windows Live Messenger.
15 years ago
1fa27139f5
Split out NVM access code in the AVRISP project into a seperate NVMTarget.c source file and header. Make NVM register accesses use the NVM base address as set by the host, rather than using the fixed value from the XMEGA datasheet.
15 years ago
307ba254d5
The AVRISP project can now enter PDI mode under both bit-bang and hardware USART connection modes, tested against the XPLAIN board hardware. Still need to complete higher level NVM access code so that the device's memories can be read and written.
15 years ago
cf22a744ec
Additional file renames and modifications to change CDC demos to VirtualSerial.
15 years ago
478d9dc04f
Added support for the Atmel EVK527 board hardware.
15 years ago
bae00a3d42
Added support for the Dataflash mounted on the XPLAIN board. Added new XPLAIN_REV1 board target for the first revision XPLAIN board, which used a different (smaller) Dataflash IC to later revisions.
15 years ago
f69f03cb0d
Started implementing the low level PDI protocol in the AVRISP project, for XMEGA device programming.
15 years ago
f92b56191d
Add new more reliable software UART for the XPLAINBridge project by David Prentice and Peter Danneger.
15 years ago
fec31947a6
Removed John Steggall's software UART code from the XPLAIN Bridge project due to reliability issues.
15 years ago
1f8dfd0205
Add support for unwrapping of the XMEGA PDI programming protocol to the AVRISP Programmer project.
15 years ago
5930f47bf4
Rename V2ProtocolTarget files to ISPTarget in the AVRISP Programmer Clone project.
15 years ago
5aa2b26261
Added new RNDIS Host class driver and the beginnings of a RNDISEthernetHost Class Driver demo.
...
Fixed all Class drivers to ensure they have appropriate guards on each function to ensure the device is enumerated before running, fixed error codes on all guards to return "DeviceDisconnected" where possble.
Renamed HOST_SENDCONTROL_DeviceDisconnect enum value to HOST_SENDCONTROL_DeviceDisconnected to be in line with the rest of the library enum error codes.
15 years ago
f37d21bbe9
Updated John Steggall's software USART in the XPLAINBridge project.
15 years ago
50f4a3b625
Fix build and Doxygen errors.
15 years ago
8c6c27d88b
Added new RNDISHost Host LowLevel demo. Fixed misnamed Pipe_SetPipeToken() macro for setting a pipe's direction. Fixed CDCHost failing on devices with bidirectional endpoints.
15 years ago
c05c7c7df4
Added new XPLAIN serial Bridge project (thanks to John Steggall for the software UART code).
15 years ago
aaa0bed556
The incomplete StandaloneProgrammer project now uses Host and Device Mass storage classes, so that program data can either be loaded onto the device's Dataflash storage, or read off an attached USB memory stick.
...
The USB target family and allowable USB mode tokens are now public and documented (USB_CAN_BE_*, USB_SERIES_*_AVR).
The SCSI_Request_Sense_Response_t and SCSI_Inquiry_Response_t type defines are now part of the Mass Storage Class driver common defines, rather than being defined in the Host mode Class driver section only.
The USB_MODE_HOST token is now defined even when host mode is not available.
Added missing CDC_Host_CreateBlockingStream() function code to the CDC Host Class driver.
15 years ago
9b20114555
Make RNDISHost demo validate the set Packet Filter to ensure that it is being sent correctly.
...
Add new (incomplete) StandaloneProgrammer project, using the ELM Petite FAT library to read files stored on the board's dataflash by the host.
15 years ago
6a46f0025a
Add beginnings of a RNDIS Ethernet Host demo.
15 years ago
8ba51f090f
Added new Printer Host mode Class driver.
...
Added new Printer Host mode ClassDriver demo.
Added table of supported classes and modes to the main USB Class Driver documentation.
15 years ago
87b2572ae5
Added new JoystickHostWithParser demos to the library.
...
Add some missing documentation to some of the library demos.
15 years ago
0899deaae3
Add new CDCMouse ClassDriver device demo, combining a CDC Virtual Serial Port and a HID Mouse.
15 years ago
Dean Camera