b71ff7c8cd
Added new EVENT_USB_Device_StartOfFrame() event, controlled by the new USB_Device_EnableSOFEvents() and USB_Device_DisableSOFEvents() macros to give bus-synchronised millisecond interrupts when in USB device mode.
15 years ago
25ddbb9e3b
Adjust endpoint polling intervals for HID demos, to make them compliant with the 10ms minimum polling period for Low Speed devices.
15 years ago
99abd1a8b7
Added explicit attribute masks to the device mode demos' descriptors.
15 years ago
85c2716f2d
Make Benito ping-pong LED code more explicit, using masks of the TX and RX LED masks for ping-pong toggle rather than the ambiguous LED "Busy" mask.
...
Fix incorrect event name in MassStorageHost.c.
15 years ago
3848482532
Add Benito board LED driver to the Benito Programmer project.
15 years ago
99c447c754
Fixed issue in USBtoSerial demos where the USART Rx line was not having its pullup enabled at startup, leading to noise being received from the Rx pin when left floating.
...
Removed unused relative Common.h header include from the DriverStubs board stub drivers.
Fixed Benito programmer, use the correct LED functions where needed to ensure correct status display at all times.
15 years ago
c5038f1bf4
Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.
...
Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.
Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.
15 years ago
6f4cc344ab
Rename TOTAL_NUM_CONFIGURATIONS to FIXED_NUM_CONFIGURATIONS, to match the existing FIXED_CONTROL_ENDPOINT_SIZE compile time option. Add FIXED_NUM_CONFIGURATIONS to the descriptors of each project using the option.
15 years ago
eb41086947
Fix demos based on the device mode HID class driver, as well as the driver itself. Changed HID device class driver to require the user to give a buffer and size to hold the previously generated report, for comparison purposes, and altered the prototype of the CALLBACK_HID_Device_CreateHIDReport() function so that reports can be sent to the host even if there are no apparent changes (useful for relative movements in mice, etc.).
15 years ago
7df6b9563c
Add new HID_Device_MillisecondElapsed() function to the HID device Class driver, to move the burden of managing the Idle period of each instance to the library and not the user application.
16 years ago
72932e2780
Fix to HID device mode Class driver, so that new reports are compared against the old, and updated reports made within the idle period are sent immediately to the host.
16 years ago
6928f17b64
Extend the automatic serial number descriptor code to read out and send all 10 bytes (20 characters) of the internal serial number on supported AVRs, rather than just the first 6 bytes (12 characters).
16 years ago
3472af91a5
Change project makefiles so that the current target settings and not just the board selection is printed during the build process.
...
Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.
16 years ago
61ff4824a9
Changed AudioOutput demos to explicitly use timer 3 - the smaller USB AVRs where timer 1 was needed instead did not have the endpoint size neccesary for good audio throughput anyway.
...
Fix Benito documentation indicating erronously that the project used the HID USB class instead of the CDC class.
16 years ago
864196c884
State information for class drivers is now zeroed out during enumeration (both in device and host mode) to ensure sane values after each enumeration. User code should no longer explicitly set state information as this is no longer preserved.
16 years ago
200821fe82
Added new LEDs_ToggleLEDs() function to the Board LEDs driver.
16 years ago
3991c94b38
Ensure new Benito Programmer project matches Don's established LED behaviour - flash LED while generating target /RESET pulse, ping-pong LEDs during enumeration.
16 years ago
2a0c28e6e4
Minor updates to the Benito programmer - remove redundant PORT register manipulations.
16 years ago
06f3a6a876
Tweaks to the new Benito Programmer project for documentation and port/pin usage.
16 years ago
a6e85d6ed8
Added new Benito project, a simple modified USB-to-Serial bridge for the programming of AVRs using the official Arduino bootloader.
16 years ago
e071f3897a
Added new USB_DeviceState variable to keep track of the current Device mode USB state.
...
Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.
Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.
Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.
Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
16 years ago
4f747e7b76
Change Doxygen configuration files to not produce 4096 directories for the documentation files -- the LUFA components do not generate enough documentation files to justify the large performance hit of creating so many directories.
...
Fix missing Doxygen documentation in the Class Driver Mass Storage Device demo.
16 years ago
b243c2b80b
Magstripe Project: Ensure that empty tracks still print out a newline seperator so that the host always knows what track data is being sent.
...
Updates to PrinterHost demo to include some PCL test data plus fixes to the GetDeviceID routine.
16 years ago
d6543dee0d
Minor updates to the Magstripe and MissileLauncher projects to fix bugs and improve performance.
...
Fixed error in GenericHID descriptors preventing it from passing the USB-IF HID tests (thanks to Søren Greiner).
16 years ago
37f8a84f35
Added new TOTAL_NUM_CONFIGURATIONS option, removed USE_SINGLE_DEVICE_CONFIGURATION compile time option (but silently convert it to USE_SINGLE_DEVICE_CONFIGURATION internally for compatibility).
...
Added new USE_FLASH_DESCRIPTORS compile time option. By default, descriptors can now lie in mixed memory spaces (specified by a new parameter to the CALLBACK_USB_GetDescriptor() function) unless one of the USE_*_DESCRIPTORS compile time option is specified.
16 years ago
1d26e78258
Added compatibility list to the documentation of each individual demo.
...
Documented FAST_STREAM_TRANSFERS compile time option.
Reduced the TCP window size for the RNDIS demos (Class and LowLevel) to make them compatible with the AT90USB64x.
16 years ago
0fcbe22c9e
Added new HOST_STATE_WaitForDeviceRemoval host state machine state for non-blocking disabling of device communications until the device has been removed (for use when an error occurs or communications with the device have completed). Changed over all host mode demos to use the new state.
...
Added verbose documentation for each of the USB Host state machine states.
16 years ago
e0af6014a7
Added incomplete PrinterHost demo application.
...
Seperated out Lib components of the incomplete BluetoothHost demo application out into a seperate Lib subfolder.
Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case.
16 years ago
b462f2d457
Minor correction to MagStripe demo to fix build problems.
16 years ago
f1076ac4d6
Added const modifiers to device mode class drivers.
...
Added parameter directions to function parameter documentation.
Added new experimental FAST_STREAM_FUNCTIONS compile time option to speed up stream transfers at the expense of a higher FLASH consumption (needs testing to verify improved throughput).
16 years ago
3cbdcd3686
Reduce struct name pollution - group typedef struct names by class driver name where appropriate.
16 years ago
a3a04aa671
Pipe_ConfigurePipe() now automatically defaults IN pipes to accepting infinite IN requests, this can still be changed by calling the existing \ref Pipe_SetFiniteINRequests() function.
16 years ago
feabfd12ce
Fix makefiles -- the auto-addition of -D switches to each LUFA compile time option was faulty, due to GNUMake becomming confused by the spaces in the USE_STATIC_OPTIONS lines. Make user add in the switches explicitly instead.
16 years ago
beb0b2bda0
Move LUFA compile time options to a new section in the application makefiles for clarity.
16 years ago
dfa547164a
Extend USB_GetDeviceConfigDescriptor() routine to require the configuration number within the device to fetch, to add support for multi-configuration devices.
16 years ago
8bc3a91c1f
Fix broken MagStripe project.
16 years ago
d475ea4394
Oops - restore deleted MissileLauncher project, fix all spelling errors for "missile". TODO: Learn how to actually spell.
16 years ago
f896c00c48
Break device mode class driver interfaces into seperate config and state structs which are then combined, for clarity. Move device mode class driver interfaces back into the device mode class driver headers from the common class headers to make room for host class interfaces.
16 years ago
2b21a1552d
Remove hardcoded DOT path from all Doxygen config files.
...
Better documentation for the MissleLauncher project - add credit to PyLauncher project.
16 years ago
f33b282009
Add MissleLauncher project to the /Projects/ makefile. Add missing MissleLauncher Doxygen.conf file.
16 years ago
dcf303762a
Pipe_GetErrorFlags() now returns additional error flags for overflow and underflow errors.
...
Change MIDI demos to use real MIDI command values, and shift for the USB wrapper, rather than shift for the MIDI bytes. This is a little confusing for the MIDI USB wrapper, but allows for the use of real standardized MIDI command values.
16 years ago
39d07c3da0
Added USB Missle Launcher project, submitted by Dave Fletcher.
16 years ago
c75f8bf223
More Doxygen fixes - ensure no undocumented function parameters.
16 years ago
afe6ae1402
Add host mode USB Class driver stubs, add beginnings of a CDC host class driver.
...
Split out common defines/types from class drivers into a seperate common class driver directory.
Make central USB Class driver dispatch headers, used for both device and host modes.
16 years ago
dd2cc7eda7
Remove outdated AVRStudio project files from demos, projects, bootloaders. Fix makefiles of ClassDriver device demos.
16 years ago
3d1baa6f95
Added multiple Report ID support to the HID class driver. Removed OUT endpoint support from HID driver (all OUT reports are now processed through control requests) as a seperate endpoint had issues with determining the exact output report length.
16 years ago
a67bd74e3e
Minor documentation page updates.
...
Redocumented all device demos, now that they have changed over to the new USB class drivers.
Added C linkage to class drivers for C++ support.
Added prefixes to most of the class driver constants to prevent name clashes.
16 years ago
7c5444b89a
Removed new Start of Frame event from the library; performance suffered far too much and it was only useful in one of the standard classes (HID). Altered HID demos to use the previous method of tracking millisecond periods via a hardware timer rather than the SOF events.
...
Fixed MIDI class driver blocking on unread events to the host.
16 years ago
d1e5266036
Commit of new class abstraction APIs for all device demos other than the MIDI demo - not documented yet.
...
Removed scheduler and memory allocation libraries.
Added new EVENT_USB_StartOfFrame event in the library to indicate the start of each USB frame (when generated).
Removed Tx interrupt from the USBtoSerial demo; now sends characters via polling to ensure more time for the Rx interrupt.
16 years ago
b7ef7f49c9
Moved out each demos' functionality library files (e.g. Ring Buffer library) to /Lib directories for a better directory structure.
16 years ago
Dean Camera