qmk_firmware

Commit Graph

Author	SHA1	Message	Date
Dean Camera	f79f9abd28	Fixed compilation error in the AudioInput demos when MICROPHONE_BIASED_TO_HALF_RAIL is defined (thanks to C. Scott Ananian). Minor documentation cleanups. Make sure HID class driver uses properly cast pointers when writing to the report buffer.	15 years ago
Dean Camera	4e99625f7c	Change over MIDIToneGenerator to use only a single channel (MIDI channel 1) due to cycle constraints.	15 years ago
Dean Camera	c58c53dba9	Added incomplete MIDIToneGenerator project.	15 years ago
Dean Camera	49b09a2042	Standardized the naming scheme given to configuration descriptor sub-elements in the Device mode demos, bootloaders and projects. Fix errors in the MouseHostWithParser demo from incorrect use of the HID_ALIGN_DATA() macro.	15 years ago
Dean Camera	ce260ae786	Webserver project now uses the board LEDs to indicate the current IP configuration state. Don't double-read data from the attached disk in the incomplete StandaloneProgrammer project when in host mode.	15 years ago
Dean Camera	15f84bb8f5	New BOARD value option BOARD_NONE (equivelent to not specifying BOARD) which will remove all board hardware drivers which do not adversely affect the code operation (currently only the LEDs driver). Spell-check code/comments in the Webserver/AVRISP-MKII projects.	15 years ago
Dean Camera	53eca61d02	Minor fixups to the documentation and preprocessor tokens.	15 years ago
Dean Camera	15c408ab86	Moved initial completed version of the Webserver project out of the Projects/Incomplete directory.	15 years ago
Dean Camera	d66f227cce	Neaten Webserver project code.	15 years ago
Dean Camera	431db89b00	Fixed CDC and RNDIS host demos and class drivers - bidirectional endpoints should use two seperate pipes, not one half-duplex pipe.	15 years ago
Dean Camera	03ee87b35a	Fix up the incomplete Webserver project so that it integrates with the uIP stack correctly. Add simple HTTP webserver as a placeholder until FatFS can be integrated. Begin to look into the RNDIS Host Class Driver, which seems to crash on test hardware after many packets have been received.	15 years ago
Dean Camera	2746154652	Added master mode hardware TWI driver. Fixed a bug in the incomplete Webserver project, where the packet data was not being written to and read from the correct buffer address.	15 years ago
Dean Camera	77dda302ac	Fixed invalid USB controller PLL prescaler values for the ATMEGAxxU2 controllers Fixed lack of support for the ATMEGA32U2 in the DFU and CDC class bootloaders Changed incomplete Webserver project over to using the uIP timer library.	15 years ago
Dean Camera	f0d6d4ef13	Started Webserver RNDIS host project.	15 years ago
Dean Camera	6122ba93cf	Fix MassStorageKeyboard demo USE_INTERNAL_SERIAL check being performed before the required library headers were included, causing a compilation error. Added notes to the class driver functions indicating which functions require what Device/Host state machine states to function.	15 years ago
Dean Camera	7f9f97c792	Update copyright year to 2010.	15 years ago
Dean Camera	208edeee0f	Add new TemperatureDataLogger project, a simple USB Mass Storage class Temperature Data Logger using the onboard Dataflash and Temperature sensor.	15 years ago
Dean Camera	d4ca7fb44c	Fix MIT license language to make its intent clearer.	15 years ago
Dean Camera	7ace314cc1	Increase timeout of Mass Storage and Still Image host commands to 10 seconds (up from 5) to account for slow-processing devices. Added brace guards to macros with parameters to prevent unintended changed evaluation of the macro expression. Minor code cleanups (remove redundant comments, fix spacing, etc.).	15 years ago
Dean Camera	c05c7c7df4	Added new XPLAIN serial Bridge project (thanks to John Steggall for the software UART code).	15 years ago
Dean Camera	d3f11eb528	Make the StandaloneProgrammer project seamlessly read out drive contents from either an attached FAT formatted drive when in host mode, or the onboard FAT formatted dataflash when in device mode.	15 years ago
Dean Camera	702bec892d	Fixed misnamed SI_Host_USBTask() and SI_Host_ConfigurePipes() functions.	15 years ago
Dean Camera	aaa0bed556	The incomplete StandaloneProgrammer project now uses Host and Device Mass storage classes, so that program data can either be loaded onto the device's Dataflash storage, or read off an attached USB memory stick. The USB target family and allowable USB mode tokens are now public and documented (USB_CAN_BE_, USB_SERIES__AVR). The SCSI_Request_Sense_Response_t and SCSI_Inquiry_Response_t type defines are now part of the Mass Storage Class driver common defines, rather than being defined in the Host mode Class driver section only. The USB_MODE_HOST token is now defined even when host mode is not available. Added missing CDC_Host_CreateBlockingStream() function code to the CDC Host Class driver.	15 years ago
Dean Camera	7ef58eef7a	Fixed LowLevel Keyboard demo not saving the issued report only after it has been written to the endpoint. Added support for multiple keyboard keycodes in a single report to the LowLevel and ClassDriver Keyboard demos.	15 years ago
Dean Camera	9b20114555	Make RNDISHost demo validate the set Packet Filter to ensure that it is being sent correctly. Add new (incomplete) StandaloneProgrammer project, using the ELM Petite FAT library to read files stored on the board's dataflash by the host.	15 years ago
Dean Camera	271be037b7	Partial Commit: Move AVRISP project out of the Projects\Incomplete directory.	16 years ago
Dean Camera	8aee4cb2f2	Add function documentation to the AVRISP project.	16 years ago
Dean Camera	73801c73a1	Finished preliminary AVRISP project - all V2 protocol commands now work correctly for basic operations.	16 years ago
Dean Camera	4742e95a3f	Fixed AVRISP V2 Protocol handler for the READ_FLASH_ISP and READ_EEPROM_ISP handler - can now correctly read back device data. Programming command handler is still broken, although first page is written correctly to FLASH in paged write mode.	16 years ago
Dean Camera	6d1adf7339	Updated Benito project -- added hardware interrupt and software buffering for serial data reception to prevent missed characters, condensed pulse generation counters into a struct for clarity. Added check to CDC_Device_BytesReceived() to ensure 0 is returned when device is not enumerated to a host. Move AVRISP project's V2Protocol_DelayMS() function to be static inline, as it is now very minimal. Added extra project doxygen documentation.	16 years ago
Dean Camera	f070902bdb	Fix endianness of LOAD_ADDRESS command data, add correct PROGRAM_FLASH_ISP/PROGRAM_EEPROM_ISP polling and endpoint bank clearing, add hardware delays/timeouts to the V2 Protocol handler in the AVRISP project.	16 years ago
Dean Camera	8cb8f1cfdd	Switch to hardware delays and timeouts via a hardware timer in the V2 Protocol handler. More additions to the PROGRAM_FLASH_ISP and PROGRAM_EEPROM_ISP commands, although neither work correctly yet. Added dummy RESET_PROTECTIONS handler to prevent the Atmel driver from crashing when the command returns an UNKNOWN_COMMAND error code.	16 years ago
Dean Camera	92adb00f8e	Added PROGRAM_FLASH_ISP and PROGRAM_EEPROM_ISP handler code to the V2 Protocol handler in the AVRISP project, programming complete checks not yet complete.	16 years ago
Dean Camera	f9c0357b73	Fixed V2 Protocol READ_FLASH_ISP and READ_EEPROM_ISP handler code in the AVRISP project.	16 years ago
Dean Camera	bff4dbe189	Fix to V2 Protocol for Fuse/Sig/Lock byte read -- off by one error on the array when writing back the response from the device. FLASH/EEPROM reading and writing currently broken and unfinished, respectively.	16 years ago
Dean Camera	dbb5f249bd	Added V2 protocol handlers for the READ and WRITE memory commands in the AVRISP project. Finished READ command handler, skeleton WRITE handler implemented.	16 years ago
Dean Camera	7e74bd3ea2	Moved out target-related V2 protocol commands into a seperate file for the AVRISP project. Added Load Extended Command functionality to the LOAD ADDRESS V2 Protocol command handler for devices with more than 64KB of memory.	16 years ago
Dean Camera	f229502d9a	Fixed AVRISP programmer demo -- can now connect to a target and read/write Sig/Lock/Fuse/OSCCAL bytes successfully. Changed SPI_Init() to allow for the clock polarity and data sample modes to be set. Changed Dataflash_Init() to no longer call SPI_Init() automatically.	16 years ago
Dean Camera	1e8df8951a	Added V2Protocol handlers to the AVRISP project to enter/exit programming mode, and read/write fuses, lockbits, OSCCAL and Signature bytes. Added ShutDown functions for all hardware peripheral drivers, so that peripherals can be turned off after use.	16 years ago
Dean Camera	5acf23b254	Renamed Projects/Unfinished to Projects/Incomplete for consistancy.	16 years ago

40 Commits (61a799ed55c5e4d5d0fd8dd4b35bfe57db33822e)