cd0bd7bf90
Added new JTAG_ENABLE() macro for the AVR8 architecture. Fixed the JTAG_DISABLE() macro clearing all other bits in MCUSR when called.
...
Moved the XPLAIN board specific bootloader entry condition code to the Application_Jump_Check() function of the DFU bootloader, added support for the original XPLAIN board to the CDC class bootloader.
13 years ago
8f2e82bd61
Minor cleanup to Attributes.h spacing and rename old multiple-inclusion macro guard.
13 years ago
851fcd0c2f
Make sure that LUFAConfig.h is included *after* the common submodules, so that the architecture and other defines are available to the configuration header.
13 years ago
395e4287a1
Added support for the Olimex AVR-USB-32U4 and Olimex AVR-USB-T32U4 boards.
13 years ago
69ecaae732
Added support for the DorkbotPDX Duce board.
13 years ago
47f6a35013
Reintegrate the FullEPAddresses development branch into trunk.
13 years ago
fde181a830
Minor documentation improvements.
13 years ago
ae91ccc048
Fix up Doxygen documentation directives to allow for generation of documentation when the library code root folder is not "LUFA".
13 years ago
01d5af3d6c
Add XMEGA C3 family to the ModuleTest build test.
...
Remove unnecessary GCC_MEMORY_BARRIER() at the end of GetGlobalInterruptMask().
Minor documentation improvements.
13 years ago
e406140f11
Minor documentation fixes - change \note entries to \warning where appropriate and remove/update old documentation.
13 years ago
5561524a8f
Added support for the BitWizard Multio and Big-Multio boards.
13 years ago
1132488e8f
Add build tests to verify correct compilation of as many modules as possible under as many architectures as possible.
...
Fix broken compilation of LUFA under C++ compilers when the Serial peripheral module header file is included in a C++ source file.
Fix missing semicolon in the UC3 architecture host pipe functions.
Fix failed compilation for the XMEGA architecture if USB_DEVICE_ONLY us not specified.
13 years ago
4d131de85b
Add board driver support for the Atmel XMEGA-B1 Xplained board.
...
Fix Dataflash driver for the A3BU-Xplained board.
Minor documentation improvements.
13 years ago
da676f0f70
Add support for the Micropendous (Arduino-like) series of boards (revisions 1 and 2).
13 years ago
f1b6ddb710
Update file contributor copyrights for 2012.
13 years ago
2c806f6cee
Update file header copyrights for 2012.
13 years ago
3dacb73af3
Fix errors in the new Micropendous board drivers. Reorder the board definition macro indexes so that misspelled board names default to BOARD_USER rather then BOARD_USBKEY.
13 years ago
10a56f6105
Add support for the Micropendous series of USB AVR8 boards.
13 years ago
8d2cb61a5b
Minor documentation fixes.
13 years ago
f201f6697b
Run wspurify script on /trunk/ and /branches/ C source files, to remove any trailing whitespace at the end of each line.
13 years ago
77f354609f
Fixed compiler warning on GCC with -wundef compile flag is used (thanks to Georg Glock).
13 years ago
70f3d8e933
Add support for the Paranoid Studio USB2AX boards (hardware revisions 1-3).
13 years ago
e915d968a5
Added new USB_Host_GetDeviceConfiguration() and USB_Host_GetInterfaceAltSetting() functions.
13 years ago
4f223302b1
Oops: Typo on the new TEENSY2 board support.
13 years ago
a81ccd83fd
Added support for version 2 of the Teensy boards (thanks to Christoph Redecker).
13 years ago
e30be658c9
Add missing SVN eol-style property to ensure that source code line endings and converted to the native values on checkout.
13 years ago
0ad6f1fb53
Add partial support for the Atmel A3BU Xplained's Dataflash IC (physical USART-as-SPI transport driver still pending).
13 years ago
00ad509061
Add support for the Atmel XMEGA A3BU Xplained board.
...
More XMEGA USB core fixes.
13 years ago
77dbfd3cc4
Add missing "used" attribute to ATTR_INIT_SECTION to ensure functions declared with that meta-attribute are not discarded by the linker.
...
Add missing function and definition documentation.
13 years ago
022fa26b43
Fix missing C++ linkage command in ArchitectureSpecific.h.
...
Fix missing closing brace in an Endpoint function for the UC3 targets.
13 years ago
413438eb23
Add new TWI_BITLENGTH_FROM_FREQ() macro to the AVR8 TWI peripheral driver.
...
Change Delay_MS() to accept a 16-bit parameter rather than an 8-bit parameter for longer possible delays.
Minor documentation improvements.
14 years ago
a233109909
Renamed USB_Host_ClearPipeStall() to USB_Host_ClearEndpointStall() as the function works on an endpoint address within the attached device, and not a Pipe within the host.
...
Updated MS_Host_ResetMSInterface() to now perform a full Mass Storage reset sequence to prevent data corruption in the event of a device lock up or timeout (thanks to David Lyons).
Add parenthesis around the library Endianness macros that do nothing on a particular architecture to prevent operator precedence issues depending on usage.
Minor documentation corrections.
14 years ago
cff190b8f4
Minor documentation fixes.
...
Add extra parenthesis around terms in the common MIN() and MAX() macros to prevent issues with non-trivial macro inputs (thanks to David Lyons).
14 years ago
d0ac8e46f9
Renamed the JTAG_DEBUG_ASSERT() macro to JTAG_ASSERT().
...
Changed the reports in the GenericHID device demos to control the board LEDs, to reduce user confusion over the callback routines.
Fixed swapped TWI_ADDRESS_READ and TWI_ADDRESS_WRITE values.
Fixed TWI_ReadPacket() not releasing the TWI bus on read completion.
14 years ago
fc5fa769ef
Pull out architecture specific macros and other definitions into a new common header file. Add new JTAG_DISABLE() macro for the AVR8s to software-disable JTAG debugging using cycle-safe assembly code.
14 years ago
3478178127
Add shortcuts to SwapEndian_16() and SwapEndian_32() internal functions to improve optimization if called with constant inputs.
14 years ago
0c2ad9eb34
Add missing SVN eol-style property to files where it was missing.
14 years ago
01d269879f
Add new STRINGIFY() and STRINGIFY_EXPANDED() convenience macros.
14 years ago
d9643cf6ec
Add start of an architecture port to the Atmel USB XMEGA devices.
14 years ago
bcb627e1a1
Add missing doxygen group terminator to the new CompilerSpecific.h header file.
14 years ago
bfa22eca26
Split out compiler specific helper macros into a new CompilerSpecific.h header file inside the library, for future expansion.
14 years ago
8c3d421a01
Added board hardware driver support for the EVK1104 board.
...
Fix inverted LEDs_GetLEDs() result for the EVK1100 and EVK1101 boards.
14 years ago
8cc3fd56d9
Add board driver support for the EVK1100 board.
14 years ago
d784baaa3a
Fixed compile error when FIXED_CONTROL_ENDPOINT_SIZE compile time option was disabled, and a USE_*_DESCRIPTORS compile time option was not enabled on the AVR8s.
...
Add C++ compatibility to some header files currently missing extern "C" linkage.
14 years ago
3bd6336075
Added board driver support for the Busware TUL board.
14 years ago
f01a05415c
Spell check library source code files.
14 years ago
7d3150423d
Add new USE_LUFA_CONFIG_HEADER compile time option.
...
Add missing LEDS_ToggleLEDs() function to the LED driver for the EVK1101 board.
14 years ago
a85fa30bf1
Minor documentation fixes.
14 years ago
f670bdeff8
Add __VA_ARGS__ support to the LUFA supplied ISR macro. Add proper result typecasting to the SWAPENDIAN_* macros.
...
Switch to using -1 on the UC3 target to obtain a register mask with all bits set (for clearing interrupts and status flags).
Fix incorrect USB controller mode on the UC3 when a fixed mode is specified as a compile time option due to AVR32_USBB.USBCON.uide being set by default.
Make USB_Descriptor_String_t use a uint16_t for Unicode strings on all targets except the AVR8 (retained for backwards compatibility).
14 years ago
04263de4f0
Fix definition of pgm_read_ptr().
14 years ago
Dean Camera