26421b38cd
Fix up Bluetooth Demo's options processing on incoming channel configuration requests.
15 years ago
28f1ac8117
Add LUFA-side channel open/close routines, add signalling handlers for the creation and configuration of channels from the local device to the remote device, to add to the existing remote to local channel capabilities.
15 years ago
797130bddc
Bluetooth demo can now create and maintain logical channels - need to determine why Windows machines refuse to connect.
15 years ago
2a072db703
Make Bluetooth signalling handler routines use the generic Bluetooth_SendPacket() routine for their responses. Use a better method of controlling the debug output verbosity.
15 years ago
c77f136661
Add bidirectional channel configuration -- remote device is not ACKing sent Configuration Requests, needs further debugging. Implement Bluetooth spec's channel states.
...
Use abbreviations for the structure and function names where possible to try to cut down on the code verbosity.
15 years ago
b9c7d19615
Add packet reception and send routines to the ACL layer of the incomplete Bluetooth Host demo.
15 years ago
ee74b4948f
Add information request/response signal handler to the Bluetooth Host demo.
...
Ensure that the AVRISP-MKII project's Windows avrdude compatibility define is named properly in all parts of the code.
15 years ago
083d797aca
Add Bluetooth signalling echo request/response handlers, disconnection request/response handlers.
...
Add Bluetooth connection request/complete/disconnection callbacks.
Remove debugging from HCI layer, as it is now operational -- add guards to ACL debug statements to reduce logging chattyness so that the overall command sequences can be observed and debugged.
15 years ago
fa1a092901
Add user callback function to the Bluetooth host demo to filter out connections from remote devices. Add in ability to reject connections based on their bluetooth device address.
...
Clean up RelayBoard project code.
Make AVRISP project clear the XMEGA target's reset register twice; this does not appear to take affect properly the first time under some circumstances.
15 years ago
fd96b28882
More improvements to the incomplete BluetoothHost demo - add Disconnection Event processing.
...
Remove unused macro in the host mode demos for the maximum Configuration Descriptor size.
15 years ago
a2e6d54336
Massive cleanups to the incomplete BluetoothHost demo, to make the HCL layer code much easier to read, block less and work correctly.
15 years ago
c58c53dba9
Added incomplete MIDIToneGenerator project.
15 years ago
15f84bb8f5
New BOARD value option BOARD_NONE (equivelent to not specifying BOARD) which will remove all board hardware drivers which do not adversely affect the code operation (currently only the LEDs driver).
...
Spell-check code/comments in the Webserver/AVRISP-MKII projects.
15 years ago
7f9f97c792
Update copyright year to 2010.
15 years ago
0ea819f781
Fix TemperatureDataLogger - sample tick timer wasn't being initialized in the correct CTC mode.
15 years ago
d4ca7fb44c
Fix MIT license language to make its intent clearer.
15 years ago
3705330dd3
Use -pedantic compile time option to find and correct several minor code errors.
15 years ago
7ace314cc1
Increase timeout of Mass Storage and Still Image host commands to 10 seconds (up from 5) to account for slow-processing devices.
...
Added brace guards to macros with parameters to prevent unintended changed evaluation of the macro expression.
Minor code cleanups (remove redundant comments, fix spacing, etc.).
15 years ago
8c6c27d88b
Added new RNDISHost Host LowLevel demo. Fixed misnamed Pipe_SetPipeToken() macro for setting a pipe's direction. Fixed CDCHost failing on devices with bidirectional endpoints.
15 years ago
7ef58eef7a
Fixed LowLevel Keyboard demo not saving the issued report only after it has been written to the endpoint.
...
Added support for multiple keyboard keycodes in a single report to the LowLevel and ClassDriver Keyboard demos.
15 years ago
9b20114555
Make RNDISHost demo validate the set Packet Filter to ensure that it is being sent correctly.
...
Add new (incomplete) StandaloneProgrammer project, using the ELM Petite FAT library to read files stored on the board's dataflash by the host.
15 years ago
588886878e
Corrections, improvements and additions to the incomplete RNDISHost demo.
...
Change device demos which use the joystick to use the natural UP, DOWN, LEFT, RIGHT ordering in all demos when checking the joystick's position.
15 years ago
e625fd6df3
Corrected the name of the misnamed USB_GetDeviceConfigDescriptor() function to USB_Host_GetDeviceConfigDescriptor().
15 years ago
2626ecb261
Extend incomplete RNDISHost demo -- can not enumerate a RNDIS device correctly and set the packet filter. No packets are received yet from the test device, need to investigate additional SET commands to see if any critical OIDs have been missed.
15 years ago
6a46f0025a
Add beginnings of a RNDIS Ethernet Host demo.
15 years ago
d6edfe35c8
Spell check all source code variables, comments and strings.
15 years ago
34dc7f241f
Make Low Level host demos use void pointers for the configuration descriptor, to prevent warnings when passed to the altered configuration descriptor parsing routines.
...
Added preprocessor checks to give a human readable error when the class drivers are used when the incompatible NO_STREAM_CALLBACKS compile time option is used.
15 years ago
c3dfc58707
Fix invalid Event name rule in demo/project makefiles.
15 years ago
fa8d25ef29
Remove old OTG demo directory with useless TestApp demo. Add new DualRole directory with new Class Driver powered Mouse dual role demonstration application showing a dual role device using the HID host/device Class drivers.
15 years ago
b221e7d175
Remove USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token, split out standard descriptors into seperate USB_Descriptor_* and USB_StdDescriptor_* structures so that both can be used within the one project.
...
Add guard to the HID Host Class driver SetProtocol command, to ensure that the device supports boot protocol mode before issuing the request.
16 years ago
0486f12e3e
Add in new invalid event hook check targets to project makefiles to produce compilation errors when invalid event names are used in a project.
...
Re-add in flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.)
Fix allowable F_CPU values comment in project makefiles.
16 years ago
f9f1bcc25c
Oops - with new changes to the way the device Configuration Descriptor is retrieved from the device, ensure that the correct position pointer is cast when extracting descriptor parameters.
16 years ago
7fbb759287
Changed the parameters and behaviour of the USB_GetDeviceConfigDescriptor() function so that it now performs size checks and data validations internally, to simplify user code.
16 years ago
0f51db56c0
Replace -finline-limit with -fno-inline-small-functions in project makefiles.
16 years ago
c830fcb0e1
Make Endpoint control transfers more reliable; early-abort when an incomplete packet is sent from the host (indicating end of transfer), add check for control reads to ensure that no more than wLength bytes are read from the interface.
...
Condense sequential printf_P/puts_P calls to single printf_P calls for size and clarity.
16 years ago
c5038f1bf4
Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.
...
Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.
Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.
16 years ago
3472af91a5
Change project makefiles so that the current target settings and not just the board selection is printed during the build process.
...
Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.
16 years ago
e071f3897a
Added new USB_DeviceState variable to keep track of the current Device mode USB state.
...
Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.
Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.
Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.
Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
16 years ago
2a90f66de2
Moved PrinterHost demo from Incomplete to LowLevel, as it is now near-complete.
16 years ago
f3c061d5c8
Fixed PrinterHost demo Printer_GetDeviceID() routine not removing the Device ID string length from the start of the returned array (thanks to John Andrews).
...
Fixed error in new pipe stream function template system not setting the right device token for R/W operations (also thanks to John Andrews).
16 years ago
211712d66d
Remove ClearPipeStall routine from the StillImageHost demo, as there is now a version of the function built into the library itself.
16 years ago
4c035b14f1
Cleaner solution to the PrinterHost data send routine problem of embedded NULLs - use a special structure to hold the data string plus the length in bytes of the data.
16 years ago
5d8cdd9bea
Fix unfinished printer host demo - some printer languages use embedded NULLs and so strlen() won't work in all cases. Ensure NULL terminator for the test page is not transmitted to the device.
16 years ago
cf313989e6
Don't send terminal RESET codes via serial - just set the foreground colour and assume the user has the background set to something sane, so that the demos don't wipe out custom user terminal settings.
16 years ago
cc879df4f0
Use sane ANSI terminal escape codes for the Host mode demos, so that they do not cause eye-searing, unreadable text on terminals which parse the escape codes properly.
16 years ago
786479faf0
Add partial project documentation to the incomplete PrinterHost demo.
...
Change over Printer_GetDeviceID() to require a pointer to the destination buffer plus the buffer size, rather than using a pointer to a special structure.
Make new Printer_SendData() function to hide the implementation of sending data to an attached printer, cleaning up the main demo source file body.
16 years ago
d3fb6273aa
Fix PrinterHost demo so that it will only enumerate printers with Bidirectional protocol encapsulation. Change enumeration code to automatically select the correct alternate setting for the printer interface to select the bidirectional protocol.
16 years ago
9d2613d908
Fixed incorrect PIPE_EPNUM_MASK mask causing pipe failures on devices with endpoint addresses of 8 and above (thanks to John Andrews).
16 years ago
b243c2b80b
Magstripe Project: Ensure that empty tracks still print out a newline seperator so that the host always knows what track data is being sent.
...
Updates to PrinterHost demo to include some PCL test data plus fixes to the GetDeviceID routine.
16 years ago
0fcbe22c9e
Added new HOST_STATE_WaitForDeviceRemoval host state machine state for non-blocking disabling of device communications until the device has been removed (for use when an error occurs or communications with the device have completed). Changed over all host mode demos to use the new state.
...
Added verbose documentation for each of the USB Host state machine states.
16 years ago
a54ed0085b
Seperated out parts of the PrinterHost incomplete demo into a seperate Lib subdirectory.
...
Fixed Host mode to Device mode UID change not causing a USB Disconnect event when a device was connected.
16 years ago
23f3c3deee
Fixed compilation error in incomplete BluetoothHost demo.
16 years ago
e0af6014a7
Added incomplete PrinterHost demo application.
...
Seperated out Lib components of the incomplete BluetoothHost demo application out into a seperate Lib subfolder.
Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case.
16 years ago
a3a04aa671
Pipe_ConfigurePipe() now automatically defaults IN pipes to accepting infinite IN requests, this can still be changed by calling the existing \ref Pipe_SetFiniteINRequests() function.
16 years ago
feabfd12ce
Fix makefiles -- the auto-addition of -D switches to each LUFA compile time option was faulty, due to GNUMake becomming confused by the spaces in the USE_STATIC_OPTIONS lines. Make user add in the switches explicitly instead.
16 years ago
beb0b2bda0
Move LUFA compile time options to a new section in the application makefiles for clarity.
16 years ago
dfa547164a
Extend USB_GetDeviceConfigDescriptor() routine to require the configuration number within the device to fetch, to add support for multi-configuration devices.
16 years ago
e338cb6f32
Added new USB_Host_ClearPipeStall() convenience function to clear a stall condition on an attached device's endpoint.
...
Added new USB_Host_GetDeviceDescriptor() convenience function to retrieve the attached device's Device descriptor.
Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is cleared to prevent endpoint type corruption.
Fix documentation mentioning Pipe_GetCurrentToken() function when real name is Pipe_GetPipeToken().
16 years ago
4d3a594f3e
Changed per-device controller preprocessor checks over to per-device series for better device control.
...
Fixed error in Endpoint.c using HSOFI rather than SOFI for counting elapsed milliseconds.
16 years ago
6be24e4404
Fixes to the MIDI device demos (ClassDriver, LowLevel); discard unused read-in events from the host, use standard MIDI event structure in low level demo rather than sending individual bytes.
16 years ago
ac70ddd0a1
Converted Host mode demos to schedulerless. Fixed host mode broken due to earlier Start-of-frame event experiments.
16 years ago
2793c88fc6
Add master device Host demo makefile.
...
Copy and convert incomplete Bluetooth Host demo to the library.
16 years ago
Dean Camera