Dean Camera
c8942ef469
Fixed LowLevel JoystickHostWithParser demo not saving the chosen HID interface's report descriptor size.
...
Simplified low level Host demo configuration descriptor parser routines.
14 years ago
Dean Camera
7166c7ba3e
Fix low level host mode demos not correctly fetching the next endpoint when an invalid interface is discarded.
...
Update the pipe configuration routines in the host mode class drivers so that they use the same new code to enumerate compatible devices to increase reliability. Add support to the host mode class drivers for non-sequential (but non-overlapping with other interface) pipe numbers.
14 years ago
Dean Camera
158afe9109
Reverted Endpoint/Pipe non-sequential configuration hack, placed restriction on the configuration order instead to ensure maximum reliability.
...
Altered all low level device and host mode demos to ensure that endpoints and pipes are configured in ascending order properly.
Rewrote all low level host mode demos' configuration descriptor parser code to ensure that pipes are enumerated in ascending order, and to ensure maximum compatibility with devices.
Incremented all device mode demo's device descriptor revision numbers to ensure that any descriptor changes are re-fetched on machines which have enumerated previous versions.
14 years ago
Dean Camera
713670043a
Move out many of the common class driver constants into grouped enums, to make them more managable.
...
Add new CDC descriptor structs to the CDC class driver, so that the CDC demos can use human readable field names.
Rename prefix for Still Image Host class driver functions from "SImage_" to "SI_" to remain consistent with the rest of the driver.
14 years ago
Dean Camera
800485bd95
Remove dfu-programmer program switches, to ensure maximum compatibility with all dfu-programmer versions.
14 years ago
Dean Camera
bd85422d2b
Added the --suppress-bootloader-mem option to the makefile dfu target, to ensure that writes to the bootloader section of the AVR's flash memory are ignored (thanks to Axel Rohde).
...
Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target.
Makefile whitespace fixes.
14 years ago
Dean Camera
5f3c4cc6e0
Reverted modifications to USBInterrupt.h that were intefering with correct host mode operation.
...
Fixed SUSPI interrupt not being cleared during device mode enumeration, causing accidental mis-fires on re-enumeration.
Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode.
14 years ago
Dean Camera
6d2f091cec
Make project makefiles correctly clean intermeditary build files from assembly and C++ sources (thanks to Daniel Czigany).
14 years ago
Dean Camera
c166dfc64e
Added class specific descriptor type defines with standard USB-IF element naming.
15 years ago
Dean Camera
7aaf9b2036
Added new PRNT_Host_BytesReceived() and PRNT_Host_ReceiveByte() functions to the Print Host Class driver.
15 years ago
Dean Camera
18cbd31605
Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number.
...
Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application handling of USB Start of Frame events while in USB Host mode.
Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible to free up the Start of Frame flag for interrupt use in the user application.
15 years ago
Dean Camera
4dece08bef
Clarify in the project documentation files what the each of the different USB AVR device "series" comprises of.
15 years ago
Dean Camera
b7b8a9edfa
Fixed LowLevel PrinterHost demo not sending control requests to the attached printer with the correct printer interface wIndex value.
15 years ago
Dean Camera
ad4308b1d1
Added new SCSI_ASENSE_NOT_READY_TO_READY_CHANGE constant to the Mass Storage class driver, to indicate when a previously not ready removable medium has now become ready for the host's use (thanks to Martin Degelsegger)
15 years ago
Dean Camera
eb060db71b
Tighten up the code in the delta movement detection code in the MouseHostWithParser and JoystickHostWithParser demos. Make the ClassDriver JoystickHostWithParser demo use the HID_ALIGN_DATA() macro instead of manual shifting and casting.
15 years ago
Dean Camera
5f3a1b2629
Fix invocations of avr-size in all makefiles broken on unpatched *nix systems, due to the recent update to the latest WinAVR makefile template.
15 years ago
Dean Camera
48c5cdced4
Hide the PROGMEM attribute from Doxygen, as it appears to confuse the parser in some situations.
15 years ago
Dean Camera
612df774d9
Oops - fix mixed "initialize" and "initialise" - opt for American spelling due to its wide use in technical standards.
15 years ago
Dean Camera
0f45b9c8e0
More spell checking of all source files -- correct missed errors, switch to EN-GB spelling dictionary.
15 years ago
Dean Camera
24e621a8d8
Altered the CDC Deivice and Host Class drivers' receive byte routines, so that no data is indicated by a negative return value.
...
Added auto flushing of OUT data to the CDC Host Class driver's USBTask function to automatically flush the send pipe buffer.
15 years ago
Dean Camera
7c8d16fd7a
Oops - need to turn off USART via control register B before reconfiguring, fix ordering of USART control register modifications in the Benito and USBtoSerial projects.
15 years ago
Dean Camera
28401f7bb7
Spell check all source files once again to find any typos.
15 years ago
Dean Camera
cd39c38d5f
Rename reserved members of all structs so that they are uniformly named across all demos/projects/bootloaders.
...
Added start of the Incomplete TMC demo's command parser code.
15 years ago
Dean Camera
6bda628718
Update all demos, projects and bootloaders to indent all function parameters, one per line, for better readability.
...
Add missing const qualifiers to the demos.
15 years ago
Dean Camera
6b5e684c77
Update makefiles to use the latest WinAVR/Atmel toolchain makefile template.
...
Add new module source variables to the library core makefile, so that module sources can be added to a project's makefile on a per-module rather than per-file basis.
15 years ago
Dean Camera
42ac34b484
Change over all makefiles to use C99 standards mode, rather than C99 + GNU Extensions.
15 years ago
Dean Camera
9299735c75
Disable strict aliasing explicitly in the project makefiles, as this is apparently enabled by default in newer AVR-GCC builds, and aliasing is used heavily for type-punning through the LUFA and third party library's codebase.
15 years ago
Dean Camera
f4710f6f86
Removed the automated checking of event names in the demo, project and bootloader makefiles due to inconsistancies between the behaviour of the command line tools used to perform the check on each platform.
...
Removed the internal endpoint and pipe memory allocation macros, as this is already performed directly in the code. Simplify the endpoint and pipe reset procedure.
15 years ago
Dean Camera
658da63e6c
Add AVRStudio 4 project files to the ClassDriver Host mode demos.
15 years ago
Dean Camera
20943fa1aa
Add AVRStudio 4 project files to the LowLevel Host mode demos.
15 years ago
Dean Camera
1167b69943
Add missing eol-style properties to new source files.
15 years ago
Dean Camera
ae9dab1398
Add missing clean_doxygen phony targets to the project makefiles.
15 years ago
Dean Camera
2b0d93c129
Correct misspellings in the Bluetooth demo code.
15 years ago
Dean Camera
f6e84eabce
Add more doxygen function documentation to the RFCOMM layer.
15 years ago
Dean Camera
00fa6aa2db
Oops - ACL layer Bluetooth_SendPacket() function should check and allow NULL channels, since that indicates a control channel request.
...
Fix up Doxgen documentation for the Bluetooth stack code.
15 years ago
Dean Camera
6276d5f82a
Rename Bluetooth stack function parameters to clearly indicate what sort of Bluetooth channel (ACL, RFCOMM) is required for each parameter, to make the code easier to read.
...
Add a new RFCOMM_ChannelSignalsReceived() Bluetooth stack callback from the RFCOMM layer for when the remote device sends new terminal control signals.
Fix RFCOMM_SendData() not aborting correctly when the requested RFCOMM channel is not found.
15 years ago
Dean Camera
2b0e86243f
Add a new RFCOMM_ChannelOpened() callback event for when logical RFCOMM channels are opened in the BluetoothHost demo. Make the demo echo back sent characters to the remote device.
15 years ago
Dean Camera
c37fd0ef91
Add a new RFCOMM service callback for when new data has been received on a valid RFCOMM channel.
15 years ago
Dean Camera
70983caea5
Move out Bluetooth stack callback functions to a seperate BluetoothEvents.c/.h set of files for clarity in the Incomplete BluetoothHost demo. Add a new stack callback for opened ACL channels, make the demo save the RFCOMM channel when opened so that it does not have to search for it on each iteration of the main program loop.
15 years ago
Dean Camera
8b053d6ba5
Added new Drivers/USB/LowLevel/Device.c file to house Device mode specific functions that are more complicated than simple macros. Moved USB_Device_SendRemoteWakeup() to the new Device.c source file and corrected it to unfreeze and restart the USB controller clock before issuing a Remote Wakeup request.
...
Removed the USB_Device_IsRemoteWakeupSent() and USB_Device_IsUSBSuspended() macros, as they are now obsolete.
15 years ago
Dean Camera
31a34154db
Move out RFCOMM channel structure init code to a seperate routine, to save on compiled code space and to prevent copy-paste errors.
15 years ago
Dean Camera
fbabecee66
Add RFCOMM service routine, to send pending configuration requests on RFCOMM channels. Add in RFCOMM channel config flags, to determine which configuration commands have been sent and received.
...
Add a new RFCOMM_SendChannelSignals() function to transmit a change in V24 terminal handshake lines to the receiving device.
Prevent SABM packets sent to the control DLCI in the RFCOMM layer from creating a new channel entry, as the control DLCI does not have connection data associated with it.
Fix up MSC control packet handling so that received responses can be acknowledged correctly, so that the RFCOMM layer can record when the receiving device has ACKed a sent change in V24 terminal handshake lines.
15 years ago
Dean Camera
b656540468
Make Bluetooth ACL channel searches skip over closed (invalid) channels. RFCOMM channels are considered invalid when the channel state is closed, not when the DLCI is zero - fix incorrect code.
15 years ago
Dean Camera
d29a408ffd
Add default "all" makefile targets to the demo tree makefiles.
15 years ago
Dean Camera
4b952d479a
Split RFCOMM channel signals into Remote and Local pairs. Use memcpy() to copy over data from the command parameters to the RFCOMM response parameters.
...
Ensure that only the valid parameter bytes are sent back in response to MSC commands.
15 years ago
Dean Camera
2eff731ecf
Add TEST RFCOMM command handler. Remove the RFCOMM channel UseUIFrame element, as the Bluetooth adaptions to RFCOMM only allow UIH frames to be used.
15 years ago
Dean Camera
559af02204
Use a bitmask instead of an array of bools in the SDP UUID List matching algorithm to reduce the compiled code size and stack used.
15 years ago
Dean Camera
e621ab33be
Added new pgm_read_ptr() macro to Common.h for reading of pointers out of flash memory space.
...
Added new SWAPENDIAN_16() and SWAPENDIAN_32() macros to Common.h for statically initialized variables at compile time.
15 years ago
Dean Camera
13ea700b35
Rename RFCOMM_GetFrameDataLength() to RFCOMM_GetVariableFieldValue() as it is multi-purpose, and modify it to move the buffer pointer itself rather than relying on the caller.
...
Make RFCOMM_GetChannelData() return NULL if the required channel DLCI is found, but the channel is closed.
Add modem signals (BREAK, DCD, etc.) to the channel state array, and add in a handler for the Modem Status RFCOMM control command.
15 years ago
Dean Camera
f5d079462d
Changed the RFCOMM-specific ItemProtocolChannel_t type to a more generic ItemProtocol_8BitParam_t name, and added a new ItemProtocol_16BitParam_t to the SDP protocol type defines.
15 years ago