bb85d083a7
Fix warnings and errors found by the new cppcheck provided static code analysis.
13 years ago
63a65a9598
Minor documentation fixes - change \note entries to \warning where appropriate and remove/update old documentation.
13 years ago
f1b6ddb710
Update file contributor copyrights for 2012.
13 years ago
2c806f6cee
Update file header copyrights for 2012.
13 years ago
fc4d3ab400
Minor documentation improvements.
13 years ago
d0ac8e46f9
Renamed the JTAG_DEBUG_ASSERT() macro to JTAG_ASSERT().
...
Changed the reports in the GenericHID device demos to control the board LEDs, to reduce user confusion over the callback routines.
Fixed swapped TWI_ADDRESS_READ and TWI_ADDRESS_WRITE values.
Fixed TWI_ReadPacket() not releasing the TWI bus on read completion.
13 years ago
7dffa15c16
Massive corrections to the project documentation and code comments, thanks to Russian translation services provided by Andrey from Microsin.ru.
14 years ago
0210fa5648
Fixed compile errors in the incomplete BluetoothHost demo application (thanks to Timo Lindfors).
14 years ago
f01a05415c
Spell check library source code files.
14 years ago
852b5e612d
Remove redundant type information for bitfield elements, other than the signed/unsignedness of the element.
...
Change type of USB_SelectedPipe and USB_SelectedEndpoint for the AVR32 UC3 architecture to uint32_t to reduce the compiled code size.
14 years ago
afd828c095
Removed SerialStream module, rolled functionality into the base USART Serial peripheral driver instead through the new Serial_CreateStream() and Serial_CreateBlockingStream() methods.
...
Renamed the Serial byte send/receive functions to remain consistent with the CDC driver's byte functions.
Altered the serial byte receive function to make it non-blocking.
14 years ago
1d433d4506
Update copyright year on all source files.
14 years ago
cb779e3d7d
Changed over www.fourwalledcubicle.com links to the new www.lufa-lib.org redirect domain, including the new aliased links for LUFA-related pages such as the various download/source control mirrors and support lists.
14 years ago
5a4def7478
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda
14 years ago
158afe9109
Reverted Endpoint/Pipe non-sequential configuration hack, placed restriction on the configuration order instead to ensure maximum reliability.
...
Altered all low level device and host mode demos to ensure that endpoints and pipes are configured in ascending order properly.
Rewrote all low level host mode demos' configuration descriptor parser code to ensure that pipes are enumerated in ascending order, and to ensure maximum compatibility with devices.
Incremented all device mode demo's device descriptor revision numbers to ensure that any descriptor changes are re-fetched on machines which have enumerated previous versions.
14 years ago
0f45b9c8e0
More spell checking of all source files -- correct missed errors, switch to EN-GB spelling dictionary.
14 years ago
28401f7bb7
Spell check all source files once again to find any typos.
14 years ago
6bda628718
Update all demos, projects and bootloaders to indent all function parameters, one per line, for better readability.
...
Add missing const qualifiers to the demos.
15 years ago
1167b69943
Add missing eol-style properties to new source files.
15 years ago
2b0d93c129
Correct misspellings in the Bluetooth demo code.
15 years ago
f6e84eabce
Add more doxygen function documentation to the RFCOMM layer.
15 years ago
00fa6aa2db
Oops - ACL layer Bluetooth_SendPacket() function should check and allow NULL channels, since that indicates a control channel request.
...
Fix up Doxgen documentation for the Bluetooth stack code.
15 years ago
6276d5f82a
Rename Bluetooth stack function parameters to clearly indicate what sort of Bluetooth channel (ACL, RFCOMM) is required for each parameter, to make the code easier to read.
...
Add a new RFCOMM_ChannelSignalsReceived() Bluetooth stack callback from the RFCOMM layer for when the remote device sends new terminal control signals.
Fix RFCOMM_SendData() not aborting correctly when the requested RFCOMM channel is not found.
15 years ago
2b0e86243f
Add a new RFCOMM_ChannelOpened() callback event for when logical RFCOMM channels are opened in the BluetoothHost demo. Make the demo echo back sent characters to the remote device.
15 years ago
c37fd0ef91
Add a new RFCOMM service callback for when new data has been received on a valid RFCOMM channel.
15 years ago
70983caea5
Move out Bluetooth stack callback functions to a seperate BluetoothEvents.c/.h set of files for clarity in the Incomplete BluetoothHost demo. Add a new stack callback for opened ACL channels, make the demo save the RFCOMM channel when opened so that it does not have to search for it on each iteration of the main program loop.
15 years ago
31a34154db
Move out RFCOMM channel structure init code to a seperate routine, to save on compiled code space and to prevent copy-paste errors.
15 years ago
fbabecee66
Add RFCOMM service routine, to send pending configuration requests on RFCOMM channels. Add in RFCOMM channel config flags, to determine which configuration commands have been sent and received.
...
Add a new RFCOMM_SendChannelSignals() function to transmit a change in V24 terminal handshake lines to the receiving device.
Prevent SABM packets sent to the control DLCI in the RFCOMM layer from creating a new channel entry, as the control DLCI does not have connection data associated with it.
Fix up MSC control packet handling so that received responses can be acknowledged correctly, so that the RFCOMM layer can record when the receiving device has ACKed a sent change in V24 terminal handshake lines.
15 years ago
b656540468
Make Bluetooth ACL channel searches skip over closed (invalid) channels. RFCOMM channels are considered invalid when the channel state is closed, not when the DLCI is zero - fix incorrect code.
15 years ago
4b952d479a
Split RFCOMM channel signals into Remote and Local pairs. Use memcpy() to copy over data from the command parameters to the RFCOMM response parameters.
...
Ensure that only the valid parameter bytes are sent back in response to MSC commands.
15 years ago
2eff731ecf
Add TEST RFCOMM command handler. Remove the RFCOMM channel UseUIFrame element, as the Bluetooth adaptions to RFCOMM only allow UIH frames to be used.
15 years ago
559af02204
Use a bitmask instead of an array of bools in the SDP UUID List matching algorithm to reduce the compiled code size and stack used.
15 years ago
e621ab33be
Added new pgm_read_ptr() macro to Common.h for reading of pointers out of flash memory space.
...
Added new SWAPENDIAN_16() and SWAPENDIAN_32() macros to Common.h for statically initialized variables at compile time.
15 years ago
13ea700b35
Rename RFCOMM_GetFrameDataLength() to RFCOMM_GetVariableFieldValue() as it is multi-purpose, and modify it to move the buffer pointer itself rather than relying on the caller.
...
Make RFCOMM_GetChannelData() return NULL if the required channel DLCI is found, but the channel is closed.
Add modem signals (BREAK, DCD, etc.) to the channel state array, and add in a handler for the Modem Status RFCOMM control command.
15 years ago
f5d079462d
Changed the RFCOMM-specific ItemProtocolChannel_t type to a more generic ItemProtocol_8BitParam_t name, and added a new ItemProtocol_16BitParam_t to the SDP protocol type defines.
15 years ago
3125fd5f4f
Add RFCOMM channel configuration parsing and channel states to the incomplete BluetoothHost demo.
...
Add missing BT_* prefix to the Bluetooth stack's channel state enum values.
15 years ago
67bc625109
Split out the RFCOMM Control Channel command processing code into a seperate set of files for clarity.
15 years ago
b522e35965
Rename the incomplete Bluetooth Host demo's ServiceDiscoveryProtocol.c/.h files to SDP.c/.h. Fix compile errors in RFCOMM.c/.h.
15 years ago
637c7b01d0
More RFCOMM layer additions - begin to add multiplexer channel state variables.
15 years ago
931ca42a6e
Minor fixes to demos to add in some missing comments, printf() formatting. Make incomplete Bluetooth demo indicate connections visually via the board LEDs.
15 years ago
e930738247
Add stub RFCOMM command handlers. Move out RFCOMM frame length and data pointer calculations to the master RFCOMM frame reception routine, instead of inside each frame type handler function.
15 years ago
f92229697f
More RFCOMM layer implementation - fix FCS calculation, add in start of control channel command processing.
15 years ago
34e0fed4ca
Make the RFCOMM_SendFrame() function correctly generate frames from the input parameters, change addressing to use the raw DLCI address plus flags.
15 years ago
361e1ec1d8
Refactor out RFCOMM packet send code into a seperate function.
15 years ago
2dabb4e55f
Add the svn:eol-style property onto new files which where missing it to ensure uniform line endings.
15 years ago
efbedcfa54
Document Bluetooth files with overall file Doxygen comments. Add more initial RFCOMM layer code to receive and respond to SABM packets.
15 years ago
fc92f9969c
Minor documentation cleanups.
15 years ago
9293de2491
Start implementation of RFCOMM decoding layer. Add new service initialize routines for each Bluetooth service - currently unused, but will eventually reset the service state of RFCOMM when a new connection is made.
15 years ago
13d812a718
Delay needed in bluetooth code due to the send function not waiting for the pipe bank to become ready before writing. Add in a call to Pipe_WaitUntilReady() to fix the issue.
15 years ago
a405a9bdf8
Extra protocol value in the RFCOMM protocol is the channel number, not the PSM - update typedef name and size.
...
Add delay to the Connection Request signal processing routine - without this, the host will not create the RFCOMM channel correctly. Need to investigate why this delay is needed.
15 years ago
Dean Camera