* Put in my keymaps
* Fixed all but weird lets split issue
* Organized and tried to trobleshoot lets split
* Organized and tried to trobleshoot lets split
* Added bbaserdem keymaps
* Added bbaserdem keymaps
* Fixed stuff
* FIxed a filename error
* Lets split eh
* Finalized things regarding keymap
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
* slight tweaks to xd75 keymap
* update to config.h to remove undef of solenoid active
* code organization for userspace
* updates to userspace and keymaps
* add rgb to userspace and lets split
* add conditional around rgb functions in userpsace
* move rgb layer changes into layer_state_set_user
* Cheers let's split keymap
* fixed typo on norman layer of cheers keymap for let's split
* fixed right handed mappings for home row
* cheers keymap for let's split redefinition
* updated Cheers keymap for let's split
* cheers keymap for let's split updated with some terminal macros
* renamed cheers let's split keymap to a more appropriate normacos
* updated normacos keymap doc / removed non functional keys
* reset let's split rules to default values
* added more spotlight search macros
* normalized keymap comments
* Moved numpad on lower layer
* updated normacos layout and fixed some readme typos
* removed leftover merge diff
* added waits to macros that make use of SEND_STRING
* fixed wrong waits on macros that use SEND_STRING
* normalized macro comments after adding waits
* Put in my keymaps
* Fixed all but weird lets split issue
* Organized and tried to trobleshoot lets split
* Organized and tried to trobleshoot lets split
* Added bbaserdem keymaps
* Added bbaserdem keymaps
* Fixed stuff
* FIxed a filename error
* add not-so-minidox handwire keyboard
* corrected keymap
* multiple adjustments to not_so_minidox keyboard
* remove I2C master left define
* update default layer set function
* move solenoid code into userspace
* minor adjustments to config.h
* update keymaps to utilize userspace
* move features and config to userspace, correct build issue
* correct solenoid pin
* adjust defaults for solenoid pin and enable
* default solenoid to on for not_so_minidox
* disable RGBLIGHT_SLEEP for xd75
* tweaking solenoid enable/disable in userspace and keymaps
* Update default Nyquist revision
* LED slave fix
* Sync changes from lets_split
* Add needed check for debouncing
* Remove line that was setting PD2 pin and interfering with use of that pin
* Add backlight key to keymap
* Adding Rama M10-A Macropad
* ch-ch-ch changes...
* Major overhaul based on SMT's keymap.
* more changes.
* Moved the FKeys to the ADJUST layer.
* More rearranging.
* Alias in Atreus62 keymap to make it more legible
Added config.h to fix tapping_term issue for Caps Lock key in OSX
* Added OrthoDox layout.
* More layout changes.
* Fixing things with the keyboard.
* Finishing touches.
Set left-hand master in config.h
Embedded the arrow keys in keymap.c
* Revised keymap making this easier to use.
* additions and changes.
* changes to various keymaps.
* Minor adjustments to OrthoDox layout.
* Added Eco keymap. Updated Let's Split keymap.
* Added gherkin
* Removed my M10A keymap
* Planck Keymap Updates
Updated my Planck keymap and created a simple keymap for Seph's Preonic.
* Added readme
* readme fixes
* Update readme.md
more clarification
* Keymap Tweaks
Removed the Power button setting from the keymap. It was in a
horrible location. I'll work on getting it setup somewhere else
sometime later.
* Added Readme
I finally got around to adding a readme to this keymap. I've also added minor changes to the layout.
* Fixed Keymap Error
* Fixed Readme
* adding iris and levinson keymaps
* Tweaks to keymap
* added youngJZ keymap
* Changes to keymap
Added a readme.md
* Levinson changes
Added the readme.md and rules.mk files.
Configured RGB underglow and backlighting.
* fixed readme
* changes to keymaps
* Updated keymap
* Updated readme.md
* Updated Readme (again)
* Updated Readme
Fixed formatting. Again.
* Updated readme
This is the last readme update for this keyboard update. I hope.
* Added Contra keymap
* Kinesis Keymap Update
* Updated Keymaps
I've updated my Kinesis (Stapelberg) layout and my Clueboard 66 layout.
I've also updated my Kinesis Readme.
* Clueboard Keymap update
Added media keys to my Clueboard 66 Rev2 layout.
* Added keymap
Added Minidox keymap & rules.
Added user function to Let's Split keymap that turns off the red
LEDs on the Pro Micros.
* New Zen keymap
Added Zen keyboard to my list of keyboards, so had to generate a new
keymap for it.
Also adding some changes to my MiniDox keymap and config.h, as well
as my Levinson's config.h.
The config.h file changes enable ee_hands.
* A few changes for useability
I made a few changes to the Minidox keymap to see if I can't make it more useable.
I'm also working on streamlining the Zen keyboard keymap to reduce layers.
* Re-vamped Iris keymap.
* changes
* minor keymap change
This was a minor keymap change to use mod_tap for the backspace key:
ALT when held, BSPC when tapped.
* Added Fourier keymap
* Keymap Cleanup
Moved KC_ESC to KC_CAPS, and changed KC_ESC to KC_GRV
This is because of muscle memory, I kept hitting ESC when trying to hit TAB.
* Keymap Adjustments
Swapped Caps/Esc, put Caps in Raise/Lower layers, put Grv in normal
Esc position. Adjusted the readme.md to reflect these changes.
* minor tweaks
Added code to disable red ProMicro LEDs after flashing.
* Clean-up
* Corrections to keymap.
Fixed a foul-up in the Zen keymap where the lctrl was where the LOWER
should have been.
* Changes to make this fall in line with the new Layout features
* Moving to LAYOUTs for 4x12 boards
* fixed config.h file
* standardization changes
* Reverted Atreus62 keymap to LAYOUT format
* Switch Preonic and Nyquist to ortho_5x12
* Corrections to config.h
* config.h file tweaks
* config.h file tweaks
* copied lets_slit to splinter
* initial splinter layout
* remove unused keymaps
* implemented second half of the keyboard
* initial definition of tap dance
* the tap dance is working now
tap dance for right hand 4c 2r
hold - shift
single tap - n
double tap - ñ
triple tap - Ñ
* clear the keymap.c
* put the tap state on to array
* the n tilde tap dance should produce right shift if hold
* add esc grv tap dance
* remove the defined SS_LSFT on tap_dance.h
because it was added on the quantum.h
* minor cleanup for the keymap
* use the X_* on tap dance
* added super alt tap dance
* use the NO_TAP on tap dance reset
* allow track what rows and cols pressed
* added the RGUI_ALT
* keymap arrangement
* use i2c
* initial rgb
* layer colors
* initial rgb pressed key
* set the layers led
* SUCCESS!!!
* cleaning
* improve shifted layer
* led brightness
* initial caps rainbow
* rename SET_LED_RGB to SET_LED_RGB_HEX
* clean the SET_LED_RGB_HEX and added SET_LED_RGB
* clean format
* caps lock rainbow
* rename key_led to set_key_led
* caps lock rainbow enhanced
* make varibiables static
* change back the loop max value to 360 for the rainbow
* add scroll lock to the rainbow led
* fix pos calculation of right hand board
* add ative keys and make rainbow color can override by key press
* remove the TOTAL_MATRIX_POINTS
* some improvments for the rgb
* call the rgblight_set on the process_record_user
* some enhancement for the leds
* pass the dim value to set_layer_led and limit the brightness on _VL
set the brightness to 2 if the dim value is less than 2 because
their is not enought power for the leds.
* remove the rgb steps on the config
* use the non rev config
* remove all the revisions
* favor i2c instead of serial and remove all the ref for the serial
* clang formatting
* allow to save to eeprom the brightness value
* add bootloader caterina this will enable soft reset key
* initial commit for the userspace
* added my own keymap for splinter
* first working userspace
* move splinter to handwired keyboards
* handwired splinter default keymap
* move some config to my keymap
* cleanup some headers on the keymap
* move the EECONFIG_RGB_DIM to the user space
* I fix remove the GUI on SPC and ENT
* remove the default include on tap_dance.c
* add lights.c and refactoring
* fix wrong source for led index
* seperate the variable on set_layer_led for readabilty.
* set the usb max power consumption to 50
* fix led lighting
* add new enums for tap dance
* use romeve path avr on eeprom.h
* fix wrong spelling on TP names
* changed the tap dance
* allow to set rainbow on some pressed key
* add reset key
* fix error on matrix.c if ROW2COL is used
* add extraflags -flto
* See e2352d4
* Got no love from i2c, serial to the rescue
* Fix the led will lit up to color red after boot
* Trial if the power can handle yellow color at full
* Add comment
* Use EE_HANDS
* add config.h in the use space
* KC_N on BL should wrap in SFT_T
* See d13567d, put it back but increase 1 level
* Fix led soldering mistake
* set the tapping_term to 100
* Use TT for the changing the layer
* Remove the changing space to enter and vice version on BL and UL
* Increate the tapping term
* Use tap dance on changing layer
* Add assorted layer
* propery way to tapdance
* Remove DA_EGRV
This also fix the wrong placement of the reset and dance lspr should register
the KC_LGUI on finished not unregistered.
* Remove the media control to the up and down layer
* Remove the interrupted state of the tap dance
* swapt the space and enter on to th caps
* Shorthand
* Keymap update
* My keymap for lets_split
* cleaning
* Cheers let's split keymap
* fixed typo on norman layer of cheers keymap for let's split
* fixed right handed mappings for home row
* cheers keymap for let's split redefinition
* updated Cheers keymap for let's split
* cheers keymap for let's split updated with some terminal macros
* renamed cheers let's split keymap to a more appropriate normacos
* updated normacos keymap doc / removed non functional keys
* reset let's split rules to default values
* added more spotlight search macros
* normalized keymap comments
* Moved numpad on lower layer
* mf68_ble did not have the correct .c and .h files
* Fix JC65 KEYMAP to LAYOUT
* Change KEYMAP to LAYOUT for s60_x
* Convert KEYMAP to LAYOUT for lets_split boards
* Convert KEYMAP to LAYOUT
* more fixes to keymap for iris
* convert KEYMAP to LAYOUT for levinson keyboard
* change losinggeneration's KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT for nyquist
* convert KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT for viterbi
* convert KEYMAP to LAYOUT
* convert KEYMAP and its subsidiries to the LAYOUT standard
* convert KEYMAP and its subsidiries to the new LAYOUT standard
* Added cpeters1982 keymap folder in lets_split
* Deleted tap dance. need to research error
* Changed keymap to better facilitate SpaceFn
* Trying to get backlighting to work
* Added RGB backlight support
* cleared some cache files per Drashna's instructions
* initial branch
* lazy-push
* Fix schema
Updated README, readded DVORAK to keymap.
Updated dir name to lowercase.
* removed executable bit
* testing switched L_GUI position
* adding new layout for the planck that helps when coming from the pok3r
* Fixing the function layer
* Update readme.md
* Update keymap.c
Making some small adjustments
* Update keymap.c
switching GUI and Esc
* Update keymap.c
* adding mod tap on left and right shift
* adding mod tap on left and right shift
* poker keymap for lets split
* fixing the FN layer
* removing unused file
* pull fuse settings for bootloader jump
* fix 32a chips
* make automatic bootloader selection optional
* quantify bootloaders
* fixs #164, speeds up dfu reset
* fix for chips w/o usb
* missing an n
* fix bootloader sizes, use words for addresses
* fix bmini, pearl, and [[ issue, make things quiet
* ignore avr errors on arm for now
* update settings for the light
* document bootloader stuff
* add bootloader title
* redo make args to use colons, better folder structuring system [skip ci]
* don't put spaces after statements - hard lessons in makefile development
* fix-up some other rules.mk
* give travis a chance
* reset KEYMAPS variable
* start converting keyboards to new system
* try making all with travis
* redo make args to use colons, better folder structuring system [skip ci]
* don't put spaces after statements - hard lessons in makefile development
* fix-up some other rules.mk
* give travis a chance
* reset KEYMAPS variable
* start converting keyboards to new system
* try making all with travis
* start to update readmes and keyboards
* look in keyboard directories for board.mk
* update visualizer rules
* fix up some other keyboards/keymaps
* fix arm board ld includes
* fix board rules
* fix up remaining keyboards
* reset layout variable
* reset keyboard_layouts
* fix remainging keymaps/boards
* update readmes, docs
* add note to makefile error
* update readmes
* remove planck keymap warnings
* update references and docs
* test out tarvis build stages
* don't use stages for now
* don't use stages for now
Dylan Khor