2d9f98b592
Add multiple axis support to the HID joystick report in the HID_DESCRIPTOR_JOYSTICK() macro.
13 years ago
d0ac8e46f9
Renamed the JTAG_DEBUG_ASSERT() macro to JTAG_ASSERT().
...
Changed the reports in the GenericHID device demos to control the board LEDs, to reduce user confusion over the callback routines.
Fixed swapped TWI_ADDRESS_READ and TWI_ADDRESS_WRITE values.
Fixed TWI_ReadPacket() not releasing the TWI bus on read completion.
13 years ago
40946a5704
Minor documentation corrections.
13 years ago
ccf4cffd78
Improve device support documentation in the manual; split out each architecture into a different sub-page of the Device Support section of the manual, add in table to indicate USB mode support for each microcontroller model.
13 years ago
af725dd418
Fix TWI peripheral driver example code in the library documentation.
13 years ago
9708b45e69
Minor documentation corrections.
13 years ago
fc5fa769ef
Pull out architecture specific macros and other definitions into a new common header file. Add new JTAG_DISABLE() macro for the AVR8s to software-disable JTAG debugging using cycle-safe assembly code.
13 years ago
3478178127
Add shortcuts to SwapEndian_16() and SwapEndian_32() internal functions to improve optimization if called with constant inputs.
13 years ago
ef4cff29c3
Fix TempDataLogger project logging interval always being 500ms more than the requested interval.
13 years ago
c505ba047f
Set HOST_DEVICE_SETTLE_DELAY_MS to zero for the incomplete AndroidAccessoryHost demo to prevent a timeout on the Android device from aborting Accessory mode after a command it sent to switch modes (thanks to Opendous Inc).
13 years ago
ddae47979d
Update LUFAConfig.h with missing options for the AVR32 target.
...
Add Binary Page Mode fuse command bytes to the AT45DB642D.h Dataflash header.
13 years ago
aceb015ea7
Fixed incorrect Dataflash buffer use in the DataflashManager_WriteBlocks_RAM() function of several demos/projects (thanks to Jeremy Willden).
13 years ago
40728fd20d
Remove redundant calls to USB_USBTask() in the Mass Storage Device Class driver when INTERRUPT_CONTROL_ENDPOINT is not used, as this is done inside the stream callbacks.
...
Fix implementations of Endpoint_SetEndpointDirection() and Endpoint_GetEndpointDirection() for the AVR8 architecture.
13 years ago
025742fca8
Added new VTARGET_USE_INTERNAL_REF configuration option to the AVRISP-MKII clone project (thanks to Volker Bosch).
13 years ago
d5e874d348
Add INTERRUPT_CONTROL_ENDPOINT compile time option support for the UC3 devices.
13 years ago
5c274d106b
Fixed USB_USBTask not being called internally in stream transfers between packets when Partial Stream Transfers are used.
...
Remove old unused function prototype in the LowLevel MassStorage device demo.
13 years ago
110711598a
Removed the ENDPOINT_DESCRIPTOR_DIR_* macros in favour of the shorter ENDPOINT_DIR_* macros, which can now be used with both Endpoint_ConfigureEndpoint() and in the device descriptors.
13 years ago
2c404e5af5
Add support for the ORDERED_EP_CONFIG compile time token on the UC3 architecture.
13 years ago
69243c5071
Move out the EP_TYPE_* macros to the base USBController.h header, as these are used in the device descriptors as well and thus must not be changed.
13 years ago
06d3797bac
Fix names of XMEGA ClockManagement driver functions.
...
Remove V2 branch for now, to concentrate on a V1 implementation of the USB XMEGAs before large-scale API alterations.
13 years ago
69ab85cbc0
More USB XMEGA porting for Endpoint control.
13 years ago
0c2ad9eb34
Add missing SVN eol-style property to files where it was missing.
13 years ago
a36012fc4b
Add option to the USB XMEGAs to set the USB bus interrupt priority level.
13 years ago
f07e766755
Complete USB XMEGA interrupt control subsystem code in the core USB driver.
...
Automatically load in the USB calibration bytes from the User Signature Row on start-up.
Create internal SRAM variable for the endpoint control and status register table, used by the XMEGA USB controller hardware.
13 years ago
ffa8b430c1
Complete initial revision of the XMEGA Clock Management platform driver.
...
Start the USB clock source generator inside USB_ResetInterface() for XMEGA devices.
13 years ago
c8e5176465
Add XMEGA to the LUFA core library makefile's list of architectures, so that the XMEGA files are properly cleaned on request.
13 years ago
77a9df36a7
Update UC3 platform driver support to use the bitmasks defined in the header files over raw constants.
...
Start implementation of XMEGA platform drivers.
13 years ago
b971dbbce8
More XMEGA USB AVR device port work - re-add missing Endpoint stream functions, remove unnecessary internal functions.
13 years ago
8629e1918c
Implementation of several key core USB driver functions for the new USB XMEGA devices.
13 years ago
6490d1c443
Correct the maximum banks per endpoint information macros for the UC3A3 and UC3A4 devices.
13 years ago
bc41cbd26d
Add support for triple endpoint/pipe bank AVR32 UC3 devices.
13 years ago
7c3290607e
Add missing ENDPOINT_DETAILS_EP7 macro for the UC3A3/UC3A4 devices.
...
MultiArchDemos: Correct usage of updated INTC_RegisterGroupHandler() in the ported demos.
13 years ago
3f38ea6317
Added Device Qualifier standard descriptor structure definitions USB_StdDescriptor_DeviceQualifier_t and USB_Descriptor_DeviceQualifier_t.
13 years ago
f4528c4aef
Add high speed USB support for the UC3 devices containing a high speed USB controller.
...
Add device support preprocessor checks and use symbolic bit names in the UC3 platform clock management driver.
13 years ago
13951ab043
Fix compile errors in the UC3 platform support due to a forward reference and an incorrect function prototype.
13 years ago
01d269879f
Add new STRINGIFY() and STRINGIFY_EXPANDED() convenience macros.
13 years ago
d9643cf6ec
Add start of an architecture port to the Atmel USB XMEGA devices.
13 years ago
f580232392
Remove unneeded #include of Device.h in StdDescriptors.h breaking compilation for some user projects.
13 years ago
5f51554a5e
Enhance and document the AVR32 UC3 platform drivers.
13 years ago
bd8046976f
Minor documentation fixes.
13 years ago
fdb82cd1e8
Fixed error in the pipe unordered allocation algorithm for the AVR8 devices breaking compatibility with some devices.
13 years ago
04287b76c5
Add more missing function attributes to the TWI peripheral driver.
...
Fix incorrect standard request name in the host standard request driver.
13 years ago
7207b05695
Add missing function attributes.
13 years ago
065ed4da20
Added new USB_Host_GetDeviceStatus() function for USB Host mode.
13 years ago
f152ff26c7
Add missing function attributes to the RingBuffer driver to reduce the chances of invalid usage.
...
Fix duplicated LED driver functions in the Doxygen documentation.
13 years ago
c029d72b94
More endianness porting of the LUFA host mode class drivers.
13 years ago
85e85befc4
More endianness porting of the LUFA device mode class drivers.
...
Add endianness information to the class driver and core structure definitions.
Move out the unused Ethernet_Frame_Info_t structure definition to the RNDIS device demos where it is needed.
13 years ago
7c7778e3ce
Minor style improvements to the incomplete AndroidAccessoryHost demo.
13 years ago
d771b1ff8f
Oops - re-order Ringbuffer.h inline functions to prevent compile errors due to forward references.
13 years ago
87ea060afe
Added new RingBuffer_GetFreeCount() function to the library miscellaneous RingBuffer driver.
13 years ago
Dean Camera