fc92f9969c
Minor documentation cleanups.
15 years ago
9293de2491
Start implementation of RFCOMM decoding layer. Add new service initialize routines for each Bluetooth service - currently unused, but will eventually reset the service state of RFCOMM when a new connection is made.
15 years ago
13d812a718
Delay needed in bluetooth code due to the send function not waiting for the pipe bank to become ready before writing. Add in a call to Pipe_WaitUntilReady() to fix the issue.
15 years ago
a405a9bdf8
Extra protocol value in the RFCOMM protocol is the channel number, not the PSM - update typedef name and size.
...
Add delay to the Connection Request signal processing routine - without this, the host will not create the RFCOMM channel correctly. Need to investigate why this delay is needed.
15 years ago
480da5aab6
Add PSM value to the RFCOMM service so that the host knows what PSM to use on channels when trying to access it.
15 years ago
008e0e2e0a
Add start of RFCOMM service layer to the incomplete BluetoothHost demo.
...
Reduce the size of the attribute search list from 15 ranges to 8 to save RAM.
15 years ago
5144ea76f6
Oops - descriptor pointer should be assigned, not incremented with the new type-safe code.
15 years ago
6d22a00e8b
Better fix to avoid void pointer arithmetic in ConfigDescriptor.h to regain C++ compatibility (thanks to Michael Hennebry).
15 years ago
23a94a7181
Fix byte ordering of UUIDs in the SDP server - host can now successfully pair to the Bluetooth device and discover the exposed Serial Port Profile RFCOMM service.
15 years ago
c362709a1e
The SDP UUID lists should be searched and ALL UUIDs matched for a record to be retrieved, not partial matches. Change the SDP code so that the entire list must be matched against a service attribute table's contents before it is returned.
...
Change matching algorithm so that it recursively searches through the entire attribute table, and not just pre-specified sequence attributes.
Add browse lists and proper descriptions to the Serial Port service.
15 years ago
da51c1f974
Add L2CAP service attribute table. Fix up ProtocolDescriptorList attributes, and add macros for used UUIDs to reduce typing and make the code easier to read.
15 years ago
b98158bd50
Clean up the Service tables, add incomplete ProtocolDescriptorList attribute to the SDP service.
15 years ago
32ab52a298
Remove incorrect Language ID offset attribute from the SDP server - client assumes 0x0100 offset for primary language anyway, and the format of the offset was incorrect anyway.
15 years ago
255d4ef858
Service Attribute SDP requests should have only one Data Element Sequence container around the single service's retrieved attributes, not two.
15 years ago
0902ff9651
Document inline SDP data read/write functions.
15 years ago
3f3fdb01a9
Much faster attribute range lookup - look through short list of attributes and compare to range, rather than looking up by each possible value within the range.
...
Cleanups to SDP code. Add missing RFCOMM language base ID offset attribute. Fix incorrect definition of the SWAPENDIAN_32() macro.
15 years ago
cb52e4371e
Fix the encoding of UUIDs in the SDP server so that they match the Bluetooth UUID format properly.
15 years ago
e0ef5741d4
Move SDP service tables out into a new set of files, to make the SDP service code cleaner.
15 years ago
587f320333
Add Service Attribute request processing to the SDP server code.
15 years ago
e15838d4e2
Fix endianness issues in the Service Discovery Protocol service of the incomplete Bluetooth Host demo. Host can now correctly retrieve specific services, however Windows does not appear to be sending the appropriate generic browse class IDs needed to report the virtual serial service.
15 years ago
f606afefff
Remove void* arithmetic in the USB_GetNextDescriptor() static inline function, to make the header file C++ compatible once again. Implement workaround for an obscure GCC bug which can cause incorrect code generation under some circumstances when the void* is re-cast.
15 years ago
152b2764c3
Small tweaks to ConfigDescriptor.c/.h to ensure pointers use the correct type, and to remove const attribute from the descriptor comparator callback function pointer type define, and into the function prototype instead.
15 years ago
e95c96ea20
Fixed internal device serial not being accessible on the ATMEGAXXU2 AVRs (thanks to Axel Rohde).
15 years ago
328ed71ce7
Fix spacing of the function parameter descriptions in the Doxygen documentation.
15 years ago
c1daecf18b
Fixed incorrect signature for the ATMEGA32U2 in the DFU bootloader (thanks to Axel Rohde).
...
Partial fix to the Bluetooth SDP code - data should be encoded in big endian, not little endian.
15 years ago
3b95b8dedc
Added new VTARGET_REF_VOLTS and VTARGET_SCALE_FACTOR compile time defines to the AVRISP-MKII programmer project to set the VTARGET reference voltage and scale factor.
...
Fixed XPLAINBridge project not correctly reading the XMEGA's supply voltage when reporting back to the host.
15 years ago
8d993afc53
Replace ring buffer library in Benito and USBtoSerial projects with the new lightweight ring buffer header to improve reliability.
15 years ago
885170f5b4
Removed unused line encoding data and control requests from the CDC Bootloader code, to save space.
15 years ago
54e69dbee1
Switch to using the correct intptr_t type use where a pointer must be cast to an integer type.
15 years ago
670413603f
The EEPROM stream read/write functions now use eeprom_update_byte() instead of eeprom_write_byte(), so that only changed bytes are written to EEPROM to preserve its lifespan.
...
Changed over the AVRISP-MKII and TemperatureDataLogger projects to use eeprom_update_byte() when writing non-volatile parameters to EEPROM to preserve its lifespan.
15 years ago
bb9fb1051c
Add better documentation to the Software UART code in the XPLAINBridge project.
15 years ago
1c407b9669
Switch software UART over to timer 1 and remove timer prescaling to try to prevent integer rounding errors and thus minimize the possible error of the UART code.
15 years ago
f64e3db07a
Rename software USART driver globals to make the code more in line with the rest of the XPLAINBridge project.
15 years ago
79742c5d24
Make software USART used in the XPLAINBridge project directly check and store into the ring buffers, rather than polling from the main program loop to avoid added latency.
15 years ago
9b29d1dc50
Create a new LightweightRingBuffer.h header file for the XPLAIN project to abstract out the new ring buffer without a performance penalty.
15 years ago
9c037a952f
The RingBuff library code has been replaced in the XPLAINBridge project with an ultra lightweight buffer to help improve the reliability of the bridge.
15 years ago
4a13a5484a
Fixed RNDISEthernet demos crashing when calculating checksums for Ethernet/TCP packets of more than ~500 bytes due to an overflow in the checksum calculation loop (thanks to Kevin Malec).
...
Removed string Attributes from the Service Discovery Protocol code to minimise the potential points of failure while the base code is being debugged.
15 years ago
8f3d4e69c3
Add UUID Class matching to the Service Discovery Protocol code - SDP is now correctly matched against the generic Service Discovery Class UUID.
15 years ago
776485a6c5
Remove obsolete entry from the Doxygen configuration files.
15 years ago
8cdb141eed
SDP Service improvements; fixed UUID for SDP service, added Service Discovery Server UUID, better documentation.
15 years ago
a20a9086f7
Add comments and partial Doxygen documentation to the incomplete Bluetooth SDP handler code.
15 years ago
58a0ee67a3
Oops - when adding a sequence header to the SDP response, the size value needs to be cleared, not the buffer pointer.
15 years ago
92bebc457f
Add incomplete code to properly handle attribute responses to Service Discovery Protocol requests.
15 years ago
83b5c916c6
Service Discovery ServiceSearchAttribute requests require the response to be grouped by UUID, so the response can't be generated as the attributes are read in. Buffer both UUIDs and Attributes instead and generate the response afterwards.
15 years ago
3e515cdfa8
Short UUIDs are measured in bytes, not bits -- update Service Discovery Protocol code so that it can now correctly match against UUIDs in the service table.
15 years ago
141d94fa98
More SDP code improvements - responses to ServiceSearchAttribute service discovery requests should now be valid, even if they do not currently return the device's services and service attributes.
...
Added more documentation to the incomplete Bluetooth stack code.
15 years ago
a883cf65dc
Renamed CDC device class demos' ManagementEndpoint descriptor to NotificationEndpoint to more accurately indicate its purpose.
15 years ago
78600e2485
Switch over the BluetoothHost demo's Service Discovery code to pass around more generic GUID arrays.
15 years ago
d3699d0261
Added new ADC_DisableChannel() function (thanks to Mich Davis).
15 years ago
f13bc35a19
Begin processing code for Service Discovery Protocol attributes.
15 years ago
Dean Camera