4615f2c740
Tweak product strings again
9 years ago
6886ccd2d4
Tweak device descriptor strings
9 years ago
59ae1cb45c
Revert "Initial commit of ST Cube HID drivers"
...
This reverts commit 08068c25d4
9 years ago
08068c25d4
Initial commit of ST Cube HID drivers
9 years ago
8df2be05af
Update Readme to point to the wiki
9 years ago
90e236561d
Increase Downstream's host command timeout to 5 seconds. It turns out
...
some flash drives can take up to 2 seconds to write a single block.
9 years ago
b9c1b23e4b
Supported device classes that fail sanity checks are now reported with a
...
slow 'unsupported device' flash, rather than a fast 'freakout' flash.
9 years ago
0d2d4d6341
Implement flash write lockout by spamming the unlock register, then
...
checking that the correct unlock sequence fails.
9 years ago
9d966d4e89
Tidy up misc files and settings
9 years ago
e94aea019e
Moved OpenOCD config to its own folder
9 years ago
e308d3350b
USG v1.0 beta WORKS!!!!!11
...
So apparently the STM32F401's SPI DMA is even more buggy than the 405's.
Worked around an intermittent stall/timeout by busy-waiting Upstream's
packet length transmission and reception, instead of DMA-ing it like the
packet body. Ugh...
9 years ago
25ff531917
Tweaks to 1.0 firmware. Not completely working yet :(
9 years ago
e29ef84861
Modify firmware for v1.0 hardware with STM32F401RC micro:
...
- Processor-specific header
- Startup file
- Linker script
- Project settings
- Debugger config script
- Debugger project settings
- Board revision detection routines
9 years ago
41605ab0d5
Added BOM with Digikey part numbers, and a cool part-combinater-o-tron
...
macro.
Also zipped the gerbers.
9 years ago
64b823980b
Hardware v1.0 beta complete, ready for fabrication
9 years ago
9256c7e27d
Initial commit of v1.0 hardware. Schematic done, layout in progress.
9 years ago
1262c5337a
All tabs to spaces
9 years ago
08e6846cc5
Add missing option to clock configuration
9 years ago
21de622469
Added hardware check on bootup: fault LED will light if Upstream
...
firmware is placed on Downstream hardware or vice versa.
9 years ago
2983da24b2
Changed Upstream and Downstream SPI transfers back to DMA. DMA works
...
correctly now, either because SPI is in 16-bit mode, or because I found
all the other bugs!
Doubled SPI baudrate to 10.5Mbps. Transfer speed now limited (again) by
Downstream's lack of FIFO buffering in the USB host controller.
Also disabled DMA transaction half-complete interrupt in
stm32f4xx_hal_dma.c, as it wasn't doing anything useful.
9 years ago
cd663a0651
Two bugfixes for Upstream's SPI packet handling:
...
- Use asynchronous free packet callback for Upstream_MSC_BeginRead
- Upstream_MSC_BeginWrite freed packet too early
9 years ago
d643fbdf87
Previous commit missed an unsupported-device-flash-LED check.
...
NOTE: Downstream's full-speed host controller is flakey when connecting
to low-speed devices. One mouse enumerates on only 50% of connection
events, while another mouse enumerates on 90% of connections. Grrr.
9 years ago
226e163adf
Improve Downstream error handling:
...
- Slow flash fault LED when unsupported device connected
- Disconnect downstream USB host on error
9 years ago
3eb95c683c
Add images for wiki.
9 years ago
5e85aa069d
Remove generated files from Upstream/Debug/ folder
9 years ago
431a527e24
Tidy up commented DMA init code
9 years ago
dda307dbe5
Readme!
9 years ago
58308c4a89
Added Mozilla Public License information to file headers.
...
Mozilla Public License v2.0 is compatible with the various licenses used
by ST and ARM.
9 years ago
2e3293e84f
Increase SPI interface speed 4x, to 5.25Mbps. Required modifications to
...
SPI peripheral library. At this speed SPI requires ~60% CPU time at -Og
optimisation level. This could be further improved by trimming down the
SPI interrupt. But...
Speed is now limited by Downstream's single-packet-per-URB restriction,
to about 460kB/s. USB Middleware does not implement TX FIFO empty
interrupt, so a bit of work is required here.
9 years ago
5cd9ddbd98
Merge branch 'MassiveDebug'
9 years ago
08c8c7a6d6
Code tidyup - remove unused SPI Tx-only and Rx-only routines
9 years ago
d48815d8d9
IT. WORKS. !!!!!!!
9 years ago
ce03845623
Completed moving Upstream to interrupt-based SPI.
...
Although I am not entirely convinced this is necessary, as the SPI data
stall issue only appeared with optimisation off (-O0). Perhaps re-visit
this if Upstream needs more free CPU time later...
9 years ago
b9cc31d036
Crazy hardware issues, about to revert Upstream SPI from DMA to
...
interrupt transfers
9 years ago
48a6c2e2a4
Bugfixes for Downstream, including one in the USB host stack!
...
Downstream now enumerates and accepts attached USB storage devices.
9 years ago
750c2f3a21
- Implement notification of Downstream USB device removal, and
...
corresponding Upstream disconnection
- Improve Upstream handling of TxOk signal from Downstream
- Misc tweaks
9 years ago
f24714cd8c
Revisit Upstream project to:
...
- Implement Upstream state machine, with Downstream-dependent device
emulation
- Add fault LED flashing
- Improve fault handling and freakouts
- Misc bug fixes
9 years ago
fc522bae0a
Added priority elevation to Downstream USB host processing code that
...
interacts with SPI.
It elevates to USB_OTG priority to avoid preemption by SPI, DMA, or USB
interrupts thus avoiding synchronisation issues between USB host stack
and SPI interface.
Also minor improvements to Downstream error handling.
9 years ago
c1b2c191c4
Improved Downstream error handling:
...
- More sensible handling of error cases on SPI interface
- Improved Freakout macros
- Implemented automatic fault LED blinking
9 years ago
0e1fed6047
Full implementation of Downstream MSC interface, including significant
...
modifications to USB host MSC.
Also, minor tweaks to Upstream.
9 years ago
b9b6123642
Commit of Downstream before diving into USB MSC class driver
...
modifications.
Also correct project settings to compile for Cortex M4 architecture.
9 years ago
674cb621a7
Initial implementation of Downstream SPI interface and state machine.
9 years ago
b271e038a3
More refactoring in Upstream project
9 years ago
4350666330
Refactor a bunch of stuff in Upstream project to avoid endless confusion
...
with Downstream project.
Also fixed a couple of things in upstream_spi.c and
upstream_interface_msc.c but due to file rename the diff is not
obvious...
9 years ago
7b4e4b3c14
Continued polishing work on Downstream project.
9 years ago
503d79de56
Streamlining Downstream project
9 years ago
55c8a21aad
Initial commit of Downstream template project.
9 years ago
8f41552214
Updated STM32 library from v1.4.0 to v1.7.0
...
Significant changes to:
- stm32f4xx_hal_spi.c
- stm32f4xx_hal_gpio.c
- stm32f4xx_ll_usb.c
- usbd_core.c
- usbd_ctrlreq.c
9 years ago
18e2218280
Fixed Eclipse's Debug and Release configurations
9 years ago
69d1490faa
Upstream debugged and working again, emulating a 128MB storage device.
...
Implemented mock downstream_interface_msc.c for debugging purposes.
Multiple bugfixes and tweaks to:
- downstream_interface_msc.c
- downstream_spi.c
- usbd_core.c
- usbd_msc.c
- usbd_msc_scsi.c
- stm32f4xx_hal_pcd.c
9 years ago
Robert Fisk