e707fb9472
Increase mass storage reliability on Win10
5 years ago
9f8e90fcc2
Correctly ignore bogus suspend messages on device reconnect
5 years ago
3d5127784d
Fix LED includes
5 years ago
bbad577d43
Implement read/write indication on the fault LEDs
...
Conflicts:
Downstream/Inc/build_config.h
Downstream/Src/downstream_msc.c
Downstream/Src/led.c
Upstream/Inc/build_config.h
Upstream/Src/led.c
5 years ago
828db8e415
Wait for phantom Connect interrupts to finish before completing
...
Disconnect processing
Conflicts:
Downstream/Middlewares/ST/STM32_USB_Host_Library/Core/Src/usbh_core.c
5 years ago
0b75f7d1c6
(add forgotten files)
...
Conflicts:
Upstream/Src/upstream_statemachine.c
5 years ago
34bfe421b5
Poll mass storage for disconnection while suspended - fix for Windows
...
'safely remove' function.
5 years ago
92d29f0901
Correctly handle reads/writes after stop command issued.
...
Also correctly report device disconnection if Upstream polls too slowly.
Conflicts:
Downstream/Src/downstream_statemachine.c
Upstream/Middlewares/ST/STM32_USB_Device_Library/Class/MSC/Src/usbd_msc_scsi.c
5 years ago
1147d2ebf9
Implemented Stop/Eject command passthrough
...
Conflicts:
Downstream/.cproject
Downstream/Inc/downstream_interface_def.h
Downstream/Middlewares/ST/STM32_USB_Host_Library/Class/MSC/Src/usbh_msc.c
Downstream/Middlewares/ST/STM32_USB_Host_Library/Class/MSC/Src/usbh_msc_scsi.c
Downstream/Src/downstream_msc.c
Upstream/Inc/upstream_interface_def.h
Upstream/Inc/upstream_msc.h
Upstream/Middlewares/ST/STM32_USB_Device_Library/Class/MSC/Src/usbd_msc_scsi.c
Upstream/Src/upstream_msc.c
5 years ago
1ea38b2150
Delay GetMaxLUN command by 100ms.
...
Conflicts:
Downstream/Middlewares/ST/STM32_USB_Host_Library/Class/MSC/Src/usbh_msc.c
5 years ago
f0fcead718
Don't spam device while waiting for MSC unit ready
...
Conflicts:
Downstream/Middlewares/ST/STM32_USB_Host_Library/Class/MSC/Src/usbh_msc.c
5 years ago
23e0214d52
Retry control requests for slow flash drives
...
Conflicts:
Downstream/Middlewares/ST/STM32_USB_Host_Library/Core/Src/usbh_ctlreq.c
5 years ago
ee32fe7fdc
Update README.md
6 years ago
45cab8485c
Fix project settings for .bin file generation
6 years ago
ac0f199e56
Ignore Hardware folder
6 years ago
ee148998b9
Create .bin file in post-build project setting
6 years ago
1b0b99ebbd
Sanity-check Upstream MSC parameters received from Downstream
6 years ago
086158525b
Ignore mass storage commands after receiving SCSI stop/eject
7 years ago
8f1d3d9a72
Don't overwrite array bounds when mass storage device reports > 2 LUNs
7 years ago
0c7cc00c0a
HID bot detect: 3 temporary lockouts = permanent lockout
7 years ago
1f365434f9
Dont freak out if we get two suspend events in a row
7 years ago
3276449378
Tweak HID protocol defines
7 years ago
e890e9df7a
Disconnect on SCSI eject command from host
7 years ago
190a601f85
Increase JTAG reliability - hold reset active while connecting
7 years ago
c06a875050
Eclipse launch configurations changed for some reason
7 years ago
c34e0eec59
Fix for mechanical keyboards sending > 8 byte packets
7 years ago
3e68c42e45
Fixed eclipse project settings & debug configurations
7 years ago
88d4cd6ca3
Allow longer constant-speed motion before blocking
7 years ago
e780948ff2
Tweak bot detect parameter
7 years ago
e4fe983da5
Jump detection now measures entire length of movement, not just the
...
proportion above the jump velocity threshold.
Also tweaked constant acceleration parameters.
7 years ago
418bba1706
Constant acceleration detector now blocks mouse movement well before
...
causing a full lockout
7 years ago
f1bb58e8c2
Maintain constant acceleration counter for several seconds, on the
...
assumption that a mouse bot would wait until the human stops using the
mouse before starting to do anything bad.
7 years ago
d7f66cd393
Better support for multi-interface HID: Logitech unifying receivers
...
- Select mouse interface first
- Correctly specify active interface when retrieving HID descriptors
7 years ago
c55b525c41
Support HID mouse reports with an ID header (Lenovo)
7 years ago
8403c9ee93
Restore jiggle detection.
...
This is no longer taken care of by the constant acceleration detector,
so we need to do it explicitly
7 years ago
d6f66e67bd
Reset mouse velocity history on each movement
7 years ago
3d91aa2115
Implement random-movement credit in the constant acceleration detector.
...
This makes it more forgiving of constant acceleration mid-movement, if
the beginning of the movement looks random. Handy for mice that for some
reason generate bot-like constant velocities.
7 years ago
7e4af61910
Tweak keyboard lockout threshold
7 years ago
7638e39f67
Mouse botdetect config comments
7 years ago
0c3c3a033c
Remove jiggle detector as the constant-acceleration detector already
...
does the same job.
7 years ago
84bd03b539
Implemented jiggle detection
7 years ago
8c6d54d110
Tweaks to mouse jump detection
7 years ago
b052645faa
Mouse jump detection implmented
7 years ago
324f115476
Implement mouse acceleration pulse timing. Doesn't work on realistic
...
inputs.
7 years ago
0baf8ea52b
Extend 'fast' key histogram out to 300ms
7 years ago
2deea5a646
Added error band comparison to velocity matching
7 years ago
f7b7ce84e7
Initial implementation of mouse bot detection
7 years ago
302bca3690
Re-implement keyboard bot detection based on timing histograms, rather
...
than maximum typing speed.
7 years ago
441caf6768
Tweaks to HID keyboard bot detection
7 years ago
fa00fd95dd
HID BotDetect functionality debugged and working:
...
- Implement advanced LED flash support
- Tweak HAL_SPI_TransmitReceive to tolerate a longer SysTick interrupt
- Tune KEYBOARD_BOTDETECT parameters
- L-shift and R-shift are now high-speed alphanumeric keys
7 years ago
Robert Fisk