3d6deb9bdf
Simplify manage_heater
...
- Make separate get_pid_output(e) and get_pid_output_bed() function
- Reduce size of manage_heater function
- Hopefully work around linker errors
10 years ago
2f3c77b751
Fix decimal places in G29 Bed Equation Coeficients
10 years ago
196db5720e
Merge pull request #1598 from thinkyhead/temp_errors
...
Fix missing temp_error declarations
11 years ago
e3ca9137b5
Fix missing temp_error declarations
...
- Fix for #1591 replacing #1595
11 years ago
e4d77a6313
Merge pull request #1554 from 2PrintBeta/Development
...
Macro indirection for stepper drivers + Support for TMC26X and L6470 Stepper Drivers
11 years ago
c0b6075f77
Fix max acceleration limits in planner
...
The max acceleration limiting was in wrong place.
11 years ago
c7067edddf
initial empty change log
11 years ago
9157cbd8f3
Add Travel Acceleration and change the M204 options
...
Added option to set Travel Acceleration (non printing moves).
The M204 options was a non sense (S for printing moves and T for retract
moves).
It has been changed to:
P = Printing moves
R = Retract only (no X, Y, Z) moves
T = Travel (non
printing) moves
I will add this info o G-Code wiki in reprap.org. I also advise to put
this info in Marlin next version changelog.
11 years ago
888cf161bd
fix travel speed option for G29
...
I forgot to enclousure the variable with #ifdef
11 years ago
af63b54562
Add travel speed option to G29 command line
11 years ago
749e5b9b84
updated milestone link
11 years ago
33fe89f539
removed irc archive link
...
removed the link as the software i had did not work, nor does anyone hardly use irc chat but just hang out there
11 years ago
5bf42066fa
Fix typo in configuration.h
11 years ago
8a4b62d081
Set more regular setup in configuration.h
11 years ago
60ceca1bc1
Add speed configuration for home-bumping movement
11 years ago
d813090d90
Merge remote-tracking branch 'remotes/upstream/Development' into Development
...
Conflicts:
Marlin/Marlin_main.cpp
Marlin/stepper.cpp
11 years ago
c321c97f35
Merge pull request #1584 from galexander1/stringcleanup
...
fix a handful of cases where strtod() was cast to int, instead of just using strtol()
11 years ago
0eae9c24bc
Merge pull request #1582 from galexander1/deltaconftypo
...
fix typo in delta example config introduced in commit 697ee2d
11 years ago
624f23f550
Merge pull request #1575 from Wurstnase/fix-controllerFan
...
Fix controller fan
11 years ago
b9dfa5cad4
use code_value_long() instead of (int)code_value()
11 years ago
901b03d020
use strtol() instead of strtod() when an integer value is desired
11 years ago
4fba7b084f
fix typo in delta example config introduced in
...
commit 697ee2dc50
11 years ago
a5342c942e
Update Marlin_main.cpp
11 years ago
9dccd3a94f
Merge pull request #1579 from thinkyhead/fix_abl_issues
...
More sanity-checking for ABL
11 years ago
d085725c86
More sanity-checking for ABL
...
- Moved sanity-checks to Marlin_main.cpp
- Applied to other configuration files
- Fixed formatting of ABL output
- Passing verbose level to probe_pt
- Miscellaneous cleanup
- Put CONFIG_STEPPERS_TOSHIBA into Configuration.h
11 years ago
ca4b36deda
Merge pull request #1578 from thinkyhead/require_lcd_style
...
Make sure a ROM is selected for ULTRA_LCD
11 years ago
9eed8c8cf0
Make sure a ROM is selected for ULTRA_LCD
11 years ago
254970c92a
Merge pull request #1570 from C-o-r-E/escape_fix
...
Fixes gCode handling of comments and escaped characters
11 years ago
d3660d22ae
Merge pull request #1577 from thinkyhead/fix_gcode_g29
...
Fix compile error in gcode_G29
11 years ago
25dc79f124
Remove M48 credits also
11 years ago
34e51f576f
Fix compile error in gcode_G29
...
- A redo of #1576 , which missed topo_flag
- Always set verbose_level
11 years ago
bbeb1117d4
Merge pull request #1572 from Wackerbarth/Issue1572
...
Minor typos in the README
11 years ago
344a12bd10
Merge pull request #1571 from AnHardt/Undubble
...
Undubble MSG_MIN & MSG MAX
11 years ago
62bd734612
fix controllerFan() for inverted enable pins
...
add ```^ !(n_ENABLE_ON)``` for each stepper
11 years ago
fd9beb1672
Minor typos in the README
11 years ago
3024f6c706
Undubble MSG_MIN &MSG MAX
11 years ago
ba27f90e36
Merge pull request #1 from foosel/C-o-r-E-escape_fix
...
In-line comments and escaping fixed by foosel
11 years ago
63b62d8d4e
Fixed in-line comments and escaping
...
* "G1 X1 ; test" was not executing "G1 X1" due to never leaving comment mode.
* "M117 Hello \;)" printed "Hello \" to the display due to not replacing serial_char properly.
Tested with the following commands:
* M117 Hello ; test => displays "Hello" on display, ignores "test"
* G1 X1 ; foo => moves 1mm in X, ignores "foo"
* ; test => completely ignored, not even acknowledged
* M117 Hello \;) => displays "Hello ;)" on display
* M117 Hello \\;) => displays "Hello \" on display, ignores ")"
11 years ago
99fb1bc3e8
Attempt to resolve #1568 and add basic escape character support
11 years ago
92ebb7f4c8
Merge pull request #1 from MarlinFirmware/Development
...
dev pull
11 years ago
273d00353f
Merge pull request #1565 from thinkyhead/gcode_handler_functions
...
Gcode handlers to inline functions
11 years ago
cdc38aa783
Move gcode handlers into inline functions
11 years ago
94fd8c7555
Merge pull request #1556 from thinkyhead/enhanced_g29
...
Enhanced G29
11 years ago
6d9e9a6bef
Merge branch 'Development' into enhanced_g29
...
Latest upstream changes
11 years ago
4db2179f5c
Include 4th extruder support
11 years ago
0e074d4050
Merge pull request #1561 from OhmEye/Development
...
Fix autoretract
11 years ago
f90a947e65
Fix autoretract
...
Autoretract was broken, looks like it was overlooked when the retracted flag was updated for multi extruders.
11 years ago
2ef6b3d57a
Fix wrong defines, broken syntax
11 years ago
f3f04e9fd6
Merge pull request #1 from MarlinFirmware/Development
...
Sync with upstream
11 years ago
08b722b635
Merge pull request #1555 from C-o-r-E/solenoids
...
Add support for solenoid articulated extruders
11 years ago
Scott Lahteine