80a0f935a1
Fix G10-G11 by adding a synchronize
...
Based on #7792 by @tcm0116
7 years ago
7f8ff0a724
Show leveling status on character LCD
7 years ago
723a34d9c7
Add confirmation to Init EEPROM command
7 years ago
2efd5b119d
Add USER_SCRIPT_RETURN option
7 years ago
b105e47cb5
Move SERVO0 pin on GT2560 A+ with BLTOUCH enabled
...
Based on #7769
7 years ago
41dcbe89dd
Fixed ST7920_DELAY typo
...
Fixed typo where ST7920_DELAY_2 was being #defined after a check for #ifndef ST7920_DELAY_3
7 years ago
70a64355f6
Fixed LCD_FOR_MELZI SanityCheck
...
Sanity Check for LCD_FOR_MELZI would fail with "Please select no more than one LCD controller option" any time #define LCD_FOR_MELZI was enabled in Configuration.h, even if there were no other LCD options enabled.
7 years ago
e37a1ded0d
Increase BABYSTEP_MULTIPLICATOR to 100
...
Ideally, it should be calculated based on Z steps per unit so that each
babystep corresponds to around 0.025mm. Smaller than this is largely
insignificant for typical layer heights.
7 years ago
3e28243076
No need for LCD_PINS_Dn when unused
7 years ago
bbb94b8f68
babystepping tweak
7 years ago
a277b43e30
Fix babystep menu display
7 years ago
8a994fb1b1
Fix encoder pulses for G3D_PANEL
7 years ago
ac2ac99e15
Fix bad logic in autostart
...
As pointed out by @marcio-ao in #7638
7 years ago
c1cc79176c
Full-featured Creality configs
7 years ago
f25dccd6d1
Disable BABYSTEP_XY by default in all configs
7 years ago
cd09a83cfa
Add size note to SDSORT_LIMIT
7 years ago
9bbc2df217
General code cleanup, spacing
7 years ago
74d430cb97
matrix names update ( #7697 )
...
* matrix names update
* symplified names
* new angle normalization
* ABC
* axis
* least squares
* recalc_delta_settings
* endstop_adj
* 0p
* bug
7 years ago
9d4d53e2fd
Update links to old wiki page
7 years ago
00896f1713
Fix LEVEL_BED_CORNERS (No leveling required)
7 years ago
c3a9e95a5f
Define drawmenu items once, in ultralcd.cpp
7 years ago
0afd25a010
Fix caselight compile issues
7 years ago
386b74f8c2
Merge pull request #7593 from marcio-ao/bugfix-1.1.x
...
Added option for graphical overlay for Z-offset (Resubmission of #7350 and #7586 )
7 years ago
2a963fb5d1
UBL LCD Bugfixes ( #7598 )
7 years ago
d69c5317df
Added option for graphical overlay for Z-offset
7 years ago
367e1b54ba
Merge pull request #7591 from thinkyhead/bf1_misc_patches
...
M111: no args reports current flags
7 years ago
8a184a526a
Marlin: Patch G33, allow M111 to give status
7 years ago
353c23b16e
Enforce BED_CENTER_AT_0_0 on Delta, SCARA
7 years ago
898f48e331
CNC workspace planes for G5
...
According to LinuxCNC, G5 should throw an error if the current plane mode isn't XY.
7 years ago
5851c2d36f
MAX7219 followup ( #7564 )
...
* Add MAX7219_DEBUG to Travis CI testing
* Tweak config and use standard pin naming for MAX7219_DEBUG
* MAX7219: Apply coding standards, use macros, etc.
* Make code work...
7 years ago
52073f21c5
Merge pull request #7556 from thinkyhead/bf1_slovak_language
...
Slovak UTF-8 translation
7 years ago
321f98f867
Fix servo delay in Folgertech config
7 years ago
36771e9492
Fixes required for Creality CR-10
7 years ago
3f0b38ed5d
Add Max7219 LED Matrix Debug Support ( #7563 )
...
* Add Max7219 LED Matrix Debug Support
The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.
The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.
* Try to keep Makefile up to date.
7 years ago
0067bb2840
Addressing #7552
...
When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged.
This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.
7 years ago
2b12093589
Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben
...
New feature: Part-Cooling Fan Multiplexer
7 years ago
54d48130f3
Slovak UTF-8 translation
...
Slovak UTF-8 translation
7 years ago
86c024ce98
Organize, document pins.h include lines
7 years ago
c7b07d20f2
Minor patches to pins files
7 years ago
356af7dcb0
Tweak Sanguinololu-related pins files
7 years ago
11a724d8fc
Sanguinololu example configuration
7 years ago
e337df2e98
Miscellaneous tweaks to serial outputs, code cleanups
7 years ago
c0409b85e7
New feature: Part-Cooling Fan Multiplexer
7 years ago
e82e9073d6
Merge pull request #7530 from GMagician/Code-reduction
...
Code reduction with some configurations
7 years ago
6127154af3
Fix identation by tab
...
There was a tab instead of spaces
7 years ago
b94a1c6b9f
Code reduction this some configurations
...
When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call
7 years ago
405a2132f3
#7529 compile fix
...
I made an error in previous fix
7 years ago
869d7f3703
#7504 missing part
...
#7504 integration has missed this part.
When more than 1 servo is used with bltouch it's impossible to predefine default servo delay for it.
In my original fix I completely removed this part but maybe this is a better compromise
7 years ago
101ba70517
Merge pull request #7505 from thinkyhead/bf1_anet_1_pio
...
Add Anet 1.0 to Platformio.ini
7 years ago
4817b39d98
Added new feature for AutoParking Extruder (APE)
7 years ago
Scott Lahteine