8bf07684d2
Merge pull request #5256 from AnHardt/e-interrupts-2
...
Endstop interrupt refinement
9 years ago
88b38eafd8
Endstop interrupt refinement
...
At the start of a move, check if the endstops are already triggered.
The 'change' interrupts will not see a change if already triggered.
9 years ago
79c8591192
Merge pull request #5253 from thinkyhead/rc_smooth_move_ex-lax
...
Ensure smooth print moves even with LCD enabled
9 years ago
0215cacb30
Merge pull request #5247 from esenapaj/Re-follow-the-PR-#4634
...
Re-follow the PR #4634 (Set language display charset in language.h)
9 years ago
2cc32d85a3
Adjust ENSURE_SMOOTH_MOVES coding style
9 years ago
072541f286
Update ENSURE_SMOOTH_MOVES in all configs
9 years ago
de89dc9f04
Ensure smooth print moves even with LCD enabled
...
lcd_update can take so much time that the block buffer gets drained if
there are only short segments. This leads to jerky printer movements for
example in circles and a bad print quality.
This change implements a simple check: Only if the block currently
executed is long enough, run lcd_update.
This also means the printer will not show actual values on the LCD nor
will it respond to buttons pressed. A option that keeps the menu
accessible is also available.
Aditionaly, slow down if a block would be so fast that adding a new
block to the buffer would take more time. In this case, the buffer would
drain until it's empty in worst case.
9 years ago
7b95918e84
Merge pull request #5251 from thinkyhead/rc_cmake_support
...
Added CMake support
9 years ago
87b6b19256
Patch CASE_LIGHT typo
9 years ago
0be6167f14
Merge pull request #5250 from CONSULitAS/RCBugFix_K8200_backinsync_2016-11-18
...
K8200: Example configuration back in sync
9 years ago
de3eea920d
Merge pull request #5252 from thinkyhead/rc_endstop_interrupt_followup
...
Endstop interrupts followup
9 years ago
eb714ee873
Move dummy thermistor opts, fix redundant sensor comment
9 years ago
7a99c6ce4f
Reformat temp sensor listing
9 years ago
181cdb3cfe
Move GCode list above include lines
9 years ago
25d0c167bd
More detailed static_assert messages
9 years ago
eb120e518c
Followup to new endstop interrupts feature
...
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
9 years ago
832fe284b4
Merge pull request #5184 from AnHardt/endstop_interrupts
...
Introduce endstop interrupts
9 years ago
f579ec2e7a
Added CMake support
9 years ago
cbae44df64
K8200: Example configuration back in sync
...
Configuration.h: back in sync, new features configured
Configuration_adv.h: back in sync, new features configured
README.md: text updated
9 years ago
5db3738fe7
Re-follow the PR #4634 (Set language display charset in language.h)
9 years ago
32247c1b80
Merge pull request #5244 from thinkyhead/rc_danish_nov_2016
...
Update to Danish language 10/11-2016
9 years ago
6eb6f12c64
Patch up some language formatting
9 years ago
8cffa60cc5
Update to Danish language 10/11-2016
9 years ago
d08867986e
Add autotemp capabilities to M104
...
This allows M104 to pass the F and B parameters to enable autotemp as well
9 years ago
c11b2bb777
Bugfix LIN_ADV
...
Advance has nothing todo with Z_AXIS, strange copy&paste error?
9 years ago
ee0765e872
Merge pull request #5233 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
9 years ago
2330619da0
Merge pull request #5191 from petrzjunior/const
...
Replace const bool with #define for consistency
9 years ago
b278b7a395
Update Japanese translation
...
Only adjust spacing
10 years ago
d7ce5d271b
Replace const bool with #define for consistency
10 years ago
d63230d73e
Merge pull request #5192 from Kaibob2/patch-7
...
Printer Stats / Completed prints line doesn't fit in display (when german)
10 years ago
548b45026d
Merge pull request #5214 from Sebastianv650/RCBugFix_planner_opt
...
Save some cycle inside the planner
10 years ago
5d23e52d75
Merge pull request #5228 from thinkyhead/rc_keep_last_mix
...
Fix DIRECT_MIXING_IN_G1 to preserve the previous mix
10 years ago
db47aa983d
Merge pull request #5226 from mtowara/RCBugFix
...
bump -std in Makefile to c++11
10 years ago
99b0c1fe56
Fix DIRECT_MIXING_IN_G1 to preserve the previous mix
10 years ago
a0aad8d686
Merge pull request #5224 from thinkyhead/rc_limit_G30_xy
...
Fix G30 with limits, print correct probe XY
10 years ago
23a675f621
reduce binary size of .hex
...
still a few bytes bigger than with arduino but nothing major
10 years ago
5b6e2cecf5
bump c/c++ standard to gnu11
...
needed for constexpr
10 years ago
410657b050
Fix G30 with limits, print correct probe XY
10 years ago
f3eee02596
Introduce endstop interrupts
...
If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines
for all used endstop pins. If this worked without errors, `endstops.update()` is called
only if one of the endstops changed its state.
The new interrupt routines do not really check the endstops and react upon them. All what they
do, is to set a flag if it makes sense to call the endstop test we are used to.
This can be used on:
* ARM (DUE) based boards - all pins can raise interrupts,
* RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts,
* RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough,
* all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose.
10 years ago
e3ffb58fbd
Save some cycle inside the planner
...
planner.h:
fan speed is used to set integer variables, so no need for long.
Basicaly a byte should be enough for all the fan things, as it's 0-255?
planner.cpp:
Save some float multiplications.
We could squeeze out even more by defining feedrate_percentage,
saved_feedrate_percentage and flow_percentage as float instead of int.
Everytime they are used in the time-critical planner, they are casted to
float and multiplied by 0.01. Not done jet, as they are used in LCD menu
functions I don't know well enough.
10 years ago
665b7f3893
Merge pull request #5212 from thinkyhead/rc_mixing_faster
...
Store mix factors as reciprocals and multiply
10 years ago
60cc9342a4
Merge pull request #5188 from thinkyhead/rc_extended_host_support
...
Extended host support: M155 Auto temp report, M115 capabilities
10 years ago
f663220e87
Store Mix factors as reciprocals and multiply
10 years ago
ea3c08d249
Merge pull request #5186 from esenapaj/Follow-up-the-PR-#5167-etc
...
Follow up the PR #5167 (Add Turkish Language) again, etc
10 years ago
c488378532
Merge pull request #5205 from Sebastianv650/RCBugFix_stepperpatch
...
Remove useless line from stepper ISR
10 years ago
7972378828
Merge pull request #5209 from floyd871/RCBugFix
...
Megatronics 3.0 has no SD-Card detect
10 years ago
8bdf303da0
Update pins_MEGATRONICS_3.h
10 years ago
3890366c83
Update pins.h
10 years ago
c0d45ca7f2
Update boards.h
10 years ago
cdc18f8c22
Remove useless line from stepper ISR
...
The flag is already set inside planner.get_current_block(). Doing it
twice isn't making it better..
10 years ago
Scott Lahteine