03ee87b35a
Fix up the incomplete Webserver project so that it integrates with the uIP stack correctly. Add simple HTTP webserver as a placeholder until FatFS can be integrated.
...
Begin to look into the RNDIS Host Class Driver, which seems to crash on test hardware after many packets have been received.
15 years ago
41ad6bd6d7
New revision Benito hardware will be 16MHz, and use the ATMEGA32U2. Change makefile to suit.
15 years ago
36dec204f1
Update Benito project -- device should be reset when DTR is *asserted* not deasserted.
15 years ago
5a4197a91e
Update library manual with the new XPLAINBridge project's dual mode bridge/programmer functionality.
15 years ago
1d2bc47eba
Clean up of the altered XPLAINBridge project.
15 years ago
60fd0ff418
Changed XPLAINBridge project to be both a USB to USART bridge and a PDI programmer, based on the state of a mode select pin.
15 years ago
2746154652
Added master mode hardware TWI driver.
...
Fixed a bug in the incomplete Webserver project, where the packet data was not being written to and read from the correct buffer address.
15 years ago
c299552ab3
Oops - missing brace in the updated Benito code causing compilation to fail.
15 years ago
f9781ca6ff
Fix the Benito project not pulsing the target's /RESET line when DTR is de-asserted.
15 years ago
f3d370a777
Clean up and add more comments to the AVRISP-MKII project. Make sure the SPI_MULTI command handler supports multiple packet responses. Use slightly smaller/faster repeated indirect-load commands when retrieving the PDI target's memory CRCs.
15 years ago
b0ce1eab66
Fix incorrect preprocessor checks in the PLL prescaler mask determination code for the ATMEGA32U2.
15 years ago
77dda302ac
Fixed invalid USB controller PLL prescaler values for the ATMEGAxxU2 controllers
...
Fixed lack of support for the ATMEGA32U2 in the DFU and CDC class bootloaders
Changed incomplete Webserver project over to using the uIP timer library.
15 years ago
f0d6d4ef13
Started Webserver RNDIS host project.
15 years ago
89e4d73289
Fixed incorrect interface values in the VirtualSerialMouse and KeyboardMouse demo class driver structures.
...
Added caveat information to the CDC device class driver.
15 years ago
5fc294a650
Oops - incorrect Dataflash chip select mask in the XPLAIN Dataflash driver.
15 years ago
a56d95e8c2
Fix XPLAIN Dataflash and LED drivers.
15 years ago
efb6c35778
Update Doxygen configuration files to the latest Doxygen version.
15 years ago
d97db1120b
Added support to the MIDI Class drivers for packed data, where multiple MIDI events are packed into a single USB packet. Added new MIDI Class driver flush routines to override packing behaviour.
15 years ago
60e9641222
Inline USB management functions in the Class drivers which are standardized but currently unused, to prevent them from using up unneccesary cycles and flash in the user application.
15 years ago
6122ba93cf
Fix MassStorageKeyboard demo USE_INTERNAL_SERIAL check being performed before the required library headers were included, causing a compilation error.
...
Added notes to the class driver functions indicating which functions require what Device/Host state machine states to function.
15 years ago
1e1cf2c499
Fix CDC blocking streams in Host mode locking up when the device is removed.
15 years ago
71e5bcee3d
Fixed blocking CDC streams not aborting when the host is disconnected.
15 years ago
58a39c6666
Clean up MassStorageKeyboard demo.
15 years ago
7f9f97c792
Update copyright year to 2010.
15 years ago
5e3572d7d1
Oops - remove accidentally committed .lst files from the TemperatureDataLogger project.
15 years ago
0ea819f781
Fix TemperatureDataLogger - sample tick timer wasn't being initialized in the correct CTC mode.
15 years ago
7beafc64e2
Oops - fix include directory for case-sensitive filesystems.
15 years ago
208edeee0f
Add new TemperatureDataLogger project, a simple USB Mass Storage class Temperature Data Logger using the onboard Dataflash and Temperature sensor.
15 years ago
f5951d1593
Reduced guard bit time in the AVRISP project PDI/TPI protocols to reduce the time needed to reverse the data communication direction.
15 years ago
b1dbd92c32
Fixed AVRISP PDI race condition where the guard time between direction changes could be interpreted as a start bit. Fixed TPI interface lines not being changed correctly when in bit-banged TPI mode.
15 years ago
e1c1c25619
Change the AVRISP project's RESET LINE makefile tokens to AUX LINE, as it is not always used for target reset.
15 years ago
93fe420d89
Minor documentation updates.
15 years ago
4600fd0cb6
Fix TPI NVM Write handler -- AVRStudio sends out writes in page sized chunks, not byte sized chunks.
15 years ago
7c8f4a716f
Add first draft of the TPI NVM commands for reading, writing and erasing a target. Needs testing when physical access to a part is available.
15 years ago
3222f21b84
Add dummy undocumented TPI XPROG parameters to the AVRISP project so that TPI programming mode can be entered.
15 years ago
39ab7507dd
Remove duplicate #include of <avr/wdt.h> in the TeensyHID bootloader.
15 years ago
d4ca7fb44c
Fix MIT license language to make its intent clearer.
15 years ago
d15cbdd490
Fix mistakes in the XPROGTarget.c/.h files for TPI mode software USART clock rate and PDI mode XPLAIN board autoconfiguration.
15 years ago
8301dc553e
Fix references to the renamed AVRISP-MKII project folder.
15 years ago
8ecdc2b144
Rename AVRISP project folder to AVRISP-MKII.
15 years ago
022035839e
Remove missed timer 0 init code in the ISP protocol handler in the AVRISP project. Switch the XPROG protocol target communications handler over to using Timer 1 COMA/COMB ISRs for the two physical layers, rather than COMA/ICR1. Speed up bit-banged USART mode slightly.
15 years ago
8cd7e118e9
Fixed ISP mode in the AVRISP programmer project.
15 years ago
d1608d4af3
Added const where possible to the source functions in the Projects directory.
...
Added command timeout to the AVRISP project so that incorrectly connected targets no longer freeze the device.
Removed string descriptors from the TeensyHID bootloader to reduce its size.
15 years ago
35dac470f2
Complete TPI protocol code to enter and exit TPI programming mode for the ATTINY 6-pin devices.
15 years ago
65fcebf478
Complete combining of PDI and TPI target communication code files, stub out TINY NVM controller functions.
15 years ago
cfdab42dcf
Rename PDITarget.c/.h to XPROGTarget.c/.h so that both PDI and TPI programming can be included in the one set of files.
15 years ago
18b0d408a9
Remove serial driver use from the AVRISP project now that it is no longer needed.
15 years ago
9decc2bc59
Combine PDIProtocol and TPIProtocol into a single XPROGProtocol set of files.
15 years ago
05fcf7e2a7
Rename PDIProtocol.c/.h to XPROGProtocol.c/.h as it will now handle both TPI and PDI programming.
15 years ago
ce044844ea
Combine AVRISP project TPI and PDI lib directories - these protocols use the same underlying XPROG wrapper for the host-to-programmer command wrapping.
15 years ago
Dean Camera