cf7859e2f2
Minor documentation improvements.
14 years ago
ce3db96d9a
Make sure CRC value is pre-zeroed before reading from the XMEGA target device, to prevent corrupt data from being returned to the host in the AVRISP-MKII Clone project.
14 years ago
47f6a35013
Reintegrate the FullEPAddresses development branch into trunk.
14 years ago
25ac76a251
Reverted AVRISP-MKII clone project watchdog based command timeout patch in favour of a hardware timer, to allow for use in devices with WDTRST fuse programmed.
14 years ago
6ee79029d5
Raised the guard bits in the AVRISP-MKII clone project when in PDI and TPI to 32, to prevent communication errors on low quality connections to a target.
14 years ago
b7f4370c8e
Oops - don't reset AVRISP-MKII timeout in XPROG mode, as this is synchronous serial and data is always received regardless of attached or non-attached target.
14 years ago
7a1033025b
Minor documentation fixes.
...
Make an explicit constant name for the CMDEX bit of the target's NVM command register in the AVRISP-MKII Clone project.
14 years ago
18b82b3575
Updated the AVRISP-MKII Clone programmer project to be compatible with the latest version of AVR Studio (version 5.1).
...
Changed the AVRISP-MKII Clone programmer project to report a fixed 3.3V VTARGET voltage on USB AVRs lacking an ADC instead of 5V to prevent warnings in AVR Studio 5.1 when programming XMEGA devices.
14 years ago
f1b6ddb710
Update file contributor copyrights for 2012.
14 years ago
2c806f6cee
Update file header copyrights for 2012.
14 years ago
956f9e3709
Fixed AVRISP-MKII Clone timing out on long programming commands such as programming the EEPROM on an ATMEGA8 (thanks to Martin Kelling).
14 years ago
dd312cead4
Make all AVRISP-MKII programmer parameters readable, since there's no real good reason to restrict parameter reads. Fix misspelt target reset polarity EEPROM variable.
14 years ago
f201f6697b
Run wspurify script on /trunk/ and /branches/ C source files, to remove any trailing whitespace at the end of each line.
14 years ago
798cc84ff5
Fixed AVRISP-MKII Clone failing to start application firmware once a TPI programming session is exited.
14 years ago
c6d6bdae0a
Added reliability patches to the AVRISP-MKII Clone project's PDI/TPI protocols (thanks to Justin Mattair).
14 years ago
db73b11244
Added reliability patches to the AVRISP-MKII Clone project's ISP and PDI/TPI protocols (thanks to Justin Mattair).
14 years ago
7dffa15c16
Massive corrections to the project documentation and code comments, thanks to Russian translation services provided by Andrey from Microsin.ru.
15 years ago
0b6d5467bc
Oops - revert commit of an incomplete port of the AVRISP-MKII project.
15 years ago
ea922c98d1
Added new incomplete AudioInputHost Host LowLevel demo.
...
Added missing Audio class control request definitions.
Added support for the Audio class GET STATUS request so that it is correctly ACKed when sent by the host.
15 years ago
e0852408de
Replace cast-as-char* byte access of multibyte variables with proper shifts and masks to preserve endianness across different architectures.
15 years ago
899df7d331
Renamed all low level Endpoint_Read_*, Endpoint_Write_* and Endpoint_Discard_* functions to use the number of bits instead of a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures.
...
Renamed all low level Pipe_Read_*, Pipe_Write_* and Pipe_Discard_* functions to use the number of bits instead of a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures.
15 years ago
279e1b6ece
Fixed programming errors in the AVRISP-MKII project when the programming packet is a round multiple of the endpoint bank size under avrdude (thanks to Steffan Woltjer).
15 years ago
afd828c095
Removed SerialStream module, rolled functionality into the base USART Serial peripheral driver instead through the new Serial_CreateStream() and Serial_CreateBlockingStream() methods.
...
Renamed the Serial byte send/receive functions to remain consistent with the CDC driver's byte functions.
Altered the serial byte receive function to make it non-blocking.
15 years ago
26017b68b0
Changed AVRISP-MKII project to use the Watchdog interrupt for command timeouts, to reduce CPU usage and free timer 0 for other uses in the future.
15 years ago
f555ad7ced
Altered all endpoint/pipe stream transfers so that the new BytesProcessed parameter now points to a location where the number of bytes in the transfer that have been completed can be stored (or NULL if entire transaction should be performed in one chunk).
...
Added new Endpoint_Null_Stream() and Pipe_Null_stream() functions.
Removed the NO_STREAM_CALLBACKS compile time option due to the new partial stream transfer feature replacing it.
Fixed errors in the incomplete Test and Measurement device demo preventing proper operation (thanks to Pavel Plotnikov).
15 years ago
1d433d4506
Update copyright year on all source files.
15 years ago
c43605612d
Lower bulk endpoint polling rate in the descriptors to the lowest possible value to give maximum throughput.
15 years ago
8f7437dda2
Rename incorrectly named XPROGTarget_SendBreak() function to XPROGTarget_SendIdle(), as it is sending idle bits and not break bits.
15 years ago
cbc00c843a
Fixed AVRISP-MKII clone project not starting the target's program automatically after exiting TPI programming mode.
15 years ago
a9f313afa9
Slow AVRISP-MKII clone PDI/TPI programming speed back to 250KHz due to issues with the XPLAINBridge when PDI programming at faster rates.
...
Speed up XMEGANVM_WaitWhileNVMControllerBusy() by preloading the status register address into the pointer register of the target's NVM controller and then reading via a faster indirect load command.
15 years ago
002cd6df49
Added new XCK_RESCUE_CLOCK_ENABLE compile time option to the AVRISP-MKII clone programmer project (thanks to Tom Light).
15 years ago
f2324fc2b4
Second patch to fix incorrect PDI/TPI programming speed.
15 years ago
d41cd9a41a
Fixed PDI/TPI programming speed of ~250KHz in the AVRISP-MKII Clone project, instead of the desired 500KHz.
15 years ago
cb779e3d7d
Changed over www.fourwalledcubicle.com links to the new www.lufa-lib.org redirect domain, including the new aliased links for LUFA-related pages such as the various download/source control mirrors and support lists.
15 years ago
5a4def7478
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda
15 years ago
93793679c9
Revert change to the AVRISP-MKII project for fuse byte programming via the CMDEX bit - this appears to be an error in the XMEGA manual external memory programming table.
15 years ago
a447ae134f
Fixed broken lock byte programming in the AVRISP-MKII clone project for some XMEGA targets.
15 years ago
de5b16909a
Added support to the AVRISP-MKII project for ISP speeds slower than 125KHz via a new software SPI driver.
...
Added new SPI_ORDER_* data order masks to the SPI peripheral driver.
15 years ago
2461ae508c
Future proof the XPROG protocol of the AVRISP-MKII project, so that non PDI and TPI requests return failure.
15 years ago
6bda628718
Update all demos, projects and bootloaders to indent all function parameters, one per line, for better readability.
...
Add missing const qualifiers to the demos.
16 years ago
666c0fa4c3
Remove the timeout period extension code from the AVRISP project, as no single command should ever exceed the maximum timeout period. Extend timeout period to 1 second per command, so that an accidental timeout will never occur.
16 years ago
016a4c068a
Make loops in AVRISP-MKII Clone project's XPROG protocol infinite rather than looping on the timeout value, as this is already checked inside the loop anyway.
16 years ago
51c2dcf3b0
Fixed broken PDI EEPROM Section Erase functionality in the AVRISP-MKII project.
16 years ago
711542ee89
Spell check code and manual pages. Remove custom Doxygen CSS stylesheet, as the new 1.7 Doxygen's default stylesheet is much better.
16 years ago
a14ece5f57
Change over Doxygen \note documentation to \pre where applicable.
16 years ago
fc92f9969c
Minor documentation cleanups.
16 years ago
ff61dfa505
Fixed AVRISP project not sending a full erase-and-write EEPROM command to XMEGA targets when writing to the EEPROM instead of the split write-only command (thanks to Tim Margush).
16 years ago
cd0093a14b
Fixed AVRISP-MKII clone project not correctly issuing SET EXTENDED ADDRESS commands when the extended address boundary is crossed during programming or readback (thanks to Gerard Sexton).
...
Fixed warnings when building the AVRISP-MKII clone project with the ENABLE_XPROG_PROTOCOL compile time option disabled.
16 years ago
071e02c6b6
Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.
16 years ago
ab8668b14e
Removed software PDI/TPI emulation from the AVRISP-MKII clone project, as it was very buggy. PDI and TPI must now be implemented via seperate headers instead of the one unified ISP/TPI/PDI header.
16 years ago
Dean Camera