271be037b7
Partial Commit: Move AVRISP project out of the Projects\Incomplete directory.
15 years ago
8aee4cb2f2
Add function documentation to the AVRISP project.
15 years ago
73801c73a1
Finished preliminary AVRISP project - all V2 protocol commands now work correctly for basic operations.
15 years ago
4742e95a3f
Fixed AVRISP V2 Protocol handler for the READ_FLASH_ISP and READ_EEPROM_ISP handler - can now correctly read back device data. Programming command handler is still broken, although first page is written correctly to FLASH in paged write mode.
15 years ago
6d1adf7339
Updated Benito project -- added hardware interrupt and software buffering for serial data reception to prevent missed characters, condensed pulse generation counters into a struct for clarity.
...
Added check to CDC_Device_BytesReceived() to ensure 0 is returned when device is not enumerated to a host.
Move AVRISP project's V2Protocol_DelayMS() function to be static inline, as it is now very minimal. Added extra project doxygen documentation.
15 years ago
f070902bdb
Fix endianness of LOAD_ADDRESS command data, add correct PROGRAM_FLASH_ISP/PROGRAM_EEPROM_ISP polling and endpoint bank clearing, add hardware delays/timeouts to the V2 Protocol handler in the AVRISP project.
15 years ago
8cb8f1cfdd
Switch to hardware delays and timeouts via a hardware timer in the V2 Protocol handler.
...
More additions to the PROGRAM_FLASH_ISP and PROGRAM_EEPROM_ISP commands, although neither work correctly yet.
Added dummy RESET_PROTECTIONS handler to prevent the Atmel driver from crashing when the command returns an UNKNOWN_COMMAND error code.
15 years ago
92adb00f8e
Added PROGRAM_FLASH_ISP and PROGRAM_EEPROM_ISP handler code to the V2 Protocol handler in the AVRISP project, programming complete checks not yet complete.
15 years ago
f9c0357b73
Fixed V2 Protocol READ_FLASH_ISP and READ_EEPROM_ISP handler code in the AVRISP project.
15 years ago
bff4dbe189
Fix to V2 Protocol for Fuse/Sig/Lock byte read -- off by one error on the array when writing back the response from the device.
...
FLASH/EEPROM reading and writing currently broken and unfinished, respectively.
15 years ago
dbb5f249bd
Added V2 protocol handlers for the READ and WRITE memory commands in the AVRISP project. Finished READ command handler, skeleton WRITE handler implemented.
15 years ago
7e74bd3ea2
Moved out target-related V2 protocol commands into a seperate file for the AVRISP project.
...
Added Load Extended Command functionality to the LOAD ADDRESS V2 Protocol command handler for devices with more than 64KB of memory.
15 years ago
f229502d9a
Fixed AVRISP programmer demo -- can now connect to a target and read/write Sig/Lock/Fuse/OSCCAL bytes successfully.
...
Changed SPI_Init() to allow for the clock polarity and data sample modes to be set.
Changed Dataflash_Init() to no longer call SPI_Init() automatically.
15 years ago
1e8df8951a
Added V2Protocol handlers to the AVRISP project to enter/exit programming mode, and read/write fuses, lockbits, OSCCAL and Signature bytes.
...
Added ShutDown functions for all hardware peripheral drivers, so that peripherals can be turned off after use.
15 years ago
5acf23b254
Renamed Projects/Unfinished to Projects/Incomplete for consistancy.
15 years ago
2f95eea146
Add LOAD ADDRESS command parsing to the V2 Protocol hander in the AVRISP project.
...
Fix up references to functions in the Endpoint/Pipe documentation.
15 years ago
a9602f0250
Change spinloop in the AVRISP project Unknown V2 Protocol Command handler to use Endpoint_WaitUntilReady() instead to prevent infinite loops.
15 years ago
fa8beef82d
Moved out the handling of V2 Protocol parameters to a seperate set of files. Added parameter privellages, so that an error can be returned to the host when trying to perform a get/set value action on a parameter without the correct privellages.
15 years ago
32cc2b8d4d
Reorganise V2Protocol.c, add in function to assert or de-assert target RESET pin.
15 years ago
04354ffcad
Added handler for the V2 Protocol SPI_MULTI command to the AVRISP Programmer project.
...
Added documentation of the makefile CDEFS values to the MagStripe project.
15 years ago
083d3615d3
Corrections to the unfinished AVRISP Programmer project to allow AVRStudio to connect to it.
15 years ago
6d99486791
Fixed invalid data being returned when a GetStatus request is issued in Device mode with an unhandled data recipient.
...
Fix up Programmers Notepad Project file to show new Projects directory layout. Remove now moved AVRISP project from the Projects directory makefile.
15 years ago
0934f5c185
Move AVRISP Programmer project to a new Unfinished subdirectory of Project while it is under development.
15 years ago
bbcdaaa6dc
Enhancements to the AVRISP Programmer project to attempt to get AVRStudio to communicate with the device.
15 years ago
ecd82778cf
Added beginnings of a new AVRISP-MKII clone project.
...
Added new Endpoint_SetEndpointDirection() macro to set the current endpoint direction for bidirectional endpoints.
Renamed internal USB_INT_ENDPOINT_SETUP macro to USB_INT_RXSTPI to fit in with the rest of the interrupt vector macros.
15 years ago
b71ff7c8cd
Added new EVENT_USB_Device_StartOfFrame() event, controlled by the new USB_Device_EnableSOFEvents() and USB_Device_DisableSOFEvents() macros to give bus-synchronised millisecond interrupts when in USB device mode.
15 years ago
25ddbb9e3b
Adjust endpoint polling intervals for HID demos, to make them compliant with the 10ms minimum polling period for Low Speed devices.
15 years ago
99abd1a8b7
Added explicit attribute masks to the device mode demos' descriptors.
15 years ago
85c2716f2d
Make Benito ping-pong LED code more explicit, using masks of the TX and RX LED masks for ping-pong toggle rather than the ambiguous LED "Busy" mask.
...
Fix incorrect event name in MassStorageHost.c.
15 years ago
3848482532
Add Benito board LED driver to the Benito Programmer project.
15 years ago
99c447c754
Fixed issue in USBtoSerial demos where the USART Rx line was not having its pullup enabled at startup, leading to noise being received from the Rx pin when left floating.
...
Removed unused relative Common.h header include from the DriverStubs board stub drivers.
Fixed Benito programmer, use the correct LED functions where needed to ensure correct status display at all times.
15 years ago
c5038f1bf4
Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.
...
Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.
Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.
15 years ago
6f4cc344ab
Rename TOTAL_NUM_CONFIGURATIONS to FIXED_NUM_CONFIGURATIONS, to match the existing FIXED_CONTROL_ENDPOINT_SIZE compile time option. Add FIXED_NUM_CONFIGURATIONS to the descriptors of each project using the option.
15 years ago
eb41086947
Fix demos based on the device mode HID class driver, as well as the driver itself. Changed HID device class driver to require the user to give a buffer and size to hold the previously generated report, for comparison purposes, and altered the prototype of the CALLBACK_HID_Device_CreateHIDReport() function so that reports can be sent to the host even if there are no apparent changes (useful for relative movements in mice, etc.).
16 years ago
7df6b9563c
Add new HID_Device_MillisecondElapsed() function to the HID device Class driver, to move the burden of managing the Idle period of each instance to the library and not the user application.
16 years ago
72932e2780
Fix to HID device mode Class driver, so that new reports are compared against the old, and updated reports made within the idle period are sent immediately to the host.
16 years ago
6928f17b64
Extend the automatic serial number descriptor code to read out and send all 10 bytes (20 characters) of the internal serial number on supported AVRs, rather than just the first 6 bytes (12 characters).
16 years ago
3472af91a5
Change project makefiles so that the current target settings and not just the board selection is printed during the build process.
...
Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.
16 years ago
61ff4824a9
Changed AudioOutput demos to explicitly use timer 3 - the smaller USB AVRs where timer 1 was needed instead did not have the endpoint size neccesary for good audio throughput anyway.
...
Fix Benito documentation indicating erronously that the project used the HID USB class instead of the CDC class.
16 years ago
864196c884
State information for class drivers is now zeroed out during enumeration (both in device and host mode) to ensure sane values after each enumeration. User code should no longer explicitly set state information as this is no longer preserved.
16 years ago
200821fe82
Added new LEDs_ToggleLEDs() function to the Board LEDs driver.
16 years ago
3991c94b38
Ensure new Benito Programmer project matches Don's established LED behaviour - flash LED while generating target /RESET pulse, ping-pong LEDs during enumeration.
16 years ago
2a0c28e6e4
Minor updates to the Benito programmer - remove redundant PORT register manipulations.
16 years ago
06f3a6a876
Tweaks to the new Benito Programmer project for documentation and port/pin usage.
16 years ago
a6e85d6ed8
Added new Benito project, a simple modified USB-to-Serial bridge for the programming of AVRs using the official Arduino bootloader.
16 years ago
e071f3897a
Added new USB_DeviceState variable to keep track of the current Device mode USB state.
...
Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.
Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.
Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.
Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
16 years ago
4f747e7b76
Change Doxygen configuration files to not produce 4096 directories for the documentation files -- the LUFA components do not generate enough documentation files to justify the large performance hit of creating so many directories.
...
Fix missing Doxygen documentation in the Class Driver Mass Storage Device demo.
16 years ago
b243c2b80b
Magstripe Project: Ensure that empty tracks still print out a newline seperator so that the host always knows what track data is being sent.
...
Updates to PrinterHost demo to include some PCL test data plus fixes to the GetDeviceID routine.
16 years ago
d6543dee0d
Minor updates to the Magstripe and MissileLauncher projects to fix bugs and improve performance.
...
Fixed error in GenericHID descriptors preventing it from passing the USB-IF HID tests (thanks to Søren Greiner).
16 years ago
37f8a84f35
Added new TOTAL_NUM_CONFIGURATIONS option, removed USE_SINGLE_DEVICE_CONFIGURATION compile time option (but silently convert it to USE_SINGLE_DEVICE_CONFIGURATION internally for compatibility).
...
Added new USE_FLASH_DESCRIPTORS compile time option. By default, descriptors can now lie in mixed memory spaces (specified by a new parameter to the CALLBACK_USB_GetDescriptor() function) unless one of the USE_*_DESCRIPTORS compile time option is specified.
16 years ago
Dean Camera