77dbfd3cc4
Add missing "used" attribute to ATTR_INIT_SECTION to ensure functions declared with that meta-attribute are not discarded by the linker.
...
Add missing function and definition documentation.
13 years ago
b5682f2c44
Add project name to the Doxygen makefile target output.
13 years ago
e64f4b0cd9
Update the TempDataLogger project and driver documentation to use the new TWI_BITLENGTH_FROM_FREQ() macro.
14 years ago
413438eb23
Add new TWI_BITLENGTH_FROM_FREQ() macro to the AVR8 TWI peripheral driver.
...
Change Delay_MS() to accept a 16-bit parameter rather than an 8-bit parameter for longer possible delays.
Minor documentation improvements.
14 years ago
88d022a752
Make TWI_ReadPacket() use a repeated start condition rather than a full bus release/recapture after the read address has been sent.
...
Fix TWI_ReadPacket() not releasing the bus correctly after all data transferred.
Make TWI_SendByte() and TWI_ReceiveByte() non-inline to reduce compiled binary size.
14 years ago
d0ac8e46f9
Renamed the JTAG_DEBUG_ASSERT() macro to JTAG_ASSERT().
...
Changed the reports in the GenericHID device demos to control the board LEDs, to reduce user confusion over the callback routines.
Fixed swapped TWI_ADDRESS_READ and TWI_ADDRESS_WRITE values.
Fixed TWI_ReadPacket() not releasing the TWI bus on read completion.
14 years ago
af725dd418
Fix TWI peripheral driver example code in the library documentation.
14 years ago
9708b45e69
Minor documentation corrections.
14 years ago
04287b76c5
Add more missing function attributes to the TWI peripheral driver.
...
Fix incorrect standard request name in the host standard request driver.
14 years ago
7207b05695
Add missing function attributes.
14 years ago
065ed4da20
Added new USB_Host_GetDeviceStatus() function for USB Host mode.
14 years ago
87b57522b2
Fix improper indenting of the internal board driver dispatch headers.
...
Slight improvements to the ADC peripheral driver example in the manual.
14 years ago
bad956bace
Fix TWI driver documentation example (thanks to Jerome Colombie).
14 years ago
f10126a95e
Added new \ref SPI_GetCurrentMode() function to the SPI peripheral driver.
14 years ago
7dffa15c16
Massive corrections to the project documentation and code comments, thanks to Russian translation services provided by Andrey from Microsin.ru.
14 years ago
f01a05415c
Spell check library source code files.
14 years ago
5eb1862d54
Remove redundant Doxygen guards from the internal preprocessor definitions.
14 years ago
66c38cd940
Added TWI baud rate prescaler and bit length parameters to the TWI_Init() function (thanks to Thomas Herlinghaus).
14 years ago
3a00e41639
Make sure the peripheral driver .c files include the driver dispatch header, rather than the architecture specific header files.
14 years ago
b6a3c78fa3
Rename architecture specific driver files, to make them appear with uniquely identifying filenames in the documentation.
14 years ago
28a1ee29a1
More Doxygen updates for multiple architecture support.
14 years ago
3832182fe1
Fix documentation glitches from the restructuring changes.
14 years ago
3d4d8e7f62
Add new ARCH option to the makefiles to (eventually) specify the target device architecture. Update non-usb peripheral drivers to reflect future multiple architecture support.
14 years ago
43b9d552bb
Renamed all driver termination *_ShutDown() functions to the more logical name *_Disable().
14 years ago
43c4735305
Renamed the PRNT_Host_SendString(), CDC_Host_SendString() and CDC_Device_SendString() functions to *_SendData(), and added new versions of the *_SendString() routines that expect a null terminated string instead.
...
Added new Serial_SendData() function to the Serial driver.
14 years ago
afd828c095
Removed SerialStream module, rolled functionality into the base USART Serial peripheral driver instead through the new Serial_CreateStream() and Serial_CreateBlockingStream() methods.
...
Renamed the Serial byte send/receive functions to remain consistent with the CDC driver's byte functions.
Altered the serial byte receive function to make it non-blocking.
14 years ago
32830a2b82
Added new ADC_GET_CHANNEL_MASK() convenience macro to the ADC driver.
14 years ago
70d55f6e0c
Added new high level TWI packet read/write commands, altered behaviour of the TWI_StartTransmission() function.
...
Spell check source code files.
14 years ago
7dc3d3a68f
Minor documentation improvements.
14 years ago
1d433d4506
Update copyright year on all source files.
14 years ago
6026b9128b
Fix compile errors from the changes to the SerialStream and board Temperature drivers.
14 years ago
a8b66f318d
Documentation improvements - put driver example code into its own section, fix incorrect and missing section names.
14 years ago
2073b96d82
Added basic driver example use code to the library documentation.
...
Made the USARTStream global public and documented in the SerialStream module, allowing for the serial USART stream to be accessed via its handle rather than via the implicit stdout and stdin streams.
14 years ago
b120c4e4cd
Move RNDISConstants.h into the RNDIS class driver common definition header.
...
Add logical grouping of related #define values for better Doxygen documentation.
14 years ago
cb779e3d7d
Changed over www.fourwalledcubicle.com links to the new www.lufa-lib.org redirect domain, including the new aliased links for LUFA-related pages such as the various download/source control mirrors and support lists.
14 years ago
5517f96e86
Oops - fix broken SPI driver due to missing bit inversion on a port mask.
14 years ago
31daf04c6a
Fix SoftUART.c not compiling due to accidental check in of changes not yet complete in the rest of the XPLAINBridge project code.
14 years ago
5a4def7478
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda
14 years ago
accadba2dd
Fixed SPI driver not explicitly setting /SS and MISO pins as inputs when SPI_Init() is called.
14 years ago
009eebf229
Fix incorrect ADC driver documentation for the parameters of ADC_Init(), fix incorrect call to ADC_Init() in the TemperatureDatalogger project.
15 years ago
48c5cdced4
Hide the PROGMEM attribute from Doxygen, as it appears to confuse the parser in some situations.
15 years ago
9597b33c33
Fixed Serial peripheral driver not turning off the USART before reconfiguring it, which would cause incorrect operation to occur (thanks to Bob Paddock).
15 years ago
612df774d9
Oops - fix mixed "initialize" and "initialise" - opt for American spelling due to its wide use in technical standards.
15 years ago
0f45b9c8e0
More spell checking of all source files -- correct missed errors, switch to EN-GB spelling dictionary.
15 years ago
1d4ff3695d
Oops - remove duplicated SPI driver init mask.
15 years ago
de5b16909a
Added support to the AVRISP-MKII project for ISP speeds slower than 125KHz via a new software SPI driver.
...
Added new SPI_ORDER_* data order masks to the SPI peripheral driver.
15 years ago
9b0e4b8356
Convert over internal pseudo-function macros to true inline functions for added type-safety and compile-checking.
15 years ago
97143bf814
Add missing const qualifiers to class drivers.
...
Indent core library function parameters so that there is only one parameter per line, to increase readability.
15 years ago
6b5e684c77
Update makefiles to use the latest WinAVR/Atmel toolchain makefile template.
...
Add new module source variables to the library core makefile, so that module sources can be added to a project's makefile on a per-module rather than per-file basis.
15 years ago
deed746d37
Renamed SERIAL_STREAM_ASSERT() macro to STDOUT_ASSERT().
...
Minor tweaks to the library documentation.
15 years ago
Dean Camera