ff09cf9c73
Fix XPLAINBridge project discarding characters from the USB interface due to a double read from the endpoint.
...
Make XPLAINBridge and USBtoSerial projects more reliable by forcing a flush if the UART-to-USB buffer becomes nearly full.
Reduce locking in the LightweightRingBuffer.h header files by only locking on the update of the buffer count, and require insertions and removals from each buffer to occur in only one execution thread.
Fix CDC_*_ReceiveByte() returning 0 when the interface is not configured, instead of the new -1 error value.
Fix CDC_Host_ReceiveByte() not re-freezing the pipe if no packet has been received.
Remove redundant Pipe token set commands in the CDC and RNDIS host class drivers.
14 years ago
fb0e6597b6
Invert the logic for the VBUS power light in the AVRISP-MKII project for the USBTINY-MKII board target.
14 years ago
5dfa25f81a
Re-add deleted linker options to the Bootloader makefiles, which was preventing the compiled application from being shifted into the bootloader section address space.
14 years ago
9597b33c33
Fixed Serial peripheral driver not turning off the USART before reconfiguring it, which would cause incorrect operation to occur (thanks to Bob Paddock).
14 years ago
612df774d9
Oops - fix mixed "initialize" and "initialise" - opt for American spelling due to its wide use in technical standards.
14 years ago
0f45b9c8e0
More spell checking of all source files -- correct missed errors, switch to EN-GB spelling dictionary.
14 years ago
2034141a7e
Spell check more of the third party libraries used by LUFA.
14 years ago
fd9b34aac4
Add the formula used to obtain the bootloader start address to the Bootloader makefiles to help users compute the correct address for each device based on the bootloader section size.
14 years ago
37c601dbf6
Fix typo in DualVirtualSerial.c due to the changed CDC Device APIs that was preventing the demo from being compiled.
14 years ago
24e621a8d8
Altered the CDC Deivice and Host Class drivers' receive byte routines, so that no data is indicated by a negative return value.
...
Added auto flushing of OUT data to the CDC Host Class driver's USBTask function to automatically flush the send pipe buffer.
14 years ago
7c8d16fd7a
Oops - need to turn off USART via control register B before reconfiguring, fix ordering of USART control register modifications in the Benito and USBtoSerial projects.
14 years ago
28401f7bb7
Spell check all source files once again to find any typos.
15 years ago
ca007f91f2
Fixed Benito and USBtoSerial projects not turning off the USART before reconfiguring it, which could cause incorrect operation to occur (thanks to Bob Paddock).
15 years ago
62022252ea
Add special support to the AVRISP-MKII for the new model USBTINY-MKII's additional LED to indicate target power source.
...
Add support to the USBTINY-MKII's additional LED in the board's LED driver header.
Changed LED indicator masks for the AVRISP-MKII project, so that there are defined roles for each LED.
15 years ago
30c2b620de
Remove obsolete macros and preprocessor checks from the AVRISP-MKII project's V2Protocol command handler header file.
15 years ago
1d4ff3695d
Oops - remove duplicated SPI driver init mask.
15 years ago
de5b16909a
Added support to the AVRISP-MKII project for ISP speeds slower than 125KHz via a new software SPI driver.
...
Added new SPI_ORDER_* data order masks to the SPI peripheral driver.
15 years ago
9a97f16b07
Add TMC header read and write functions, so that TMC data can now be exchanged in both directions.
...
Minor update to the LowLevel MassStorage device demo, so that the ReadInCommandBlock() performs the data OUT endpoint selection and packet arrival test.
15 years ago
059307d89c
Use static inline intermediatary functions in Endpoint.h to handle the masking for the private endpoint configuration routine, instead of performing the masking in the Endpoint_ConfigureEndpoint() macro.
15 years ago
be2a7d4598
Move over message ID specific header data to unions inside the standard TMC header structure, so that all header data is read in one chunk in the incomplete TMC demo.
15 years ago
cd39c38d5f
Rename reserved members of all structs so that they are uniformly named across all demos/projects/bootloaders.
...
Added start of the Incomplete TMC demo's command parser code.
15 years ago
6e2920bc84
Add comments to the currently completed portions of the incomplete Test and Measurement Class demo.
15 years ago
0803cf00ac
Add missing INTERRUPT_CONTROL_ENDPOINT compile time option to the Mass Storage device projects/demos and incomplete Test and Measurement Class demo, which was accidentally removed during the makefile updates.
...
Alter Test and Measurement Class demo's request handlers to accept, process and correctly return the fields indicated in the specification.
15 years ago
89a32baf58
Add stream callback flags and class specific control request handler code to the incomplete Test and Measurement Class device demo.
...
Change over the keyboard demo's manufacturer name back to the primary author of the demo.
15 years ago
4c9425c0d5
Added periodic flush timer to the Benito project. Alter the serial transmission code so that sent bytes do not block the remainder of the main program code from running.
15 years ago
3a79548dc2
Add TMC device capabilities to the incomplete TMC demo.
15 years ago
eb8a708b53
Update size of compiled Mouse demo in documentation, fix indenting in Device.h.
15 years ago
9b0e4b8356
Convert over internal pseudo-function macros to true inline functions for added type-safety and compile-checking.
15 years ago
2461ae508c
Future proof the XPROG protocol of the AVRISP-MKII project, so that non PDI and TPI requests return failure.
15 years ago
ac0ece0141
Added start of a low level device Test and Measurement class demo (thanks to Peter Lawrence).
15 years ago
e6f37221fa
Fix up minor whitespace formatting errors.
15 years ago
6bda628718
Update all demos, projects and bootloaders to indent all function parameters, one per line, for better readability.
...
Add missing const qualifiers to the demos.
15 years ago
83e293a6ec
Replace internal Pipe_BytesToEPSizeMask() routine with a new version which results in smaller code.
15 years ago
97143bf814
Add missing const qualifiers to class drivers.
...
Indent core library function parameters so that there is only one parameter per line, to increase readability.
15 years ago
99d8a39363
Move and rename DevChaper9.c/.h and HostChapter9.c/.h to the HighLevel directory, new named DeviceStandardReq.c/.h and HostStandardReq.c/.h.
...
Rename LowLevel.c/.h to USBController.c/.h.
Remove dependancies on the complete <avr/io.h> header in the HighLevel USB driver directory, to ensure less work is required in later (possible) ports.
15 years ago
5f57785404
Add missing const qualifier to the parameters of the USB_GetNextDescriptorComp() function.
...
Reduce spacing of the structure elements in StdDescriptors.h to make the code more readable.
15 years ago
f9bcac5e00
Fixed MIDI_Device_SendEventPacket() not correctly waiting for the endpoint to become ready (thanks to Robin Green).
15 years ago
6b5e684c77
Update makefiles to use the latest WinAVR/Atmel toolchain makefile template.
...
Add new module source variables to the library core makefile, so that module sources can be added to a project's makefile on a per-module rather than per-file basis.
15 years ago
42ac34b484
Change over all makefiles to use C99 standards mode, rather than C99 + GNU Extensions.
15 years ago
9299735c75
Disable strict aliasing explicitly in the project makefiles, as this is apparently enabled by default in newer AVR-GCC builds, and aliasing is used heavily for type-punning through the LUFA and third party library's codebase.
15 years ago
f4710f6f86
Removed the automated checking of event names in the demo, project and bootloader makefiles due to inconsistancies between the behaviour of the command line tools used to perform the check on each platform.
...
Removed the internal endpoint and pipe memory allocation macros, as this is already performed directly in the code. Simplify the endpoint and pipe reset procedure.
15 years ago
dfe50ff349
Added ability to set the serial baud rate via the user's terminal in the XPLAINBridge project.
15 years ago
40631e9fe5
Fix pointer aliasing warning in the Mass Storage demos.
15 years ago
e2e1fe5aad
Fixed possible buffer overrun in the XPLAINBridge project when in serial bridge mode.
15 years ago
7cef08e10e
Fixed HID device class driver still using PrevReportINBuffer for GetReport control requests even when it has been set to NULL by the user application (thanks to Axel Rohde).
15 years ago
d83cc9ac80
Change AVRISP-MKII and XPLAINBridge descriptors to indicate that the device is bus-powered only. Add compile time options to reduce the compiled size of the firmware.
15 years ago
666c0fa4c3
Remove the timeout period extension code from the AVRISP project, as no single command should ever exceed the maximum timeout period. Extend timeout period to 1 second per command, so that an accidental timeout will never occur.
15 years ago
0313034245
Added const attributes to some of the class driver function parameters that were missing it.
15 years ago
3a3a4e2abf
Add AVRStudio 4 project files to the ClassDriver Device mode demos.
15 years ago
f985a8c176
Add AVRStudio 4 project files to the LowLevel Device mode demos.
15 years ago
Dean Camera