Richard Wackerbarth
096046c09f
Merge Improve Makefile use of avrdude (PR#2477)
9 years ago
Richard Marko
1183c10a2e
makefile: drop -q -q (much quiet) from avrdude flags
...
Annoying when trying to figure out if uploading
actually does something.
9 years ago
Richard Marko
0e064357f4
makefile: use /etc/avrdude/avrdude.conf on linux
...
No need to look for arduino specific avrdude configuration
as distributions ship their own avrdude.conf file that
is compatible with arduino.
9 years ago
Richard Wackerbarth
960de3411b
Merge Temp Sanity Checks (PR#2514)
9 years ago
Scott Lahteine
bcb7d5a149
Improve sanitycheck for TEMP_SENSOR_1
9 years ago
Scott Lahteine
5b24f59401
Add sanity checks for temp sensors
9 years ago
AnHardt
fd0e81b0c7
Distinguish between BUZZER and SPEAKER (PR#2513)
...
A speaker needs a AC or a pulsed DC to make a sound, a buzzer only needs a DC.
A buzzer has it's own resonator. It works in most cases to feed the buzzer with a pulsed DC, but the sound will not be as loud as with pure DC.
There seem to be boards where the BEEPER-pin is not able to handle a PWM. Obviously intended for a buzzer.
To make these board able to handle a speaker
* replace the PWM based tone()-function again with a on-delay-off-delay loop.
Hopefully the last time I touch the beeper code.
9 years ago
Richard Wackerbarth
53d9c9ff23
Merge G29 Ending Position (PR#2498)
9 years ago
Scott Lahteine
e2957df05c
Shorthand for do_blocking_move_to
9 years ago
Scott Lahteine
819c5b9b50
Adjust comment on Z adjustment
9 years ago
Scott Lahteine
5a7356b6fc
Patch for G29 final Z position
...
Include all the necessary pieces to get the final Z position after
probing the bed, and add commentary about other possible changes.
9 years ago
Richard Wackerbarth
d233976737
Merge Servo Corrections (PR#2510)
9 years ago
AnHardt
088e09e052
Add forgotten Marlin_main.cpp
9 years ago
AnHardt
8b876241bd
Some more servo code tweaks
...
Just set up the pin. Don't move to a random position.
Simplify servo::move()
* servo::move() does not need the pin parameter - The pin is set during servo_init() with attach().
* servo::move() does not need a return value.
SERVO_LEVELING is the wrong condition to deactivate the servos.
Remove some temporary (Servo *) variables.
SanityCheck for the servo indexes.
9 years ago
Scott Lahteine
b116c096bd
Reduce set_homing_bump_feedrate, save 42 bytes (PR#2512)
...
Updates to `set_homing_bump_feedrate`:
- Move the string into Program Memory, reduce length by 31 bytes
- Use an auto to get the divisor, adjust it on error
- Set feedrate once, at the end
9 years ago
Scott Lahteine
f7e7862588
Better Sanguinololu & Graphical Controller (PR#2504)
...
- Change suggested at
https://github.com/MarlinFirmware/Marlin/issues/2482#issuecomment-123553
266
9 years ago
Scott Lahteine
a1154d4a20
Enable Y and sanity-check CoreXZ (PR#2509)
9 years ago
Richard Wackerbarth
0a7f2a8be7
Merge MegaController & MINIPANEL (PR#2508)
9 years ago
Scott Lahteine
932f1c109e
Move servos to the top in pins_MEGACONTROLLER.h
9 years ago
Scott Lahteine
90f8ddfc1e
Apply MINIPANEL to other configs
9 years ago
AndySze
00dbf69b6d
add MINIPANEL defines
9 years ago
AndySze
8ac5e56934
fixed some format problems and cleaned code
9 years ago
AndySze
eef595aa64
add makerlab mega controller pin configs
9 years ago
Richard Wackerbarth
a0120a533c
Merge CORE_XZ (PR#2503)
9 years ago
AnHardt
4e14e152fa
Add Travis tests for CORXY and COREXZ
9 years ago
AnHardt
27d7d2ccab
Correct bracketing for COREXY-XZ
9 years ago
Scott Lahteine
469843427d
Reduce code in gcode_M81 (PR#2497)
9 years ago
Scott Lahteine
c66955aaf9
Mark unchanging arrays as const (PR#2494)
...
The compiler may be able to optimize if it knows an array won’t be
changing.
9 years ago
Richard Wackerbarth
72b9e3a6ac
Merge Configuration Macros (PR#2495)
9 years ago
Scott Lahteine
278aa15301
Add COUNT macro and apply
9 years ago
Scott Lahteine
d85861d296
Move macros, add ENABLED/DISABLED, add includes
9 years ago
Scott Lahteine
17960fd2b0
Neaten up pins_MEGATRONICS.h (PR#2493)
9 years ago
Scott Lahteine
aac2b9aa9d
Reduce code in gcode_M84 (PR#2492)
...
`gcode_M84` only needs to call `finishAndDisableSteppers`, which calls
all the other functions.
9 years ago
Scott Lahteine
4971fa73f9
Add a sanitycheck error for old servo settings (PR#2491)
...
- Documentation solution for #2476
9 years ago
Scott Lahteine
96ace72ddc
Servos attach/detach based only on servo config
...
Assuming #2470 fixed up the main issue.
9 years ago
Richard Wackerbarth
b80a6a8d31
Correct Kossel Pro Configuration_adv (PR#2473)
9 years ago
Scott Lahteine
000a6fce46
Extract update_endstops from stepper ISR (PR#2474)
9 years ago
Richard Wackerbarth
adfcfcba95
Merge G2/G3 for Delta (PR#2469)
9 years ago
Scott Lahteine
e83eac312e
Move plan_arc next to prepare_move
9 years ago
Scott Lahteine
5c5936508d
G2/G3 Arcs for Delta
...
- Update prepare_move_delta to take a target argument
- Add Delta support to plan_arc
9 years ago
Richard Wackerbarth
39092efe88
Merge CORE_XZ (PR#2300)
9 years ago
Scott Lahteine
9f53e2f0c9
Implement COREXZ in stepper.cpp and planner.cpp
9 years ago
Scott Lahteine
fa00e1d97f
Explode conditions common to corexy and cartesian
9 years ago
Scott Lahteine
c7dd5527b4
Add a C_AXIS and Z_HEAD to support COREXZ
9 years ago
Scott Lahteine
129f986ccf
Add COREXZ option to configurations
9 years ago
Scott Lahteine
69b0490b77
Show minimal preheat options in menus (PR#2471)
9 years ago
Scott Lahteine
9d1d590f43
Merge pull request #2470 from thinkyhead/patch_servo_move
...
Patch servos code for move
9 years ago
Scott Lahteine
eacfe132aa
Change the name of servos[] and servo_t
9 years ago
Scott Lahteine
3b23ccd366
Patch servos code for move
...
- Have `Servo::attach` explicitly return -1 if it fails
- Check for -1 in `Servo::move` because `servoIndex` might be 0
- Make `attach` / `detach` calls conditional on `SERVO_LEVELING`
- Move `SERVO_LEVELING` define to `Conditionals.h`
9 years ago
Richard Wackerbarth
54ddc1d417
Simplify DRY RUN (PR#2358)
...
Elsewhere DRYRUN turns off the heating elements
and ignores constraints on them.
Here, whenever motion is entered into the planner,
if DRY RUN is set, we instantly act as if the E_AXIS
is in the desired final position.
9 years ago