9b0e4b8356
Convert over internal pseudo-function macros to true inline functions for added type-safety and compile-checking.
14 years ago
2461ae508c
Future proof the XPROG protocol of the AVRISP-MKII project, so that non PDI and TPI requests return failure.
14 years ago
ac0ece0141
Added start of a low level device Test and Measurement class demo (thanks to Peter Lawrence).
14 years ago
e6f37221fa
Fix up minor whitespace formatting errors.
14 years ago
6bda628718
Update all demos, projects and bootloaders to indent all function parameters, one per line, for better readability.
...
Add missing const qualifiers to the demos.
14 years ago
83e293a6ec
Replace internal Pipe_BytesToEPSizeMask() routine with a new version which results in smaller code.
14 years ago
97143bf814
Add missing const qualifiers to class drivers.
...
Indent core library function parameters so that there is only one parameter per line, to increase readability.
14 years ago
99d8a39363
Move and rename DevChaper9.c/.h and HostChapter9.c/.h to the HighLevel directory, new named DeviceStandardReq.c/.h and HostStandardReq.c/.h.
...
Rename LowLevel.c/.h to USBController.c/.h.
Remove dependancies on the complete <avr/io.h> header in the HighLevel USB driver directory, to ensure less work is required in later (possible) ports.
14 years ago
5f57785404
Add missing const qualifier to the parameters of the USB_GetNextDescriptorComp() function.
...
Reduce spacing of the structure elements in StdDescriptors.h to make the code more readable.
14 years ago
f9bcac5e00
Fixed MIDI_Device_SendEventPacket() not correctly waiting for the endpoint to become ready (thanks to Robin Green).
14 years ago
6b5e684c77
Update makefiles to use the latest WinAVR/Atmel toolchain makefile template.
...
Add new module source variables to the library core makefile, so that module sources can be added to a project's makefile on a per-module rather than per-file basis.
14 years ago
42ac34b484
Change over all makefiles to use C99 standards mode, rather than C99 + GNU Extensions.
14 years ago
9299735c75
Disable strict aliasing explicitly in the project makefiles, as this is apparently enabled by default in newer AVR-GCC builds, and aliasing is used heavily for type-punning through the LUFA and third party library's codebase.
14 years ago
f4710f6f86
Removed the automated checking of event names in the demo, project and bootloader makefiles due to inconsistancies between the behaviour of the command line tools used to perform the check on each platform.
...
Removed the internal endpoint and pipe memory allocation macros, as this is already performed directly in the code. Simplify the endpoint and pipe reset procedure.
14 years ago
dfe50ff349
Added ability to set the serial baud rate via the user's terminal in the XPLAINBridge project.
14 years ago
40631e9fe5
Fix pointer aliasing warning in the Mass Storage demos.
14 years ago
e2e1fe5aad
Fixed possible buffer overrun in the XPLAINBridge project when in serial bridge mode.
14 years ago
7cef08e10e
Fixed HID device class driver still using PrevReportINBuffer for GetReport control requests even when it has been set to NULL by the user application (thanks to Axel Rohde).
14 years ago
d83cc9ac80
Change AVRISP-MKII and XPLAINBridge descriptors to indicate that the device is bus-powered only. Add compile time options to reduce the compiled size of the firmware.
14 years ago
666c0fa4c3
Remove the timeout period extension code from the AVRISP project, as no single command should ever exceed the maximum timeout period. Extend timeout period to 1 second per command, so that an accidental timeout will never occur.
14 years ago
0313034245
Added const attributes to some of the class driver function parameters that were missing it.
14 years ago
3a3a4e2abf
Add AVRStudio 4 project files to the ClassDriver Device mode demos.
14 years ago
f985a8c176
Add AVRStudio 4 project files to the LowLevel Device mode demos.
14 years ago
658da63e6c
Add AVRStudio 4 project files to the ClassDriver Host mode demos.
14 years ago
20943fa1aa
Add AVRStudio 4 project files to the LowLevel Host mode demos.
14 years ago
975e9d772d
Add AVRStudio 4 project files for the library bootloaders.
14 years ago
3904c1a606
Add remaining AVRStudio project files to the library projects.
14 years ago
ac61b81a0b
Add first lot of AVRStudio project files for some of the library projects.
14 years ago
d3e00ce1ec
Rename the AVRISP main source files to AVRISP-MKII so that it matches the project name. Add AVRStudio project file for the AVRISP-MKII project.
14 years ago
1167b69943
Add missing eol-style properties to new source files.
14 years ago
ae9dab1398
Add missing clean_doxygen phony targets to the project makefiles.
14 years ago
8de31cbb78
Reduce prescaler of the flush timer in the USBtoSerial demo, so that buffer overruns will not occur regardless of hardware and baud rate settings.
14 years ago
0bcc82ac28
Alter the ring buffer library headers to have both atomic and non-atomic insertion/removal routines. Modify the existing projects so that buffer operations performed in an ISR use the shorted non-atomic versions, as they are already performed in a blocking ISR.
...
Alter USBtoSerial demo so that it does not enter a blocking loop to send data from the USB to the USART, as this can cause dropped bytes in the reception code if large amounts of data are sent in both directions at the same time. Added a flush timer to the USBtoSerial code for the USART to USB interface, so that multiple bytes can be sent in the same USB packet.
14 years ago
3fd246041b
Add glitch protection to the software UART in the XPLAINBridge project code, so that very short glitches on the RX line don't cause a frame reception to occur.
14 years ago
229935184b
Major changes to the XPLAINBridge software UART code for performance and reliability. New code reduces the number of missed characters and misread characters.
14 years ago
2b0d93c129
Correct misspellings in the Bluetooth demo code.
14 years ago
f6e84eabce
Add more doxygen function documentation to the RFCOMM layer.
14 years ago
00fa6aa2db
Oops - ACL layer Bluetooth_SendPacket() function should check and allow NULL channels, since that indicates a control channel request.
...
Fix up Doxgen documentation for the Bluetooth stack code.
14 years ago
6276d5f82a
Rename Bluetooth stack function parameters to clearly indicate what sort of Bluetooth channel (ACL, RFCOMM) is required for each parameter, to make the code easier to read.
...
Add a new RFCOMM_ChannelSignalsReceived() Bluetooth stack callback from the RFCOMM layer for when the remote device sends new terminal control signals.
Fix RFCOMM_SendData() not aborting correctly when the requested RFCOMM channel is not found.
14 years ago
ba711d6759
Oops - fix errors in the MassStorageKeyboard SCSI driver file due to incorrect copy/paste.
14 years ago
c326fe9605
Rewrote the implementation of the SwapEndian_16() and SwapEndian_32() functions so that they compile down in most instances to minimal loads and stores rather than complicated shifts.
...
Fixed SCSI.c implementations of all the demos/projects casting the block count to a 32-bit temporary before calling SwapEndian_16().
14 years ago
2b0e86243f
Add a new RFCOMM_ChannelOpened() callback event for when logical RFCOMM channels are opened in the BluetoothHost demo. Make the demo echo back sent characters to the remote device.
14 years ago
c37fd0ef91
Add a new RFCOMM service callback for when new data has been received on a valid RFCOMM channel.
14 years ago
70983caea5
Move out Bluetooth stack callback functions to a seperate BluetoothEvents.c/.h set of files for clarity in the Incomplete BluetoothHost demo. Add a new stack callback for opened ACL channels, make the demo save the RFCOMM channel when opened so that it does not have to search for it on each iteration of the main program loop.
14 years ago
dea897ef57
Make main readme file easier to read, and make documentation build instructions clearer.
14 years ago
35b7946950
Improve commenting of the Dataflash stub board driver file, to prevent confusion of what the dataflash selection masks need to be. Update stub driver to automatically interleave data between the chips if two Dataflash chips are present.
14 years ago
8b053d6ba5
Added new Drivers/USB/LowLevel/Device.c file to house Device mode specific functions that are more complicated than simple macros. Moved USB_Device_SendRemoteWakeup() to the new Device.c source file and corrected it to unfreeze and restart the USB controller clock before issuing a Remote Wakeup request.
...
Removed the USB_Device_IsRemoteWakeupSent() and USB_Device_IsUSBSuspended() macros, as they are now obsolete.
14 years ago
31a34154db
Move out RFCOMM channel structure init code to a seperate routine, to save on compiled code space and to prevent copy-paste errors.
14 years ago
fbabecee66
Add RFCOMM service routine, to send pending configuration requests on RFCOMM channels. Add in RFCOMM channel config flags, to determine which configuration commands have been sent and received.
...
Add a new RFCOMM_SendChannelSignals() function to transmit a change in V24 terminal handshake lines to the receiving device.
Prevent SABM packets sent to the control DLCI in the RFCOMM layer from creating a new channel entry, as the control DLCI does not have connection data associated with it.
Fix up MSC control packet handling so that received responses can be acknowledged correctly, so that the RFCOMM layer can record when the receiving device has ACKed a sent change in V24 terminal handshake lines.
14 years ago
b656540468
Make Bluetooth ACL channel searches skip over closed (invalid) channels. RFCOMM channels are considered invalid when the channel state is closed, not when the DLCI is zero - fix incorrect code.
14 years ago
Dean Camera