63552a11ce
Removed code that has been merged upstream.
8 years ago
df04231957
Re-enabled the Z Offset graphics overlay.
...
- Re-enabled the Z offset graphics overlay that was pushed to upstream Marlin by us.
- Restored the look of the arrows since upstream decided to change it and introduced some missed pixels in the process.
8 years ago
b1b309b33d
Enable scroll long names and manual progress bar.
8 years ago
c9035a122d
Fixes to 1.1.8 merge.
8 years ago
310951f92e
Merge remote-tracking branch 'origin/upstream_1.1.8' into devel
8 years ago
046c594ee4
Corrected hours computation for Hibiscus.
8 years ago
b65c4e06d2
Reorg'd files to allow build from Arduino IDE.
...
To build Hibiscus, it is only necessary now to sym link to
ArduinoAddons/arduino-1.8.3/libraries/TMC2130Stepper from
the Arduino libs directory.
8 years ago
6640d8175f
Adjustments for Hibiscus Beta.
8 years ago
04a4d72b2e
Boot screen no longer shown when activating menu.
...
- On Hibiscus, will allow SD card to be inserted/removed without garbled screen
- On other FW, will eliminate boot screen flash when entering menu.
8 years ago
4d315a693d
New FW release .72 for Hibiscus.
8 years ago
12f0b20f8f
Removed unneeded Hibiscus variants.
8 years ago
d80aa70c24
Improved status screen for Hibiscus and Quiver.
8 years ago
ac85819cce
Workaround for OctoPrint failures (T1598).
...
Added delay to temperature report to allow OctoPrint to catch up.
Backport of upstream fix 6ed2840615
8 years ago
92e058742a
Adjusted cutoff for RELOC_WORKAROUND.
8 years ago
578391effc
Automatic support for Jessie vs. Stretch.
...
- Automatically define RELOC_WORKAROUND on Jessie and
disable it on Stretch.
8 years ago
850a0b53f5
New PID settings for E3D_Titan_Aero (T1643).
...
- Added new values as provided by West.
8 years ago
0640bd0282
Version 1.1.8
8 years ago
21ba70d587
Fixups for 1.1.8
8 years ago
9129996964
Compatibility fixes with older Minis (T1458)
...
- Adjusted build area to sit squarely in the middle of Foxglove/Euphorbia
build plate **
- Added fix to G29 for incorrect rewipe location on Foxglove/Euphorbia (T1458)
** When using this FW it is advised to adjust the wipe Y location in
the Mini start GCODE to Y=172
8 years ago
d88d515a92
Compatibility fixes for older Minis (T1458)
...
- Set Mini X_MIN_POS to -0.1, so X=0 does not ride against X_MIN endstop. This
prevents moves along X=0 from failing once a bed compensation matrix has been
loaded. This caused G29 to fail if used multiple times in a row.
- Before rewipe in G29, added move to (X_MIN_POS,Y_MAX_POS). This is a workaround to
prevent the Y coordinate shift duing G29 on older Minis from causing the rewipe to
miss the wiper pad.
- Changed Mini baud rate to 250000 since this is more reliable.
- Disable the extruder motor while probing on all Mini toolheads. This was
done before just on the Aerostruder, but I saw the same symptoms on a
standard toolhead on a Gladiola.
8 years ago
6fe2c33334
Adjusted wipe height for Mini (T1576)
8 years ago
dfb8a12a96
Add Hibiscus geared prototype. Increase tx buffer.
...
- Added Hibiscus_EinsyGearedMini2LCD variant.
- Increased TX_BUFFER_SIZE as recommended for ADVANCED_OK (may affect T1598, but does not appear to fix that issue)
8 years ago
dcd405275c
Merge remote-tracking branch 'upstream/bugfix-1.1.x' into release_version_118
8 years ago
99f98890c2
Merge pull request #8892 from thinkyhead/bf1_action_on_action
...
[1.1.x] Fixes for G29 / 3POINT
8 years ago
5f0026893f
Fix some compiler warnings
8 years ago
4f943a73bc
Fixes for G29 / 3POINT
8 years ago
e31923be8d
lcd_map_control deps on ULTIPANEL
8 years ago
395235a529
Merge pull request #8891 from thinkyhead/bf1_action_on_action
...
[1.1.x] Allow consecutive uses of G29
8 years ago
55848a4bd8
Allow consecutive uses of G29
8 years ago
19e768d43d
Merge pull request #8849 from silentninja1/patch-3
...
[1.1.x] //Actions on Pause / Resume (M600, M125, etc.)
8 years ago
3c7cdcdc22
General cleanup of config-store, reset_bed_level
8 years ago
e0d487e339
Update TMC2208 config store
8 years ago
defff1e4a8
Fix GT2560 A+ servo pins
8 years ago
05a6d48753
Tweak to M125 code
8 years ago
b12eb33feb
Add support for pause and resume action commands on M600
8 years ago
00749d8ef0
Add pause/resume action to example configs
8 years ago
59d047c1d7
[1.1.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE ( #8864 )
...
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
8 years ago
fb6b62a01b
Comment `return false` in motion functions
8 years ago
1bb5791e64
Merge pull request #8888 from thinkyhead/bf1_reduce_jerk_default
...
[1.1.x] Reduce default jerk
8 years ago
e47316c9d3
Tweak cleaning buffer / SD finished command
8 years ago
88c0688961
Reduce default jerk. XY by half. Z by 1/4
8 years ago
aa9cad0cc6
Merge pull request #8870 from petrzjunior/bugfix-1.1.x
...
[1.1.x][Language] Update Czech for Dec 2017
8 years ago
0950527437
Fix WELCOME_MSG in PT
...
From #8879
8 years ago
b7306ef07f
Fix WELCOME_MSG in PT
...
From #8879
8 years ago
0fc3fea8df
Update Czech language Dec 2017
8 years ago
b5677907d0
Minor speedup for SCARA scaling
...
And cleanup of Delta IK macros...
8 years ago
6f40d57e14
Merge pull request #8851 from thinkyhead/bf1_more_scara_scaling
...
[1.1.x] SCARA Feedrate Scaling for G2/G3 - using HYPOT
8 years ago
20f6a4582d
Version 1.1.7
8 years ago
e0dba46271
Merge latest bugfix-1.1.x
8 years ago
2aaf66b789
Merge pull request #8847 from thinkyhead/bf1_restore_position_float
...
[1.1.x] Restore position_float to LIN_ADVANCE
8 years ago
Marcio Teixeira